A pilot wishes to fly 2500km due South. The air speed of the plane is 300km/h and there is a wind of 50km/h from the West. What heading should the pilot take and what is the time required to complete the flight?

Answers

Answer 1

Since there is a wind speed of 50 km/h to the west, this speed needs to be compensated by the heading of the plane.

If we decompose the plane speed, one component will be used to cancel out the wind speed:

To find the orientation theta, we can calculate the east component of the plane speed and equate it to the wind speed:

[tex]\begin{gathered} V_{\text{east}}=V_{\text{wind}} \\ V\cdot\sin (\theta)=50 \\ 300\cdot\sin (\theta)=50 \\ \sin (\theta)=\frac{50}{300}=\frac{1}{6} \\ \theta=\sin ^{-1}(\frac{1}{6}) \\ \theta=9.59\degree \end{gathered}[/tex]

Now, let's calculate the south component:

[tex]\begin{gathered} V_{\text{south}}=V\cdot\cos (9.59\degree) \\ V_{\text{south}}=300\cdot0.986 \\ V_{\text{south}}=295.8\text{ km/h} \end{gathered}[/tex]

Calculating the required time of flight, we have:

[tex]\begin{gathered} \text{distance}=\text{speed}\cdot\text{time} \\ 2500=295.8\cdot t \\ t=\frac{2500}{295.8} \\ t=8.45\text{ hours} \end{gathered}[/tex]

Therefore the orientation is 9.59° east of south and the time required is 8.45 hours.

A Pilot Wishes To Fly 2500km Due South. The Air Speed Of The Plane Is 300km/h And There Is A Wind Of

Related Questions

9.A stock car is moving at 25.0 m/s when the driverapplies the brakes. If it stops in 3.00 s, what is itsaverage acceleration?

Answers

The average acceleration a of an object that changes its speed from v_0 to v_f during a time interval t is:

[tex]a=\frac{v_f-v_0}{t}[/tex]

Since the car is initially moving at 25.0m/s and it stops in 3.00 seconds, then its final speed is 0m/s.

Replace v_f=0, v_0=25.0m/s and t=3.00s to find the average acceleration of the car:

[tex]a=\frac{0\frac{m}{s}-25.0\frac{m}{s}}{3.00s}=-8.333\ldots\frac{m}{s^2}[/tex]

Therefore, the average acceleration of the car when it stops from 25.0m/s in 3.00 seconds, is -8.33m/s^2.

A projectile is fired horizontally at an angle of 70° with the speed of 0.11km/s. Find the range and height. The final answer should be in meters. ​

Answers

In the given question projectile is fired horizontally at an angle of 70° with the speed of 0.11km/s ,(=110m/s).

to find the range and height

height=544.66m

time= 10.54 second

range=793.63m

vy=0

h=v^2sin^2θ/ 2g

v=0.11km/s  =110m/s

θ=70°

range=v^2sin2θ/ g

horizontal velocity,

vx= 110cos70=37.622 m/s

vertical velocity,

vy=110sin70=103.36 m/s

using the equation of motion

s=ut+1/2 at^2

range, s=0, t=total time taken

range= 110^2 sin 2*70/9.8

range=793.63m

t= vsinθ/ g

=110 sin 70/9.8

time= 10.54 second

s=(110sin 70)*10.54 +1/2(-9.8)* (10.54^2)

s=1089-544.34

height=544.66m

To learn more about projectile numerical, visit

https://brainly.com/question/13171352

#SPJ13

A 0.35-kg tennis racquet moving to the right at 20 m/s hits a 0.06-kg tennis ball that is moving to the left at 30 m/s. After the collision, the racquet continues to the right, but at a reduced speed of 10 m/s. What is the ball's velocity after the collision?

Answers

From conservation of momentum we have that:

[tex]0.35(20)-0.06(30)=0.35(10)+0.06v[/tex]

Solving for v we have that:

[tex]\begin{gathered} 0.35(20)-0.06(30)=0.35(10)+0.06v \\ 7-1.8=3.5+0.06v \\ 0.06v=7-1.8-3.5 \\ 0.06v=1.7 \\ v=\frac{1.7}{0.06} \\ v=28.33 \end{gathered}[/tex]

Therefore the velocity of the ball after the collision is 28.33 m/s

ectile mo
A rifle is aimed horizontally at a target 35.0 m away. The bullet hits the target hits the
target 2.10 cm below the aiming point. a) What is the bullet's time of flight? b) What is
its muzzle velocity?

Answers

the velocity of the muzzle would be 15 becuase you divide the target and the target below

Identify the different types of energy transformation in each1. windmill Energy Transformation:2. FlashlightEnergy Transformation:3. Firecracker Energy Transformation:4. Bicycle Energy Transformation:5.Microwave Energy Transformation:Nonsense answer-reportGreat answer-brainliest

Answers

We will have the following:

1. Windmill: From wnd energy to mechanical energy.

2. Flashlight: From chemical energy to ligth energy and thermal energy.

3. Firecracker: From chemical energy to thermal energy and kinetic energy.

4. Bycicle: From mechanical energy to kinetic energy.

5. Microwave: From electric energy to thermal energy,

how long must a 50 N force act on a 400 kg mass to raise its speed from 10 m/s to 12 m/s

Answers

Answer:

see below

Explanation:

F=ma

50 = 400 a

A = 50/400 = .125 m/s^2

Accel = change in v / change in t

      .125 =  (12-10) / t       Shows t = 16 seconds

Element x is a non metal in which position of the periodic table can element x be found

Answers

Answer:

To the right

Explanation:

Metals are to the left, nonmetals are to the right. There's a border I drew that separates nonmetals and metals

Sound _____. does not need a medium to travel is reflected when it bounces off a shiny surface moves in longitudinal waves is created by electric and magnetic fields

Answers

Answer:

reflection

Explanation:

it is a regular reflaction of light

Set the cannon to have an initial speed of 15 m/s. For which situation do you think the cannon ball will go the highest: if it is set at a 25-degree angle, or if it is set at a 35-degree angle?

Question 3 options:

25 degrees


35 degrees

Answers

The cannon ball will travel the highest distance when the angle of projection is 35 degrees.

What is the maximum height of a projectile?

The maximum height reached by a projectile is calculated using the following formula.

H = u²sin²θ/2g

where;

u is the initial velocity of the projectile θ is the angle of pojectiong is acceleration due to gravity

when the angle of projection is 25 degrees;

H = (15² (sin 25)²) / (2 x 9.8)

H = 2.05 m

when the angle of projection is 35 degrees;

H =  (15² (sin 35)²) / (2 x 9.8)

H = 3.78 m

Thus, the cannon ball will travel the highest distance when the angle of projection is 35 degrees.

Learn more about maximum height here: https://brainly.com/question/12446886

#SPJ1


In the experiment, the pressure of the gas is 1.2 x10^5 Pa at a temperature of 25.0°C.
When the cylinder is heated, the pressure reaches 2.1x10 Pa. Calculate the
temperature of the gas (in "C) at this pressure.

Answers

The temperature of the gas (in °C) at this pressure is 248.5 °C

Temperature is a bodily quantity that expresses the hotness of count or radiation. There are 3 kinds of temperature scales. Temperature is the degree of hotness or coldness of an item.

Temperature is a degree of the common kinetic energy of the debris in an object. whilst the temperature increases, the motion of those particles also increases. Temperature is measured with a thermometer or calorimeter.

Given;

P₁ = 1.2 x10⁵ Pa = 1.18430792

T₁ = 25.0°C = 298 K

P₂ = 2.1x10 Pa = 0.000207253886

T₂ = ?

using ideal gas equaion:-

PV = nRT

P₁/T₁ = P₂/T₂

T₂ = P₂T₁  /P₁

   = 2.1x10⁵ x  298 / 1.2 x10⁵

   = 521.5 K

   = 248.5 °C

Learn more about temperature here:-https://brainly.com/question/24746268

#SPJ9

If the displacement, velocity and acceleration at an instant of a particledescribing S.H.M are respectively 7.5m, 7.5m/s, 7.5m/s?. Calculate themaximum velocity of the particle.

Answers

We are given the displacement, velocity, and acceleration of a particle that describes Simple Harmonic Motion. We are asked to determine the maximum velocity of the particle. To do that we can use the following equation for the maximum velocity of a particle describing SHM:

[tex]v_{máx}=-A\omega[/tex]

Where:

[tex]\begin{gathered} A=\text{ amplitude} \\ \omega=\text{ angular frequency} \end{gathered}[/tex]

To determine the values of amplitude and angular frequency we can use the expressions for displacement, velocity, and acceleration. The expression for displacement is:

[tex]x=A\cos (\omega t)[/tex]

The expression for the velocity is:

[tex]v=-A\omega\sin (\omega t)[/tex]

And the expression for acceleration is:

[tex]a=-A\omega^2\cos (\omega t)[/tex]

Now, from the expression for the displacement we can solve for the amplitude, like this:

[tex]\frac{x}{\cos(\omega t)}=A[/tex]

Now we can replace this in the expression got eh acceleration:

[tex]a=-\frac{x}{\cos(\omega t)}\omega^2\cos (\omega t)[/tex]

Simplifying:

[tex]a=-x\omega^2[/tex]

Now we can solve for the angular frequency:

[tex]-\frac{a}{x}=\omega^2[/tex]

Taking square root to both sides:

[tex]\sqrt[]{-\frac{a}{x}}=\omega[/tex]

replacing the values:

[tex]\sqrt[]{-\frac{-7.5\frac{m}{s^2}}{7.5m}}=\omega[/tex]

Solving the operations:

[tex]1s^{-1}=\omega[/tex]

Now we divide the formula for the displacement and the formula for the velocity, we get:

[tex]\frac{v}{x}=\frac{-A\omega\sin (\omega t)}{A\cos (\omega t)}[/tex]

Simplifying we get:

[tex]\frac{v}{x}=-\omega\tan (\omega t)[/tex]

Replacing the known values:

[tex]\frac{-7.5\frac{m}{s}}{7.5m}=-(1s^{-1})\tan (t)[/tex]

Simplifying:

[tex]-1=-\tan (t)[/tex]

Solving for "t":

[tex]t=\arctan (1)=0.78[/tex]

Now we can replace these values in the formula for displacement to get the value of the amplitude:

[tex]x=A\cos (\omega t)[/tex]

Solving for the amplitude:

[tex]\frac{x}{\cos (\omega t)}=A[/tex]

Replacing the known values:

[tex]\frac{7.5m}{\cos (0.78)}=A[/tex]

Solving the operations:

[tex]10.6m=A[/tex]

Now we replace the values in the formula for the maximum velocity:

[tex]v_{\text{max}}=A\omega[/tex]

Replacing:

[tex]\begin{gathered} v_{\max }=(10.6m)(1s^{-1}) \\ v_{\max }=10.6\text{ m/s} \end{gathered}[/tex]

Therefore, the maximum velocity is 10.6 meters per second.

_______ is the study of the way all living things relate to each other in the world. The word comes from two Greek words which mean the study or science of the home.

Answers

Ecology is the study of the way all living things relate to each other in the world.

What is Ecology?

This is referred to as the science which deals with the study of organisms and how they interact with their environment. It comprises of the study of the organisms present and their habitat.

Their habitat is the area where they live which comprises of many resources such as food, water etc which are needed for their growth and survival. The living things interact with it for beneficial reasons and is the reason why Ecology was chosen as the correct choice.

Read more about Ecology here https://brainly.com/question/842527

#SPJ1

1) What is the horizontal force on block A due to block B?2) What is the net horizontal force on block B?3) What is the horizontal force on block B due to block C?

Answers

Given data:

Mass of each block;

[tex]m=12\text{ kg}[/tex]

Acceleration;

[tex]a=1.2\text{ m/s}^2[/tex]

The free-body diagram for A,

The free-body equation for A is given as,

[tex]F-N_1=ma\ldots(1)[/tex]

The free-body diagram for B is given as,

The free-body equation for B is given as,

[tex]\begin{gathered} F_B=N_1-N_2 \\ ma=N_1-N_2\ldots(2) \end{gathered}[/tex]

The free-body equation for C is given as,

The free-body equation for C is given as,

[tex]\begin{gathered} F_c=ma \\ N_2=ma\ldots(3) \end{gathered}[/tex]

Equating equation (2) and (3),

[tex]\begin{gathered} N_1-N_2=N_2_{} \\ N_1=2N_2 \\ N_1=2ma \end{gathered}[/tex]

Part (1),

The horizontal force on block A due to block B is given as,

[tex]\begin{gathered} F_{AB}=N_1 \\ =2ma \end{gathered}[/tex]

Substituting all known values,

[tex]\begin{gathered} F_{AB}=2\times(12\text{ kg})\times(1.2\text{ m/s}^2) \\ =28.8\text{ N} \end{gathered}[/tex]

Therefore, the net horizontal force on block A due to block B is 28.8 N.

Part (2)

The net horizontal force on block B is given as,

[tex]\begin{gathered} F_B=N_1-N_2 \\ =2ma-ma \\ =ma \end{gathered}[/tex]

Substituting all known values,

[tex]\begin{gathered} F_B=(12\text{ kg})\times(1.2\text{ m/s}^2) \\ =14.4\text{ N} \end{gathered}[/tex]

Therefore, the net horizontal force on block B is 14.4 N.

Part (3)

The horizontal force on block B due to block C is given as,

[tex]\begin{gathered} F_{BC}=N_2 \\ =ma \end{gathered}[/tex]

Substituting all known values,

[tex]\begin{gathered} F_{BC}=(12\text{ kg})\times(1.2\text{ m/s}^2) \\ =14.4\text{ N} \end{gathered}[/tex]

Therefore, the horizontal force on block B due to block C is 14.4 N.

This is astronomy and give explanations

Answers

The scientific study of all celestial objects is known as astronomy. Galaxies, planets, stars, comets, meteors, and other events affecting the celestial bodies are all observed and studied by astronomers.

The words "Astro," which means "star," and "nomos," which means "rule," are derived from ancient Greek. Astronomy, when combined, refers to "star law." The natural sciences are the ones that it is the oldest.

Since there are so many celestial objects to study, it is practical to divide astronomy into various branches.

Here are some of the more well-known astronomical fields-

1. Planetary Astronomy

2. Solar Astronomy

3. Stellar Astronomy

4. Galactic Astronomy

5. Observational Astronomy; etc.

Let's know more about its distinction with space exploration

https://brainly.com/question/1141458

A 2.55kg block on a horizontal floor is attached to a horizontal spring that is initially compressed 0.0360m . The spring has force constant 870N/m . The coefficient of kinetic friction between the floor and the block is 0.45 . The block and spring are released from rest and the block slides along the floor.

What is the speed of the block when it has moved a distance of 0.0200 m from its initial position? (At this point the spring is compressed 0.0160 m .)

Answers

The speed of the block when it has moved a distance of 0.0200 m from its initial position is 0.29 m/s.

The mass of the block is 2.55 Kg. Coefficient of kinetic friction is 0.45. Spring constant is 870N/m. The final compression of the spring is 0.0160 meters. The block is moved by distance of 0.0200 meters.

By considering the block-spring system, we can use Work energy theorem here,

According to work energy theorem,

Work done by conservative forces on the body + Work done by none conservative forces = Total change in kinetic energy of the body.

Work done by Conservative forces = 1/2Kx².

Where,

K is spring constant,

x is the compression in spring,

Work done by non-conservative forces = umgd

Where,

u is the coefficient of kinetic friction,

m is mass of the block,

d is the distance by which the block moves,

Here, we will take spring force as positive because the spring force and displacement both are in same direction,

Putting all the values,

1/2Kx² - umgd = 1/2mV² - 1/2mU²

1/2(870)(0.016)² - 0.45(2.55)(9.8)(0.02) = 1/2(2.55)V²

0.11136 - 0.22491= (1.275)V²

0.11355/1.275 = V²

V = 0.29 m/s.

To know more about work-energy theorem, visit,

https://brainly.com/question/22236101

#SPJ1

Imagine you are an alien from a distant galaxy. Your home planet does not have any gravity. You have just landed on Earth and make a few observations about the planet.

What are some ways you might first observe gravity?
How might you test gravitational force?
How would you describe gravity to other aliens back at your home planet?

Use details to support your answer.

Answers

The first thing an alien would notice about gravity on earth is how it affects their movement. If their planet is closer to the sun in their solar system, they'd be accustomed to a higher pull of gravity, hence weight. Based on the above, an alien will feel lighter on earth without auto-assistive gravity adjuster technology.

The simplest way to test gravity is by comparing my weight using "homemade" scales on the ship, then checking that against my weight off the ship.

The simplest way to describe Earth's gravity to those the home planet is to use scientific language. The acceleration of gravity at the Earth's surface is approximately 9.8 meters (32 feet) per second every second. This is constant.

What is Gravity?

Gravity, often known as gravitation, is a force that exists between all physical things in the universe. The force of gravity seeks to draw any two objects or particles with nonzero mass toward one other. Gravity affects things of all sizes, from subatomic particles to galaxy clusters.

Einstein proposed that the geometry of spacetime is what causes the force we call gravity. A mass (or energy) concentration, such as the Earth or sun, bends space around it in the same way as a boulder bends the flow of a river. As a result, gravity was created.

Learn more about Gravity:
https://brainly.com/question/557206

#SPJ1

Part 1 Assume that as a wave travels from one particular medium to another, its speed decreases. What happens to the wave's frequency?A.  Its frequency increases.B.  Its frequency decreases.C.  Its frequency remains the same.D.  It is impossible to determine without more data.Part 2Which best explains the correct answer to Part 1?A.  A wave's frequency always remains the same. B.  A wave's frequency is inversely proportional to its speed.C.  Given that the wave's wavelength remains the same, if the wave's speed decreases, then the frequency must decrease.D.   Given that a wave's speed is equal to the product of its wavelength and frequency, the wavelength must be known to determine the frequency. 

Answers

Answer:

Part 1

C. Its frequency remains the same.

Part 2

A. A wave's frequency always remains the same.

Explanation:

The relationship between wavelength, frequency, and speed is given as:

[tex]v=\lambda f[/tex]

When the frequency of a wave increases, its wavelength also increases.

The speed of a wave does not change as its frequency changes, and vice-versa.

Therefore, as the speed of the wave decreases, its frequency remains the same

A wave's frequency always remains the same regardless of the speed and wavelength

Consider a 1500kg rollercoaster moving at 4.5m/s at the top of a
30.0m hill. If instead, friction does 52kJ of work on the rollercoaster on its
trip down the hill, how fast will the rollercoaster be moving once it
reaches ground level?

Answers

The rollercoaster be moving once it reaches ground level with a speed of 23.21 m/s.

Applying work-energy theorem,

Work done by conservative forces on the body + work done by none conservative forces on the body = Total change in Kinetic Energy of the body.

Here, conservative forces are gravitational force and non-conservative force is frictional force,

MgH - Fr = 1/2MV² - 1/2MU²

Where,

M is mass of roller coaster,

g is acceleration due to gravity,

H is the height of the roller coaster,

Fr is the frictional force,

V is the final velocity of roller coaster,

U is the initial velocity of the roller coaster,

1500(9.8)(30) - 52000 = 1/2(1500)(V²-20.25)

(441000 -52000)2/1500 = V² - 20.25

518.67 = V² - 20.25

V² = 538.9

V = 23.21 m/s.

To know more about work energy theorem, visit,

https://brainly.com/question/6458994

#SPJ1

Which ideas describe the big crunch? (1 point)

O After the universe reaches its expansion limit, gravity will pull it all back together.

O The big bang actually never occurred, and the universe must have a different origin.

O The universe goes through infinite cycles of expansion and contraction.

O The universe is not only composed of the objects that we can see.

Answers

Answer:

a

Explanation:

after the universe reach the limit, gravity does its thing

Set the cannon to have an initial speed of 25 m/s at an angle of 30-degrees. Find how long it takes to hit the ground. Will the time it takes to get to the highest point be less than ½ the time, more than ½ the time, or ½ the time?

Question 7 options:

1/2 the time


more than 1/2 the time


less than 1/2 the time

Answers

The time taken by the projectile to reach the highest point would be one half of the total time of the projectile , therefore the correct answer is option D .

What is a projectile motion ?

It is the motion of any object or body when it is ejected off the surface of the earth and follows any curving path while being affected by the gravitational pull of the planet .

As given in the problem Set the cannon to have an initial speed of 25 m / s at an angle of 30 degrees .

Thus, the right response is option D because it would take the projectile half as long to reach the highest position.

To learn more about projectile motion here,

brainly.com/question/11049671

#SPJ1

P and Q are points within a uniform electric field that are separated by a distance of 0.2 m as shown. The potential difference between P and Q is 75 V.How much work is required to move a +150 μC point charge from P to Q?0.023 J140 J0.011 J2800 J75 J

Answers

ANSWER:

0.011 J

STEP-BY-STEP EXPLANATION:

Given:

q = 150 μC

v = 75 V

r = 0.2

We calculate the work as the product between the charge and the potential difference, just like this:

[tex]\begin{gathered} W=q\cdot v \\ W=150\cdot10^{-6}\cdot75 \\ W=0.01125\text{ J} \\ W\cong0.011\text{ J} \end{gathered}[/tex]

The work required is 0.011 J

Question 8 of 10 A scientist adds different amounts of salt to 5 bottles of water. She then measures how long it takes for the water to boil. What is the responding variable in this experiment? A. The brand of salt used B. The time it takes for the water to boil C. The kind of bottles used D. The amount of salt added to the water SUBMIT it's B​

Answers

Answer:

Explanation:

A scientist adds different amounts of salt to 5 bottles of water. She then measures how long it takes for the water to boil. What is the responding variable in this experiment? A. The time it takes for the water to boil B. The amount of salt added to the water C. The kind of bottles used D. The brand of salt used

Circular Motion
The Trajectory of a mass point is a helix:[tex]r(t)=\left[\begin{array}{ccc}rcos(wt)\\rsin(wt)\\ht\end{array}\right]\\[/tex]
a) Compute the velocity v(t)=r(t) and the acceleration a(t).
b) What is the angel between the velocity and the acceleration?
c) If h=0, what is the radial acceleration and the velocity of the mass point at r=2m and 40rpm

No idea how to answer this question, I have never seen anything like it.
Any help would be awesome :)

Answers

Answer and step by step explanation:

First of all, I'm assuming you have had calculus, or this is going to be very awkward. Then, I'm replacing w with the Greek letter omega, it's a pet peeve of mine, sorry.

Shockingly, the derivative of a vector is computed by taking the derivative of each component (by linearity). If you've never heard the word derivative yet, you can think of the x and y components as two harmonic motions out of phase by 90°, and the z component as having constant speed h (harmonic motion is what you see when a mass moves along a circle with constant angular velocity and you look at it from the side).

At this point, let's use the derivative method for question a:

[tex]v(t)=\dot{r}(t)=\left[\begin{array}{ccc}-\omega r\sin(\omega t)\\\omega r\ cos(\omega t)\\h\end{array}\right]; a(t)=\dot v(t)=\ddot{r}(t)=\left[\begin{array}{ccc}-\omega ^2r\cos(\omega t)\\-\omega ^2r\ sin(\omega t)\\0\end{array}\right]\\[/tex]

Point b requires computing angles, which screams dot product to me.

[tex]\vec v(t) \cdot \vec a(t) =\left[\begin{array}{ccc}-\omega r\sin(\omega t)\\\omega r\ cos(\omega t)\\h\end{array}\right]\cdot \left[\begin{array}{ccc}-\omega ^2r\cos(\omega t)\\-\omega ^2r\ sin(\omega t)\\0\end{array}\right] = + \omega^3r^2 sin (\omega t) cos (\omega t) -\omega^3r^2 cos (\omega t) sin (\omega t) = 0 = ||\vec v|| ||\vec a|| cos \theta \implies cos\theta = 0 \implies \theta=\frac \pi2[/tex]

Now, the implied part is granted by the fact that we are assuming neither the velocity nor the acceleration are both zero, so the only option is for the cosine being zero, that makes the two vector orthogonal.

Finally, for point c, let's just take the moduli of both velocity and acceleration [tex]||\vec v|| = \omega r; ||\vec a||=\omega^2 r[/tex] and let's convert the angular velocity in civiliz... err, IS units: [tex]40 rpm = 40\times \frac{2\pi}{60}rad/s = \frac 43 rad/s[/tex]

Let's replace and we get

[tex]v=\frac83= 2.6 m/s\\a= \frac{32}3 = 10.5 m/s^2[/tex]

WHAT IS CHROMATOGRAPHY ?​

Answers

Answer:

Chromatography is a process for separating components of a mixture. To get the process started, the mixture is dissolved in a substance called the mobile phase, which carries it through a second substance called the stationary phase.

Explanation:

hope it will be helpful

Answer:

Chromatography is a process for separating components of a mixture.

Explanation:

To get the process started, the mixture is dissolved in a substance called the mobile phase, which carries it through a second substance called the stationary phase.

Have a good day!

your pet hamster sits on a record player that has constant angular speed . if the hamster moves to a point twice as far from the center, then its linear speed

Answers

Força leonina raios solares

If a piece of ribbon were tied to a stretched string carrying a transverse wave, then how is the ribbon observed to oscillate?a.)perpendicular to wave directionb.)both perpendicular to and parallel to wave direction

Answers

The ribbon was observed to oscillate perpendicular to the wave direction. Option A.

In transverse waves, particles move perpendicular to the direction of wave propagation. Examples of transverse waves are string vibrations and water waves. By moving the Slinky vertically up and down, you can create horizontal transverse waves. Her one type of mechanical wave is the transverse wave.

where the motion of the medium is perpendicular to the direction of energy propagation. A transverse wave is a wave whose vibration is perpendicular to the direction of wave propagation. This is in contrast to longitudinal waves, which propagate in the direction of oscillation. Water waves are an example of transverse waves.

Learn more about The ribbon here:-https://brainly.com/question/11685530

#SPJ9

The table below shows part of the operating budget of a small dairy farm for the last year. The only expense not listed is maintenance. LAST YEARS OPERATING BUDGETExpense Fraction of BudgetFood 1/3Housing 1/3 Medical Care 1/4This year the managers of the farm will change the fraction for the budget for housing to ⅛ but will leave the fraction of the budget for good and medical care the same. Again, the remaining portion of the budget will be before maintenance expenses. What is the difference between the fraction of the budget for maintenance this year and last year?Show your workAnswer

Answers

[tex]\frac{5}{24}[/tex]

Explanation

Step 1

let the fractions

[tex]\begin{gathered} Food\text{ }\frac{\text{1}}{3} \\ \text{ Housing }\frac{\text{1}}{3} \\ \text{Medical care }\frac{1}{4} \\ \text{ maintenance= M ( unknown)} \end{gathered}[/tex]

so

a)This year the managers of the farm will change the fraction for the budget for housing to 1/8

so

[tex]\begin{gathered} Food\text{ }\frac{\text{1}}{3} \\ \text{ Housing }\frac{\text{1}}{8} \\ \text{Medical care }\frac{1}{4} \\ \text{ maintenance= M ( unknown)} \end{gathered}[/tex]

b) hence,the total budget is

[tex]\begin{gathered} \text{past year= Operatingbudget= food+housidn +Medical care+maintenance} \\ \text{replace} \\ past\text{ year= }\frac{1}{3}+\frac{1}{3}+\frac{1}{4}+m \\ past\text{ year=}\frac{11}{12}+m \end{gathered}[/tex]

this year

[tex]\begin{gathered} \text{past year= Operatingbudget= food+housidn +Medical care+maintenance} \\ \text{replace} \\ thisyear\text{= }\frac{1}{3}+\frac{1}{8}+\frac{1}{4}+m \\ thisyear\text{=}\frac{17}{24}+m \end{gathered}[/tex]

Step 2

find the fractions for maintenance on each year:

as we are using fraction of the total budget, we need to set the sum of the fractions equals 1, hence

a) past year

[tex]\begin{gathered} \text{total = 1, so} \\ past\text{ year=}\frac{11}{12}+m=1 \\ m=1-\frac{11}{12} \\ m=\text{ }\frac{1}{12} \end{gathered}[/tex]

b) this year

[tex]\begin{gathered} \text{total = 1, so} \\ this\text{year=}\frac{17}{24}+m=1 \\ m=1-\frac{17}{24} \\ m=\text{ }\frac{7}{24} \end{gathered}[/tex]

Step 3

now, find the difference

[tex]\begin{gathered} \text{difference =}\frac{7}{24}-\frac{1}{12} \\ \text{difference =}\frac{5}{24} \end{gathered}[/tex]

therefore, the answer is 5/24

I hope this helps you

The object represented by line E does not stop. Is this true or false?

Answers

The given graph is about velocity and time, the dependent and independent variable, respectively. As we can observe, line E crosses the zero level to the negative zone, which means the object didn't stop but changed its direction.

Therefore, the statement is true.

When a force is exerted on a box, an equal and opposite force is exertedby the box. These forces are calledforces.O action-reactionO frictionalO centripetalO gravitational

Answers

Explanation

Newton's third law states that when two bodies interact, they apply forces to one another that are equal in magnitude and opposite in direction.

let's check a box on a table

For friction on an incline, what direction does Fp point?

Answers

The force of friction on an inclined plane, will act upward to oppose the downward motion of the object on the inclined plane.

What is force of friction?

The force of friction is the force that opposes the motion of an object.

Since the force of friction opposes the motion of an object, it acts upward along the plane for an object moving along an inclined plane.

As the object moves downwards, the force of friction will act upwards to oppose the downward motion of the object.

Mathematically, the magnitude of force of friction on an object moving along inclined plane is given as;

Ff = μmg

where;

μ is the coefficient of frictionm is the mass of the objectg is acceleration due to gravity

Thus, the force of friction on an inclined plane, will act upward to oppose the downward motion of the object on the inclined plane.

Learn more about force of friction here: https://brainly.com/question/4618599

#SPJ1

The complete question is below:

For friction on an incline, what direction does force of friction (Fp) point?

Other Questions
Foods that are high in _________ have the least impact on slowing the body's absorption rate of alcohol.FiberProteinVitamin CFat robin's history instructor is not very engaging, and no matter how hard she tries to pay attention to his lectures, she is unable to focus. he does not write anything on the whiteboard, and he uses no visual aids. which strategy would best help robin to retain the information presented during her instructor's lectures? b. Contrast What differences existed between the oldimmigrants and the new immigrants? B. Work with a partner. Read the passage aloud. Pay attention toexpression. Stop after one minute. Fill out the chart.First ReadSecond ReadWords Read-Number ofErrors===Words CorrectScore A water bed that is 1.5 m wide and 2.5 m long weighs 1055 N. Assuming the entire lower surface of the bed is in contact with the floor, what is the pressure the bed exerts on the floor?a.250 Pac.270 Pab.260 Pad.280 Pa Select the type of inheritance pattern that is best described below:The sickle-cell allele, s, is responsible for a variety of phenotypic effects, from pain and fever to damage to the heart, lungs, joints, brain, or kidneys.a. Codominanceb. Multiple Allelesc. Pleiotropyd. Incomplete Dominancee. Polygenic Inheritance the cost of 4 Big macs plus $1.07 for fries is $15.07. Write an equation using the variable m to represent the cost of a Big Mac. then solve for your equation Explain why the products (x - 3)^2 and (x + 3)(x - 3)have a different number of terms. The giant sequoia is the tallest tree in the world, and it can grow to be 80 m(8,000 cm) in height. If a model used a ratio of 1:800, how tall would themodel of the sequoia tree be?A. 10 cmOB. 800 cmC. 80 cmD. 0.01 cm A woman bought some large frames for $10 each and some small frames for $5 each at a closeout sale. If she bought 23 frames for $160, find how many of each type she bought What is the definition of human rights? Complete the two-way frequency table below, which shows the relationship between students who enroll in advanced algebra and physics in a particular high school. From a sample of 40 students, it is found that 29 are taking algebra, 14 are taking physics, and 5 are enrolled in both. How many students are enrolled in either algebra or physics?Awnsers: 33 38 2 5 Mr. barber used 5/6 yard of wire to put up a ceiling fan. he used 1/2 yard of wire to fix a switch pt 1 out of 2 complete the calculations below to write equivalent fraction with the least common denominator Which characteristic will be affected by increasing the speed of an object from 30 mph to 40 mph? gravitational attraction weight kinetic energymass Find the equation of the line:a) with a gradient of and a y-intercept of -2b) with a gradient of 3 and passing through the point (-2:2)c) passing through the points (1; -2) and (-2; 1)d) parallel to the y-axis cutting the x-axis at -1 |5-2x|+110 absolute value equations or inequalities and graph the solution set on the number line What is the domain of f(x)= log7x-4 How do we meet the needs of humanity in a sustainable way The citizens of a certain community were ask to choose their favorite pet. The pie chart below shows the distribution of the citizens answers. If there are 140.000 citizens in the community, how many chose Cats, Fish, or Dogs Match the examples to the stages of the buying and decision-making process.