A clay ball (mass = 0.25kg) has a rightward momentum of +1.75 kg∙m/s. A second clay ball (mass = 0.25 kg) has a leftward momentum of -1.75 kg∙m/s. The two collide, stick together, and come to a complete stop after the collision.1) What was the total energy of the system before the collision?a- Not enough information to determineb- 6.13 Jc- 0 Jd- 12.25 J2) What was the total energy of the system after the collision?a- 6.13 Jb- 12.25 Jc- Not enough information to determined- 0 J3) What was the total momentum before the collision?a- 6.13 kg∙m/sb- 12.25 kg∙m/sc- Not enough information to determined- 0 kg∙m/s4) What was the total momentum after the collision?a- Not enough information to determineb- 0 kg•m/sc- 6.13 kg•m/sd- 12.25 kg•m/s

tan0=1.95 and tan0=0.605 are two solutions. 0 = 63 and theta 0 = 31 are the corresponding (first quadrant) angles.

The elevation angle is the angle between the horizontal line of sight and the object when standing and looking at something. The angle of depression is the angle between the horizontal line of sight and the object if the person is standing and looking down at the object. The rise or rise of something is called elevation. Mountains have an elevation based on their height, and your mood rises the happier you are. Elevation is a noun that describes the height of something above a surface or ground line. It is also a term of measurement for things like temperatures or degrees.

Learn more about elevation here-

https://brainly.com/question/481548

#SPJ4

In physics, a system is said to be in equilibrium when neither its internal energy state nor its state of motion tend to vary over time. If all of the forces operating on a single particle are vector summated to zero, equilibrium occurs.

In physics, tension is the pulling force that is conveyed axially by a string, cable, chain, or other similar one-dimensional continuous item, or by either end of a rod, truss member, or other similar three-dimensional object.

Equilibrium refers to the state of a system when neither its internal energy state or state of motion tend to change over time. Equilibrium for a single particle occurs when the vector sum of all force acting on the particle is zero.

To know more about equilibrium click on the link:

https://brainly.com/question/12894603

#SPJ4

You used insight in this situation to find a solution to which you struggling to solve.

On the three aspects of process, task, and phenomenology, there are various definitions of insight (Llinger and Knoblich, 2009). Process is concerned with the cognitive processes that result in clever answers. An analytical process emphasises a deliberate and systematic evaluation of the problem, emphasising logical deduction and strategic thinking, as opposed to descriptions of insightful problem solving processes that emphasise a sudden certainty of a correct response with little to no conscious access to the processing of the solution. It is widely recognised that it is difficult to measure a subjective experience like insight objectively (Llinger and Knoblich, 2009; Ash et al., 2009). In the past, researchers have made use of "classic insight problems," vague issues that Gestalt psychologists first utilised to induce feelings of insight upon realising the solution.

Learn more about insight here:

https://brainly.com/question/8009419

#SPJ4

a) The time taken is 4.44 s

b) The force that keeps it moving is 15188 N

c) The centripetal force is responsible for the motion in the circular path.

d) The coefficient of the friction is 1.03

The centripetal force is the force that keep the object moving in a circular path. In this case, we need to find the how long does it take the car to do a lap around the track.

a) The time that is taken is the radio of the distance to the speed of the object. Thus the time that is taken =  200 m/45 m/s = 4.44 s

b) The net force that acts on the car as it is negotiating the circular path is given as; mv^2/r = 1500 * (45)^2/200

= 15188 N

c) The centripetal force keeps the car on the circular path

d) The coefficient of static friction is; 15188 N/1500 kg * 9.8 m/s^2

= 1.033

Learn more about centripetal force:https://brainly.com/question/11324711

#SPJ1

Answer: 00.99m

Explanation:

because

Answer: 0.099

Explanation: Khan

Answer:

  36 years

Explanation:

Given the equation of Kepler's third law as T² = a³, you want to know the period of an asteroid that has an orbital radius of 11 au.

Solving the given equation for t, we find ...

  T = a^(3/2) . . . . . . take the 1/2 power

Then for a=11, the period in years is ...

  T = 11^(3/2) ≈ 36.48

The period of the asteroid is about 36 years.

The combined velocity of the car and the chair is 1.5 m/s.

By the use of the law of the conservation of linear momentum we know that the total momentum before collision is equal to the sum of the final momentum after collision.

We have to first obtain the momentum of the system before and after the collision has occurred as we see below;

Then we have;

Momentum before collision = 2 Kg * 60 m/s = 120 Kgm/s

Momentum after Collison = 80v Kgm/s

Momentum = mv

m = mass of the object

v = velocity of the object

Using the principle of the conservation of momentum;

120 = 90v

v = 120/80

v = 1.5 m/s

Learn more about momentum:https://brainly.com/question/904448

#SPJ1

If a bird flying 3.45 m / s directly north feels a window directly east and accelerates 0.558 m / s², then its velocity after 5.25 seconds would be

There are three equations of motion given by  Newton,

v = u + at

S = ut + 1/2×a×t²

v² - u² = 2×a×s

As given in the problem If a bird flying 3.45 m / s directly north feels a window directly east and accelerates 0.558 m / s²,

By using the first equation of motion,

v = u + a × t

v = 3.45 + 0.558 × 5.25

v =  6.537 m / s

Thus, its velocity after 5.25 seconds would be 6.537 m / s

Learn more about equations of motion here,

brainly.com/question/5955789

#SPJ1

Answer:

  about 4.53 m/s 40.3° east of north

Explanation:

You want the velocity of a bird flying 3.45 m/s north after being accelerated by a wind at 0.558 m/s² directly east for 5.25 seconds.

The attached table shows the result of the acceleration. The change in "x" velocity is the product of the acceleration and time. The y-velocity is unaffected by the easterly acceleration.

The magnitude of the final velocity is the root of the sum of the squares of its components:

  Vf = √(2.9295² +3.45²) ≈ 4.5226 . . . . m/s

The direction of the final velocity is ...

  arctan(3.45/2.9295) ≈ 49.7° . . . . . CCW from east

The magnitude of the bird's final velocity is about 4.53 m/s. Its direction is about 40.3° east of north, or 49.7° north of east. The components of the velocity are about 2.93 m/s east and 3.45 m/s north.

__

Additional comment

The second attachment shows the bird's direction as a "bearing" angle, conventionally measured clockwise from north. The answer above gives the complementary angle, measured CCW from east.

Problem values are given to 3 significant figures, so we have rounded results to that precision.

Answer:

Knees to Chest

Be consistent. Setting and committing to a regular practice of yoga is absolutely essential if you want to make improvements. ..

Answer: Dog pose was really easy, but tree pose was really difficult because it was hard to balance.

The mass of a blow dart that experiences a blowing force of 0.20 Newtons and travels the length of the 1.2 meter barrel in 0.04 seconds is 0.26 g

a = v / t

v = d / t

a = Acceleration

v = Velocity

d = Distance

t = Time

d = 1.2 m

t = 0.04 s

v = 1.2 / 0.04

v = 30 m / s

a = 30 / 0.04

a = 750 m / s²

According to Newton's second law of motion,

F = m a

F = Force

m = Mass

F = 0.2 N

m = F / a

m = 0.2 / 750

m = 2.6 * [tex]10^{-4}[/tex] kg

m = 0.26 g

Therefore, the mass of a blow dart is 0.26 g

To know more about Newton's second law of motion

https://brainly.com/question/13447525

#SPJ1

If we have an ideal spring and attach a mass of 3.75 kg to it such that the spring extends from 12 cm to 13.40 cm, then its spring constant is 2678.57 N/m

When a force applied to a spring, then according to the Hooke's Law:

F = - k. x

Where:

F = applied force

k = spring constant

x = change in spring's length

The minus sign indicates that the displacement and the restoring force is in the opposite direction.

The given parameters:

x1 = 12 cm

x2 = 13.4 cm

Hence,

x = x2 - x1 = 13.4 - 12 = 1.4 cm = 1.4 x 10⁻² m

F = 3.75 . 10 = 37.5 N

Then,

k = F/x = 37.5 / (1.4 x 10⁻² ) = 2678.57 N/m

Complete question:

An ideal spring of negligible mass is 12.00 cm long when nothing is attached to it. when you hang a 3.75 kg object from it, you measure its length to be 13.40 cm. What is the spring constant?

Learn more about spring constant here:

https://brainly.com/question/23885190

#SPJ4

The statement that describes what happens in the graph is option (B).

The lander's velocity decreases toward the reference.

Velocity time graph is a type of graph that describes the change in velocity with respect to time of motion of an object.

Below is the basic explanation of the behavior of the average velocity of the particle with time.

Thus, we can conclude that between 20 and 25 seconds in the velocity tike graph, the average velocity of the object decreased towards the reference point (reference velocity = - 40 m/s.).

Learn more about average velocity here: https://brainly.com/question/24739297

#SPJ1

a)It is possible for the magnetic force on a charge moving in a magnetic field to be zero. The force acting on the charge is zero when a charge is moving in the same or opposite direction of the magnetic field.  When a is charge moving parallel in the same direction of the magnetic field, then the magnetic force  is zero.

b)It is not possible for the electric force on a charge moving in an electric field to be zero. If there's a charged particle in a magnetic field, it's impossible for this force to become zero.

c)It is not possible for the resultant of the electric and magnetic forces on a charge moving simultaneously through both fields to be zero. The magnetic force can be zero but the electric force cannot be zero because it is not affected by the motion of the particles.

To know more about electric and magnetic force, refer

https://brainly.com/question/1594186

#SPJ4

The speed of the ball during centripetal motion is 4.75 m/s.

We need to know about centripetal force to solve this problem. When an object moves in a circular motion, the object is experiencing centripetal force. The magnitude of centripetal force is

Fc = m . v²/R

where Fc is the centripetal force, m is mass, v is velocity and R is the radius.

From the question, we know that

m = 0.11 kg

F = 4 N

R = 0.62 m

The tension in the string is equal to centripetal force

T = Fc

4 = m . v²/R

4 = 0.11 . v² / 0.62

v² = 22.55

v = 4.75 m/s

Find more on centripetal force at: https://brainly.com/question/898360

#SPJ4

The acceleration of an unwary football player during uniform motion is 21.675 m/s² with a positive direction.

We need to know about the uniform motion to solve this problem. The uniform motion is an object's motion under acceleration. It should follow the rule

vt = vo + a . t

vt² = vo² + 2a . s

s = vo . t + 1/2 . a . t²

where vt is final velocity, vo is initial velocity, a is acceleration, t is time and s is displacement.

From the question above, we know that

vo = 5.1 m/s

s = 0.6 m

vt = 0 m/s

By substituting the given parameters, we can calculate the acceleration

vt² = vo² + 2a . s

0² = 5.1² + 2a . 0.6

1.2a = - 26.01

a = 21.675 m/s²

Find more on uniform motion at: https://brainly.com/question/28040370

#SPJ4

The speed of the protons v is 1.089[tex]e^{8}[/tex] m/s.

Every atom has a proton, a subatomic particle, in its nucleus. The particle has an electrical charge that is opposite to the electrons and is positive.

To establish a potential difference, a unit of positive electric charge must be transported from one location to another.

Here we are given a potential difference as 62MV= 62[tex]e^{6}[/tex]V

Now, as per classical definition, equation P.E. and the K.E.

So we have,

qV = 1/2[tex]\frac{m}{s^{2} }[/tex]

V is the potential difference and v is the velocity.

v = [tex]\sqrt\frac{2qV}{m}[/tex]

By substituting the values we get,

v = 1.089[tex]e^{8}[/tex] m/s

The speed of the protons v is 1.089[tex]e^{8}[/tex] m/s.

To know more about potential differences, visit:

https://brainly.com/question/12198573

#SPJ4

A patient's tumor is being treated with proton-beam therapy. The protons are accelerated through a potential difference of 62 MV. What is the speed of the protons? (Note: The speed is high enough that, in principle, we should use a relativistic calculation something you'll learn about in Chapter 27 but for this problem, you should use the formulas you are already familiar with.)

Add the eyepiece's power, typically 10X, to the objective's (4x) power to get the overall magnification. Total magnification for 4x lens is 40x and 10x is 400x.

Make sure the 4X scanning objective is locked into position and the stage is completely down before viewing a slide through the microscope.

Set the slide over the aperture that you want to see, then carefully place the stage clips on top of the slide to secure it in place.

Start with the 4X objective, keep both eyes open while looking through the eyepiece (if necessary, cover one with your palm), and gradually raise the stage using the coarse adjustment knob until the image is clear. The coarse adjustment knob will only need to be used once during the operation. You will be utilizing parfocal microscopes, which means that the image. Things appear 40 times bigger than they are using a 40x objective. Comparing objective magnification is relative. The capacity of a microscope to create an image of an object at a scale bigger (or even smaller) than its real size is known as magnification.

Learn more about magnification here:

https://brainly.com/question/21370207

#SPJ4

Answer:

m v1 = M V + m v2              conservation of momentum

V = m (v1 - v2) / M

V = .022 (240 - 125) / 1.7 = 1.49 m/s

The volume of the cylinder is 1.57 x 10⁻³ m³.

V = πr²h

V = π(5cm)²(20cm)(1m/100cm)³

V = 1.57 x 10⁻³ m³

The mass of the cylinder is 12.25 kg.

ρ =  m/v

m = ρv

m = (7800 kg/m³)(1.57 x 10⁻³ m³)

m = 12.25 kg

We wouldn't be able to observe the black hole if the accretion disc in it didn't create any light. Due to the black hole's intense gravitational pull, these particles spin at incredibly high speeds, producing an accretion disc and radiation in the process.

Therefore, there is no light when the accretion disc is absent.

Please refer to the solution for this step.

So, option an is the proper response. All other possibilities are false.

Please refer to the solution for this step.

A is the right response in this case.

To know more about the black hole visit here :

https://brainly.com/question/15370893

#SPJ4

If the coefficient of kinetic friction between two sliding surfaces is μ and the normal force between them is N, then the kinetic friction between them is given by μ = F/N . Therefore N= 800.

Given

kinetic friction μ = 0.3

and kinetic friction μ = F/N

N =  normal force

where F = frictional force

F = 240 n

N = F/μ

= 240 n/0.3

N = 800 n

There are two types of friction kinetic friction, also known as dynamical friction, and static friction. A force acting in opposition to the direction of a moving body on the surface is felt. The two materials' coefficient of kinetic friction will determine how much force is applied.  Kinetic friction occurs whenever two surfaces slide past one another. The application of brakes to tyres, the movement of an object across the ground, such as a box, or the rubbing of sandpaper all cause kinetic friction. The coefficient of friction, which measures the relationship between the frictional force and the normal force, provides a good description of friction. It obstructs the motion of several different items.

Learn more about kinetic friction here:

https://brainly.com/question/17237604

#SPJ4

The velocity of the car just before breaking 35.9 m/s

Braking distance, s = 92.0 m

Deacceleration = 7 m/s²

Speed of the car when stopped, =0

Let the speed of the car  just before braking, =0

Using the equation of motion ²=²+2as

² = ² - 2as

² = 0² - 2(-7)(92.0)

² = 1288

≈ 35.9 m/s ← speed of the car just before breaking

Acceleration can be defined as a vector quantity that determines the rate at which an object changes its velocity. An object continues to accelerate as it changes its speed over and over again.

Acceleration has nothing to do  with changing the target's movement speed. If an object does not change its speed, then the object is not accelerating. The data on the right represents an object moving north. The speed of the target changes over  time. In fact, the speed changes by a constant amount - ie. 10 m/s - every second. When the speed of an object changes, the object is said to be in accelerated motion or  acceleration.

To learn more about acceleration, visit;

https://brainly.com/question/16768483

#SPJ13

If you have a tire blowout when driving on the highway, you should not use your brakes until the vehicle has nearly rolled to a stop.

If you have a tire blowout when driving on the highway, you should not use your brakes until the vehicle has nearly rolled to a stop because at high speed the deviation is more.

Rolling is a type of motion that combines rotation and translation of that object with respect to a surface, such that, if ideal conditions exist, the two are in contact with each other without sliding. Rolling where there is no sliding is referred to as pure rolling.

To learn more about rolling motion see the link

https://brainly.com/question/8609890

#SPJ1

The other force has magnitude of 2.41 N and direction opposite to that of force 3.71 N parallel to x axis

Let the other force=P

work done=total force*displacement

16.7=(P+3.71)*11

P+3.92=1.51

P=-2.41

Newton is the abbreviation for the SI unit of absolute force known as newton (N). It is described as the amount of force required to accelerate a kilogram of mass by one meter per second. In the foot-pound-second (English, or customary) system, one newton is equivalent to around 0.2248 pounds of force or 100,000 dynes in the centimeter-gram-second (CGS) system.

The newton was given its name in honor of Sir Isaac Newton, whose second rule of motion outlines the modifications that a force may cause in a body's motion.

To know more about  force visit :https://brainly.com/question/13191643

#SPJ4

The ratio of the kinetic energy of particle b of mass 2m and a speed 2v to the kinetic energy of particle a of mass m and a speed v is 8 : 1

K = 1 / 2 m v²

K = Kinetic energy

m = Mass

v = Velocity

Let kinetic energy of particle a be K1 and kinetic energy of particle b be K2.

For particle a,

K1 = 1 / 2 m v²

For particle b,

m = 2m

v = 2v

K2 = 1 / 2 ( 2 m ) ( 2 v )²

K2 = 4 m v²

The ratio of the kinetic energy of particle b to the kinetic energy of particle a,

K2 / K1 = ( 4 m v² ) / ( 1 / 2 m v² )

K2 / K1 = 8 / 1

Therefore, the ratio of kinetic energy of particle b to the kinetic energy of particle a is 8 : 1

To know more about kinetic energy

https://brainly.com/question/999862

#SPJ1

Answer: [tex]2666.67 \text{ (or in 2 sigfigs, }2.7\times10^{3})[/tex]

Explanation: [tex]1\text{ }\dfrac{\text{N}}{\text{m}^2} = 1 \text{ Pa}\\\\P=\dfrac{F}{A}\\\\P=\dfrac{800\text{ N}}{0.3\text{ m}^2} = 2666.\overline6 \text{ N/m}^2 \approx 2666.67 \text{ Pa} \approx 2.7 \text{ kPa}[/tex]

Don't know if you need to convert to other units but typically in physics it's left as N/m^2 or Pa.

The acceleration at the moment the train speed reaches 50.0 km/h is -0.74 m/s².

The acceleration of an object is the change in the velocity of the object with time.

a = Δv/Δt

where;

a = (vf - vi) / t

where;

Substitute the given parameters and solve for the acceleration of the train.

a = (13.89 m/s - 25 m/s) / (15 s)

a = -0.74 m/s²

Learn more about acceleration here: https://brainly.com/question/14344386

#SPJ1

From the calculation, the activity of the isotope is 70.7 Bq.

We define the term half life as the amount of a radioactive isotope that is left after a given time. It is in fact the time that it takes for only half of the amount of the radioactive isotopes that is in a sample to remain.

Recall that if a substance is radioactive, this implies that the sample is capable of spontaneous disintegration. The amount of the sample that is present tends to diminish in the system as time increases.

Give the fact that;

Ao = initial activity = 100Bq

A = activity after time t = ??

Time taken = 5 minutes

Half life of the isotope = 10 minutes

Now we know that;

A/Ao = (1/2)^t/t1/2

A/100 = (1/2)^5/10

A/100 =  (1/2)^1/2

A =  (1/2)^1/2 * 100

A = 70.7 Bq

Learn more about half life:https://brainly.com/question/24710827

#SPJ1

The gas's internal energy rises by 250 J when the value is positive. So, the increase in temperature of the gas is 250 J.

Any device addressing the relationship between heat and work must be designed with a working knowledge of thermodynamics. This method ignores actions that take place at the molecular level in favor of considering a particular amount of matter.

In macroscopic thermodynamics, the effects are based on observable, quantifiable quantities, and the attributes of the system are given to the system as a whole.

Work cannot "store" energy like the aforementioned forms can. It is merely a momentary manifestation process of energy transmission. Heat cannot transport energy either; it is merely a temporary manifestation process. Therefore, other types of energies in transition include heat and work.

by setting a limit, identifies the subject of the manifestation analysis. Either "a distinct collection of substance" or "a region in space" must be handled consistently.

To know more about manifestation click on the link:

https://brainly.com/question/15205517

#SPJ4

Answer:

F = 20 N

Explanation:

Given:

m = 0.12 kg

H = 2.3 m

S = 0.067 m

g = 9.8 m/s²

____________

F - ?

1)

Potential energy over grass:

Wp = m*g*H = 0.12*9.8*2.3 ≈ 2.7 J

2)

Work against the friction force of the grass:

A = F₁*S

3)

According to the law of conservation of energy:

A = Wp

F₁*S = Wp

F₁ = Wp / S = 2.7 / 0.067 ≈ 40 N

4)

Average grass resistance strength:

F = F₁ / 2 = 40 / 2 = 20 N