Answer:
They have the same tensile strainExplanation:
Strain of a material is the ratio of its extension to its original length.
strain = e/lo
e is the extension
lo is the original length
For a copper rod;
e = 2.00 * 10^-2mm
lo = 1.00m
convert 1.00m to mm
1.00m = 1*10^-3mm
get the strain
Strain = 2.00 * 10^-2mm/1*10^-3mm
Strain = 2 * 10^{-2+3}
Strain = 2*10^1 = 20
For the steel
e = 2.00 * 10^-3mm
lo = 0.100m
convert 0.100m to mm
0.1m = 0.1*10^-3mm
0.1m = 10^-4mm
get the strain
Strain = 2.00 * 10^-3mm/10^-4mm
Strain = 2 * 10^{-3+4}
Strain = 2*10^1 = 20
Since the value of their strain are the same, this means that they a re under the SAME tensile strain. No one is greater that the other.
The rod under greater tensile strain is ; Neither of them i.e. They both have the same tensile strain
Given data :
Cross sectional area of copper rod = 0.5 cm²
Length of copper rod = 1.0 m = 1 * 10³ mm
Elongation of copper rod ( Ec ) = 2.0 * 10⁻² mm
For Steel
Cross sectional area of steel = 0.5 cm²
Length of steel rod = 0.1 m = 1 * 10² mm
Elongation of steel rod ( Es )= 2.0 * 10⁻³ mm
Determine the Tensile strain of each rod
i) For copper rod
Tensile strain = Ec / Length of copper rod
= ( 2.0 * 10⁻² ) / ( 1 * 10³ )
= 2.0 * 10⁻⁵
ii) For the steel rod
Tensile strain = Es / Length of steel rod
= ( 2.0 * 10⁻³ ) / ( 1 * 10² )
= 2.0 * 10⁻⁵
The Tensile strain for the copper rod and the steel rod is the same ( 2.0 * 10⁻⁵ ) This means that both rods are under the same tensile strain
Learn more : https://brainly.com/question/24024159
I will mark brainliest if right :)
Which features do sound waves have that ocean and light waves do not? Check all that apply.
compressions
rarefactions
amplitude
wavelength
crests
frequency
speed
(I know one is compressions but I can't figure out the others and i don't want to get it wrong, please help!!)
Answer:
Explanation:
compressions and rarefactions
Answer:
Compressions
-and-
Rarefactions
Explanation:
How is energy stored in food? Is the form of energy stored in food different from the form stored in gasoline? Explain.
Answer:
There are little tiny batteries that are contained within the molecules of the food. The sun charges these batteries, and when the food is eaten, the energy from the batteries flows through the acids in the stomach, which gives the person or animal energy. In gasoline, the energy is created when the gasoline is set on fire and burned, there is no energy within it already. So they are different forms of energy. Hope this helps!
You are designing a rotor ride for an amusement park. What design will enable the rider to feel the greatest Fn (Normal Force)?
a. Decrease the velocity of the ride and increase the radius
b. Decrease the velocity of the ride and decrease the radius
c. Increase the velocity of the ride and increase the radius
d. Increase the velocity of the ride and decrease the radius
Answer:
d. Increase the velocity of the ride and decrease the radius
Explanation:
The normal force in the amusement park ride is produced by the centripetal force. The formula for this force is given as follows:
Fn = mv²/r
where,
m = mass of the body,
v = velocity of the body
r = radius of the path
Therefore, it is clear from the formula that force has a direct relation with the square of velocity and inverse relation with the radius of path. Hence, the design that will enable the rider to feel the greatest Fn will be:
d. Increase the velocity of the ride and decrease the radius
Which option is the smallest particle that represents the compound carbon
dioxide?
A. A carbon dioxide molecule B. A carbon dioxide atom
C. A carbon atom and an oxygen atom
D. A carbon ion and an oxygen ion
HELPPPPP
PLEASE I NEED THIS ANSWER FASTTTT
Answer:The answer is A
Explanation: You can instantly eliminate b and d because an ion isn't mentioned, and it is impossible to have a carbon dioxide atom. C is incorrect because there has to be two oxygen's to create a carbon dioxide molecule.
Answer:
D. A carbon dioxide molecule
Explanation:
The planes LA534 and LA639 are coming in for a landing on the same runway which means they are each lowering their altitude. Note that LA534 is traveling at twice the speed of LA 639. What must they do to keep from crashing into each other on the runway
Answer:
plane LA534 will have to decrease it speed by twice that of plane LA639.
Explanation:
Since both planes want to land there must be a decrease in speed.
We are told that plane LA534 velocity is twice that of plane LA639.
Now for the two planes to land without a crash. the opposite or reverse will be the case in terms of deceleration, that is
Plane LA639 will have to decrease its speed by twice the decrease in speed of plane LA534
Find the range of a projectile launched at an angle of 30° with an initial velocity of 20m/s.
Answer:
The range is 35.35 m
Explanation:
Projectile Motion
It's the type of motion that experiences an object projected near the Earth's surface and moves along a curved path exclusively under the action of gravity.
Being vo the initial speed of the object, θ the initial launch angle, and [tex]g=9.8m/s^2[/tex] the acceleration of gravity, then the maximum horizontal distance traveled by the object (also called Range) is:
[tex]\displaystyle d={\frac {v_o^{2}\sin(2\theta )}{g}}[/tex]
The projectile was launched at an angle of θ=30° with an initial speed vo=20 m/s. Calculating the range:
[tex]\displaystyle d={\frac {20^{2}\sin(2\cdot 30^\circ )}{9.8}}[/tex]
[tex]\displaystyle d={\frac {400\sin(60^\circ )}{9.8}}[/tex]
[tex]d=35.35\ m[/tex]
The range is 35.35 m
A car of mass 1167 kg accelerates on a flat highway from 10 m/s to 28.0 m/s. How much work does the car's engine do on the car?
Answer:
Workdone = 465766038 Joules.
Explanation:
Given the following data;
Mass = 1167
Initial velocity = 10m/s
Final velocity =28m/s
To find the workdone;
We know that from the workdone theorem, the workdone by an object or a body is directly proportional to the kinetic energy possessed by the object due to its motion.
Mathematically, it is given by the equation;
W = Kf - Ki
W = ½MVf² - ½MVi²
Substituting into the equation
W = ½(1167)*28² - ½(1167)*10²
W = ½ * 1361889* 784 - ½ * 1361889 * 100
W = 533860488 - 68094450
Workdone = 465766038 Joules.
HELP! NEED THE ANSWER IN 6 MINS!!!!!!!!!!!!!!!
Answer:
C
Explanation:
What is another example of radiation
(A) Warm air rising
(B) Heat from an old-fashioned radiator
(C) Batteries
(D) Touching a stove and burring your hand
A positive ion is called a ____________ and a negative ion is called an
Answer:
Cation
Explanation:
Best way to remember this one is a CATion is PAWS-itive!
please help
im on my sisters acc btw lol
Answer:
Dumbell flys - Pectoral
One Arm Rows - Latissimus Dorsi (Lat)
Pushdowns - Triceps
Machine Back Press - Shoulders
Explanation:
A periodic wave is a wave that follows a repeating pattern as it propagates through space. That is, the oscillating pattern repeats at regular intervals of time. This repeating motion is also known as periodic motion
Answer:
Simple harmonic motionExplanation:
What is simple harmonic motion?
"Simple harmonic motion is a type of motion directed along a straight line, whose acceleration is fixed towards a point and is proportional to its distance from that point"
An object is said to be in simple harmonic motion if the following occurs:
• It moves in a uniform path.
• A variable force acts on it.
• The magnitude of the force is proportional to the displacement of the mass.
• The force is always opposite in direction to the displacement direction.
• The motion is repetitive and a round trip, back and
forth, is always made in equal time periods
When using a liquid as a solvent, what could be the state(s) of matter of the solute?
Answer:
Explanation:
it can be a gas like carbon dioxide in soda
it can be liquid like alcohol in water
it can be solid like sugar and salt
Answer
✔ all three states
Explanation:
TOOK THE TEST
The force that causes an object to follow a
circular path is
tion:
at o
1. an inertiali force.
2. a centripetal force.
3. a gravitational force.
CI
nents
stant
4. a fluid force.
Answer:
2.a centripetal force.
Which example illustrates Newton's second law?
A. A wheelbarrow remains stationary when no one pushes on it.
B. More mass is added to a wheelbarrow, and a larger force is
required to move it.
C. A person pushes a wheelbarrow, causing it to move forward.
D. The force of a wheelbarrow on the ground is equal to the force of
the ground on the wheelbarrow.
Answer:B
Explanation:
Mass
More mass is added to a wheelbarrow, and a larger force is required to move it - illustrates Newton's second law.
What is force?An object's push or pull is seen as exerting a force. The interaction of the objects produces push and pull. You can also use words like stretch and squeeze to describe force.
The definition of force in physics is: The push or pull on a mass-containing item changes its velocity.
Newton’s second law of motion states that “Force is equal to the rate of change of momentum. For a constant mass, force equals mass times acceleration."
Hence more mass is added to a wheelbarrow, and a larger force is required to accelerate, i.e., move it.
To find more about force, refer the link:
https://brainly.com/question/13191643
#SPJ2
At a local swimming pool, the diving board is elevated h = 9.5 m above the pool's surface and overhangs the pool edge by L = 2 m. A diver runs horizontally along the diving board with a speed of v0 = 2.7 m/s and then falls into the pool. Neglect air resistance. Use a coordinate system with the horizontal x-axis pointing in the direction of the diver’s initial motion, and the vertical y-axis pointing up. Let the y-axis be directed vertically down. Express the time t_w it takes the diver to move off the end of the diving board to the pool surface in terms of v_0, h, L, and g. Calculate the time, t_w in seconds, it takes the diver to move off the end of the diving board to the pool surface. Determine the horizontal distance, d_w in meters, from the edge of the pool to where the diver enters the water.
Answer:
1) The time it takes the diver to move off the end of the diving board to the pool surface, [tex]t_w[/tex], is approximately 1.392 seconds
2) The horizontal distance from the edge of the pool to where the diver enters the water, [tex]d_w[/tex], is approximately 5.76 meters
Explanation:
1) The given parameters are;
The height of the diving board above the pool's surface, h = 9.5 m
The length by which the diving board over hangs the pool L = 2 m
The speed with which the diver runs horizontally along the diving board, v₀ = 2.7 m/s
Taking [tex]t_w[/tex] = The time it takes the diver to move off the end of the diving board to the pool surface
Therefore, we have from the equation of free fall;
h = 1/2 × g × [tex]t_w[/tex]²
Where;
g = The acceleration due to gravity = 9.81 m/s²
Substituting the values, gives;
9.5 = 1/2 × 9.81 × [tex]t_w[/tex]²
[tex]t_w[/tex] = √(9.5/(1/2 × 9.81)) ≈ 1.392 s
The time it takes the diver to move off the end of the diving board to the pool surface = [tex]t_w[/tex] ≈ 1.392 s
2) The horizontal distance, [tex]d_w[/tex], in meters from the edge of the pool to where the diver enters the water is given as follows;
[tex]d_w[/tex] = L + v₀ × [tex]t_w[/tex] = 2 + 2.7× 1.392 ≈ 5.76 m
∴ The horizontal distance from the edge of the pool to where the diver enters the water ≈ 5.76 meters.
What current flows through a bulb if 360 C of charge moves through
a bulb in 20 minutes?
Answer: A current of 1 A is flowing in a circuit if a charge of 1 coulomb passes any point in the circuit every second.
1 Amp = 1 Coulomb per second
We can write this formula as:
Current (I) = Charge (Q) / Time (t)
Charge (Q) = Current (I) x Time (t)
Explanation:
Select the correct answer.
Which statement about pneumatic systems is true?
A.
Pneumatic systems generate greater force than hydraulic systems.
B.
Pneumatic systems are safe to use at any level of pressure.
C.
Pneumatic systems are more expensive than hydraulic systems.
D.
Pneumatic systems are cleaner than hydraulic systems.
Statement D about pneumatic systems is true. Pneumatic systems are cleaner than hydraulic systems.
What is the pneumatic system?Pneumatic systems are employed in a wide range of manufacturing and assembly applications. They can be used to transport objects on production lines as well as in maintenance facilities.
In hydraulic systems liquid is used as fluid for the force transmission. While in the pneumatic system air is used causing more cleanliness in the system.
The pneumatic systems are cleaner than hydraulic systems.
Hence, a statement D about pneumatic systems is true.
To learn more about the pneumatic system refer to:
https://brainly.com/question/20322086
#SPJ1
What happens to the minerals as gneiss forms from schist?
Answer:
Explanation:
Gneiss is a high grade metamorphic rock, meaning that it has been subjected to higher temperatures and pressures than schist. However, unlike slate and schist, gneiss does not preferentially break along planes of foliation because less than 50% of the minerals formed during the metamorphism are aligned in thin layers.
HEY GUYS IS THIS TRUE OR FALSE????????
Gregory's apartment catches fire, and he has to replace his sofa. Which policy will most likely cover the cost of replacing the sofa?
Answer:
Gregory's apartment catches fire, and he has to replace his sofa. Which policy will most likely cover the cost of replacing the sofa
i really need help with this
Answer:
The Moon
Explanation:
F=MA
160=98a
a=1.632563061m/s²
This value is closest to the Moon's value
What is electronegativity
A. An atoms ability to attract other electrons and form a chemical bond
Explanation:
Electronegativity is a measure of an atom's ability to attract shared electrons to itself. On the periodic table, electronegativity generally increases as you move from left to right across a period and decreases as you move down a group.
Answer:
A)
Explanation:
I took the test and got it right. Flvs
If forces acting on an object are unbalanced, which factor may result from an unbalanced force? A.The net force is negative. B.There is zero net force. C.The forces cancel each other out. D.There is no change in motion.
Answer:
A. The net force is negative.Explanation:
just took the test :)
Answer:
#AExplanation:
The U-tube contains a coloured liquid of density 9.6 x102 kg/m3. If the difference in height between the liquid levels in the two arms of the U-tube is 0.16m, calculate the excess pressure (above air pressure) in the cylinder. (Take g = 10 N/kg)
Explanation:
P = ρgh
P = (9.6×10² kg/m³) (10 N/kg) (0.16 m)
P = 1536 Pa
Rounded to two significant figures, the pressure is 1500 Pa, or 1.5 kPa.
PLEASE HELP ASAP...TIMED TEST. PLEASE ANSWER WITH AT LEAST A PARAGRAPH!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
A scientist wants to analyze signals from outer space. Her lab has sensors to detect sound waves, radio waves, and seismic waves. Which of these sensors will provide the best information? Explain your reasoning.
Answer: I am pretty sure that you should pick radio waves.
Explanation: The scientist should use radio waves. I think this because you can use the radio waves to analyze the signals from outer space. This will work much better than anything there, to analyze it the best possible.
The best I could do.
Pls someone help 10points!!!
The count rate of a rodioactive material is 800 count\min. If the half-life of the material is 4 days, what would the count rate be in 16 days later.
Answer:
it is 45
Explanation:
Two teams are competing in a tug-of-war contest. Team A is pulling at 4000N and Team B is pulling at 4900N is the opposite direction.
Answer:
There is 8900N of force on the rope and team B wins
Explanation:
An eagle is flying horizontally 16.4 meters above a lake at a speed of 9.3 m/s, carrying a small pumpkin in its talons. The pumpkin slips free. How far horizontally will the pumpkin travel after it slips from the eagle until it hits the ground?
Answer:
The horizontal distance the pumpkin will travel after it slips from the eagle is 17.02 m
Explanation:
Given;
height above the ground, h = 16.4 m
speed of the eagle, v = 9.3 m/s
The time it will take the pumpkin to fall at the given height is calculated as;
[tex]t = \sqrt{\frac{2h}{g} }\\\\t = \sqrt{\frac{2*16.4}{9.8} }\\\\t = 1.83 \ s[/tex]
The horizontal distance traveled at this time is given by;
x = vt
x = (9.3)(1.83)
x = 17.02 m
Therefore, the horizontal distance the pumpkin will travel after it slips from the eagle is 17.02 m
Which car is accelerating?
A) a car that is unmoving
B) a car that rounds a curve at a constant speed
C) a car travels in a straight line at a constant speed
D) a car is set to a constant speed of 60 miles per hour
Answer:
The car that is accelerating is B a car that rounds a curve at a constant speed
Explanation:
Although all of the cars are at a constant speed or not moving acceleration is the change in speed or the change of directions therefore making the only car changing directions your answer.
Answer:
its B (:
Explanation:
i took the test :)