A solid cylinder (mass 0.274 kg, radius 2.00 cm) rolls without slipping at a speed of 5.00 cm/s. What is its total kinetic energy?

Answer:

III only

Explanation:

The net vertical force is equal to 0 because the block is not moving up. Then, we can write the following equation

Fnet = N + Fsinθ - mg = 0

Where Fsinθ is the vertical component of the force F. Solving for the normal force N, we get:

N = mg - Fsinθ

Therefore, the normal force is not equal to the weight and the normal force is not mgcos(θ)

However, the horizontal component of F is Fcos(θ). So, the answer is

III only.

Linear velocity (V) = r* w

where:

r = radius = diameter/2= 0.35 /2 = 0.175 m

w= angular velocity = rpm = 2500 = 2500/60 = 125/3 rps

1 revolution = 360° = 2pi rad/s = 125/3 2pi rad/s

= 261.8 rad/s

v = 0.175 m * 261.8 m/s = 45.8 m/s

We know that the components of any vector along the x and y axes are given by:

In this case we know the tha magnitude of the vector is 6.96 m/s; we also know that the angle from the x-axis to the vector is 51.5° (the sum of angles θ and the 26.5° angle); then we have:

Therefore, the components of the vector are:

A. Magnetic moment will be 17.212*[tex]10^{-4} A-m^{2}[/tex].

B. Torque will be 6.024* [tex]10^{-4} N-m[/tex]

C. 9f B = 35 make angle 60°

then T = 25 × 15,×10³× (5.40x8.50) ×10 × 0.35 Sm 60°

5.22x[tex]10^{-4}[/tex]  n-m

of ∅ = 0° t = 0 ∵ sm0 = 0

As it is a Torque NIAB

= Am². Tesla

= N-3.

Rectangular coils have four sides and slightly rounded edges and are generally cheaper to manufacture. Importantly they cannot handle radial forces more effectively than their circular counterparts and most lose their rectangular shape during short circuits. A rectangular coil carrying current is placed in a uniform magnetic field. The direction in which the spool is difficult to rotate.

The motor works on the principle that when a rectangular coil is placed in a magnetic field and an electric current is applied, a force acts on the coil, causing it to rotate continuously. A toroidal transformer is a type of electrical transformer that consists of a toroidal or annular core. Its primary and secondary windings are wound across the surface of the torus core and separated by insulating material. This configuration minimizes flux leakage.

Learn more about Rectangular coils here:-

https://brainly.com/question/15585226

#SPJ1

Given:

The lamp draws the current is

The voltage supplied by the generator is

The time for which energy converted is

Explanation:

(a)

The power delivered by the generator is given by

Plugging all the values in the above equation, we get

The power delivered by the generator is

(b)

Energy is converted by the electric lamp is given by

Plugging all the values in the above relation, we get

Thus, the electric energy convert by the lamp is

Given:

h = height = 20 ft = 6.096 m

m = 150 pound = 68.0389 kg

time = 15 s

g= 9.8 m/s^2

Potential energy = mgh = (68.0389 ) (9.8 ) (6.096 ) = 4,064.7 J

Work done = 4,064.7 J

Answer:

Vx = 150 * cos 53 = 90.3 m/s     horizontal speed

Vy = 150 * sin 53 = 120 m/s      vertical speed

t1 = 120 / 9.8 = 12.2 sec       time to reach vertical height  (vy = 0 at apex)

H1 = 1/2 g t^2 = 9.8 / 2 * 12.2^2 = 729 m    height risen above cliff

729 + 405 = 1134 m      total height above striking point

H = 1/2 g T^2          where T is time to fall 1134 m

T = (2 * 1134 / 9.8)^1/2 = 15.2 sec

T + t1 = 15.2  + 12.2 = 27.4 sec total time in air

Sx = Vx * 27.4 = 90.3 * 27.4 = 2470 m   total horizontal distance

Set of equation which is true for the situation is

c) 2SA = SB  and 2BA=BB

Force applied perpendicular to the surface of an object per unit area is called pressure

SI unit of pressure is one newton per square meter (N/m2).

Given, length = 3 foot, width= 1 foot and height = 1 foot

1foot = 0.305m

Volume of tank A = 3*0.305*0.305*0.305

= 0.085

density of water= 1000kg/m^3

Pressure= 1000kg/m^3 *gravity * height

=1000kg/m^3 * 9.8 m/s^2* 0.305

=2989 N

Force exerted by water at bottom= P * A

                                                        = 2989*0.085

                                                         =254.065 Nm^2

similarly, for tank B

Given ,length = 6 foot, width =1 foot and height= 1foot

Volume of tank B = 6*0.305*0.305*0.305

                               =0.17

pressure= 1000kg/m^3 * 9.8m/s^2 * 0.305

               = 2989 N

Force exerted by water at bottom = P*A

                                                         = 2989 * 0.17

                                                          =508.13 Nm^2

Hence proved that pressure exerted by tank B is twice that of tank A.

And same goes for pressure exerted on the side of the tank.

To know more about pressure, refer

https://brainly.com/question/26101731

#SPJ13

Answer:

1.22 m/s² (3 s.f.)

Explanation:

Draw a diagram modelling the given situation (see attachment).

Given values:

As the pulling force is at an angle to the plane (ground), resolve the force into components parallel and perpendicular to the plane.

Resolving vertically (↑) to find the Normal Reaction, R:

[tex]\begin{aligned}\implies R+82.2 \sin 64^{\circ}&=14g\\R&=14g-82.2 \sin 64^{\circ}\end{aligned}[/tex]

The frictional force takes its maximum value when an object starts to move (or is on the point of moving):

[tex]\boxed{F_{\text{max}}= \mu R}[/tex]

where R is the Normal Reaction and μ is the coefficient of friction.

Using F = μR to find the Frictional Force, F:

[tex]\begin{aligned}\implies F &= 0.3\left(14g-82.2 \sin 64^{\circ}\right)\\ & =0.3\left(14(9.8)-82.2 \sin 64^{\circ}\right)\\& =0.3\left(137.2-82.2 \sin 64^{\circ}\right)\\ & = 41.16-24.66\sin 64^{\circ}\end{aligned}[/tex]

Newton's second law states that the overall resultant force acting on a body is equal to the mass of the body multiplied by the body’s acceleration:

[tex]\boxed{F_{\text{net}}=ma}[/tex]

Resolving horizontally (→) using Newton's second law of motion to find acceleration:

[tex]\begin{aligned}\textsf{Using} \quad F_{\text{net}}&=ma\\\\\implies 82.2 \cos64^{\circ}-(41.16-24.66\sin 64^{\circ})&=14a\\17.0383694...&=14a\\a&=\dfrac{17.0383694...}{14}\\a&=1.21702638...\\a&=1.22\;\sf m/s^2\;(3\;s.f.)\end{aligned}[/tex]

Therefore, the acceleration of the box is 1.22 m/s² (3 s.f.).

The cargo while it was accelerating at a distance of  0.602 meters.

Acceleration is the name we give to any system wherein the speed changes. on the grounds that speed is a pace and a direction, there are only two approaches so that you can boost up.

Velocity is the rate of change of displacement. Acceleration is the price of alternate velocity. velocity is a vector quantity because it consists of both significance and direction. Acceleration is likewise a vector quantity as it's far simply the charge of alternate velocity.

initial velocity = 55 m/hr

                   = 55/60× 60 m/sec

                    = 0.0152 m/sec

final velocity = 16 mi/hr

                      = 16/3600

                     = 0.0044 m/sec

time = 3.2 sec

V = u -  at

a = ( U - V )/t

  =  (0.0152 - 0.0044)/t

  = 0.0108 m/sec²

S = ut + 1/2at²

   =  0.0152 × 3.2 sec + 1/2 × 0.0108 m/sec² ×  (3.2)²

   = 0.0486 + 0.553

   = 0.602 meter.

Learn more about acceleration here:-https://brainly.com/question/460763

#SPJ1

W0e are asked to determine the frequency of a sound given its velocity and wavelength. To do that we will use the following formula:

Where:

Now, we solve for the frequency by dividing both sides by the wavelength.

Now, we substitute the values:

Solving the operations:

Therefore, the frequency is 40 Hz.

If an electron travels 2.68 m in 6.11 × 10^-8 s, it will travel at a speed of 43.86 * [tex]10^{8}[/tex] cm / s

v = d / t

v = Velocity

d = Distance

t = Time

d = 2.68 m

t = 6.11 * [tex]10^{-8}[/tex]

v = 2.68 / 6.11 * [tex]10^{-8}[/tex]

v = 0.4386 * [tex]10^{8}[/tex] m / s

v = 0.4386 * [tex]10^{8}[/tex] * 10² cm / s

v = 43.86 * [tex]10^{8}[/tex] cm / s

One meter is equal to 100 centimeters. So in order to convert a meter value into centimeter, multiply the meter value by 100 or 10².

Therefore, the electron travels at 43.86 * [tex]10^{8}[/tex] cm / s

To know more about velocity

https://brainly.com/question/19979064

#SPJ1

The processes that help Divya and Melissa identify the spicy taste of the chicken sandwiches with sriracha sauce is sensation.

Sensation is the process in which one feels something after being in physical contact with something. As Divya and Melissa eats the chicken sandwiches with sriracha sauce, their senses tells that the food is spicy.

Acculturation is the process in which one adopts and adjusts to a new cultural environment. Homogenization is the process in which two non-soluble liquids are mixed uniformly. Adaptation is the process of changing one's trait to a new environment.

Therefore,  the processes that helps them identify the spicy taste is sensation.

To know more about sensation

https://brainly.com/question/14126075

#SPJ1

Given

Initial speed, u=45 m/s

Acceleration

Time taken, t=4 sec

To find

The final speed

Explanation

Let the speed he be going in be v

Thus,

Conclusion

The velocity he is going in is 13 m/s.

The magnification of first lens can be given as,

Here, m1 is the magnification of first lens, v1 is the distance of image from first lens and u1 is the distance of object from first lens.

Substitute the known values in the equation,

The magnification of second lens can be given as,

Here, m2 is the magnification of second lens, v2 is the distance of image from second lens and u2 is the distance of object from second lens.

Substitute the known values in the equation,

The combined magnification of two lenses can be given as,

Substitute the known values,

Thus, the combined magnification of two lenses is 1.5.

Increasing his acceleration will impact his velocity and rate of displacement covered in that as the speed increases due to the increased rate of acceleration, the rate of air resistance also increases.  

Air resistance is a force created by air. When an item moves through the air, the force operates in the opposite direction.

When a diver descends, the force of air resistance acts to counteract the force of gravity. As the skydiver falls faster and faster, the quantity of air resistance grows until it equals the magnitude of gravity's force.

A balance of forces is achieved when the force of gravity equals the force of air resistance, and the skydiver no longer accelerates. The skydiver reaches what is known as terminal velocity.

Learn more about air resistance:

https://brainly.com/question/16859536
#SPJ1

Answer:

v = u + at

Explanation:

initial velocity = u = 0

acceleration of the car = a = 7.8 m/s^2

time taken to reach a speed of, v = 6 m/s

hence,

6 = 0 + 7.8 x t

t = 6/7.8

t = 0.77 s

The x-component of the vector is determined as -16.24 m.

The x-component of a vector is the vector component measured along x - direction. It is the vector acting in the x-coordinate.

The magnitude of x -component of a vector is given by the following formula as shown below;

Vₓ = V cosθ

where;

Vₓ = 148 m x cos(-96.3)

Vₓ = -16.24 m

Learn more about x - component of a vector here: https://brainly.com/question/28002904

#SPJ1

Answer:

Y= -147

X= -16.24

Explanation:

The correct answer is option C, 0.50 N to the left.

Given,

The charges,

q₁=5×10⁻⁶ C

q₂=4.0×10⁻⁶ C

q₃=10.0×10⁻⁶ C

The distance between the 1st charge and the second charge, r₁=20 cm=0.20 m

The distance between 2nd charge and the 3 rd charge, r₂=30 cm=0.30 m

As all the charges have the same sign, the nature of the force is repulsive. Thus the force applied by the q₂ is directed to the left. And the force applied by the charge q₃ is pointed to the right.

From Coulomb's law, the net electrostatic force on q₂ is given by,

On substituting the knwon values,

Thus the magnitude of the net electrostatic force on the charge q₂ is 0.5 N

As the force to the left is greater than the force to the right, the net force will be directed to the left.

Therefore the correct answer is option A, 0.50 N to the left.

Answer:

ΔS = 3.5 m

Explanation:

First, apply the 2º Newton's Law to find the resulting acceleration.

∑F = m × a

F = m × a

14 = 32 × a

a = 14 /32 = 7/16

a = 0.4375 m/s²

Then, we must apply the equation of accelerated movement:

ΔS = V₀*t + (1/2)*a*t²

Starting from the rest and using the value of acceleration:

ΔS = 0*4 + (1/2)*(0.4375)*(4)²

ΔS = (1/2)*(0.4375)*(16)

ΔS = 3.5 m

The age of the Universe is  13.8 ± 0.1 billion years.

The ‘hubble constant, h0’ is used to determine the size of the universe. It is a  measurement that is used in describing the universe's expansion. It was a constant introduced by Edwin Hubble. He found out that the farther the distance of the galaxies from the Earth, the faster they would appear to be moving.

One of the most important numbers in cosmology Hubble's constant because it is needed to estimate the size and age of the universe which is  13.8 ± 0.1 billion years.

The age of the universe using Hubble's constant which is  13.8 ± 0.1 billion years.

To learn more about Hubble's constant refer to the link:

brainly.com/question/4445423

#SPJ1

The area of the small piston, a, is 0.1963 sq in. and the area of the large piston, A, is 6.28 sq in.​ The force applied to the small piston (f)= 31.21 lb that is required to deliver a working force (F)= 1000 lb

Force is a physical quantity that means if some kind of external or internal affair is happen on a object and the object is move a bit that means a force is act on it. Its a vector quantity.

To calculate the force of the small piston f we are using the formula,

p=P

Or, f/a=F/A

Here we are given,

a= The area of the small piston = 0.1963 sq in

A= The area of the big piston = 6.28 sq in.

F= The force of the big piston = 1000 lb.

We have to calculate the force of the small piston = f

Now we put the values in above equation we get,

f / a = F / A

Or, f = a F/A

Or, f = [tex]\frac{0.1963 \times 1000}{6.28}[/tex]

Or, f = 31.21 lb

Now from the calculation we can say that, The force applied to the small piston (f)= 31.21 lb

Learn more about force:

https://brainly.com/question/25239010

#SPJ10

The equation which represent the velocity, if the satellite is moved to an orbital radius of 5r is V = V/[tex]\sqrt\\5[/tex].

Orbital velocity or orbital speed is the minimum velocity a body must maintain to stay in an orbit. Due to the inertia of a moving body, the body has the tendency to move on in a straight path.

It is given that the radius is 5r

To find out the equation which represent the velocity if the satellite is moved to an orbital radius of 5r.

Mathematically, the orbital velocity is calculated by the formula:

V = [tex]\sqrt{GM}[/tex]/r

where, V = orbital velocity,

G = gravitational constant

M = mass of a satellite

r = radius

Substituting the value of r in this equation, we have:

V = [tex]\sqrt{GM}[/tex]/r

V = 1/ [tex]\sqrt{5}[/tex] ×  [tex]\sqrt{GM}[/tex]/r

V = [tex]\sqrt{GM}[/tex]/r

Therefore,

V = 1/ [tex]\sqrt{5}[/tex]  × V

V = V/[tex]\sqrt{5}[/tex]

Learn more about Orbital velocity here:

https://brainly.com/question/15886625

#SPJ1

The time taken for the javelin thrown at 28.5 m/s from flat ground at a 43.2 degree angle to reach the maximum height is 2.0 s

From projectile motion, we understand that the time taken to reach maximum height is given as:

t = uSineθ / g

Where

Now, using the above formua, we can obtain the time taken for the javelin to reach the maximum height as follow:

Initial velocity (u) = 28.5 m/s

Angle of projection (θ) = 43.2 degrees

Acceleration due to gravity (g) = 9.8 m/s²

Time taken to reach the peak (t) = ?

t = uSineθ / g

t = (28.5 × Sine 43.2) / 9.8

t = 2.0 s

Thus, the time taken to reach maximum height is 2.0 s

Learn more about time:

https://brainly.com/question/17209215

#SPJ1

No count number what time of the 12 months it's far, the northern and the southern hemisphere will usually revel in a season contrary to the other.

Therefore, if the northern hemisphere has the summer time, then the southern hemisphere will revel in the wintry weather season. When we are saying contrary we additionally suggest that once it's far spring season in  the northern hemisphere, then it's far autumn season in the southern hemisphere.

The most important motive for this phenomenon is the lean of the earth on its axis. Since the earth is tilted slightly, one of the hemispheres will usually get hold of greater and direct rays from the solar. It approach that once the earth is tilted in the direction of the solar, then the northern hemisphere gets direct solar rays that are skilled through us because the summer time.

During this time the southern hemisphere stories the wintry weather season. This phenomenon maintains alternating because the planet revolves across the sun. This summer time lasts for 1/2 of a 12 months, or instead 1/2 of a revolution.

Learn more about seasons here https://brainly.com/question/15734021

#SPJ1

When an electron moves between the ends of a 9.00-volt battery, the work done on the electron is 1.44 * 10⁻¹⁸ Jouoles; option C

The work done in moving an electron between two points is defined as the product of the potential difference between the points and the charge on an electron.

Mathematically;

where;

ΔV is the potential difference between the points

q is the charge on the electron.

The potential difference between the two points is the work done in moving a unit positive charge from one point to the other in the circuit.

The charge, q on an electron is 1.609 * 10⁻¹⁹ Coulombs.

For the given electron that moves between the ends of a 9.00-volt battery;

ΔV = 9.000 Volts

q =  1.609 * 10⁻¹⁹ Coulombs

Work done = 9.000 * 1.609 * 10⁻¹⁹

Work done = 1.44 * 10⁻¹⁸ Jouoles

Learn more about work done on electrons at: https://brainly.com/question/20410981

#SPJ1

Just because there is a relationship between two behaviors does not mean that one causes the other. Option A.

Natural observation is a research method that observes objects in their natural environment. This approach is commonly used by psychologists and other social scientists. It is a process of deep reflection, questioning, and evidence evaluation. A study in which researchers look for relationships between people's demographic neighborhood and their level of prejudice.

Psychologists use this because it is the most objective method known to produce reliable insights. The science of behavior and mental processes. It attempts to describe and explain aspects of human thinking feeling perception and behavior. Naturalistic observation is a method of observation that involves observing people's behavior in environments in which they normally occur. Laboratory Observation observing behavior in a more artificial environment focusing on a small number of carefully defined behaviors.

Learn more about Correlated behaviors here:-https://brainly.com/question/15295264
#SPJ1

We will have that the value will be: