We have that the appropriate statement will be
An algorithm that accesses only the first 10 elements in the list, regardless of the size of the list. Which of the algorithms run in reasonable time
Generally The algorithm must traverse the listing twice in order to gain access to everything in the list twice. This results in the operations entry 2*n.
Additionally, if a given component is used n times, the list will need to be traversed n times, resulting in n2 access operations.
Each 2*n and n2 is significantly larger if n is a really large integer. Thus, this algorithm will only require ten entry-level operations and run quickly.
An algorithm is a process used to carry out a computation or solve a problem. In either hardware-based or software-based routines, algorithms function as a detailed sequence of instructions that carry out predetermined operations sequentially.
Learn more about algorithm:
https://brainly.com/question/24953880
#SPJ4
Which tab would you click to find the document protection features?
C
File
Home
References
Insert
Read Question
File
Explanation:You can also go to the Review tab, in the Protect group, click Protect Document, and then click Restrict Formatting and Editing.
an organization is planning to deploy an e-commerce site hosted on a web farm. it administrators have identified a list of security controls they say will provide the best protection for this project. management is now reviewing the list and removing any security controls that do not align with the organization's mission. what is this called?
It is called security management. All facets of risk management for an organization's assets, including computers, people, buildings, and other assets, are covered by security management.
All facets of risk management for an organization's assets, including computers, people, buildings, and other assets, are covered by security management. In order to protect these assets, policies and procedures must be created, put into effect, and maintained over time. This is the first step in a security management plan.
In the sections below, we go through the definition of security management for enterprises, different forms of security management, and security management factors to take into account when selecting a cyber security solution.
In order to protect these assets, policies and procedures must be created, put into effect, and maintained over time.
An organization's cybersecurity strategy should have a solid foundation thanks to security management practices. Data classification, risk management, and threat detection and response will all make use of the information and procedures that were built as part of the security management processes.
To know more about security management click on the link:
https://brainly.com/question/14951854
#SPJ4
Which generation of sata storage devices supports up to 6-gbps data transfer rates and addresses solid-state drives?.
SATA3 of sata storage devices supports up to 6-gbps data transfer rates and addresses solid-state drives.
What is storage device?
A storage device is a component of computer hardware that stores information/data in order to process the results of any computational task. A computer cannot run or even boot up without a storage device. In other terms, a storage device is hardware that is used for storing, transferring, or extracting data files.
SATA3 is capable of speeds of up to 6 Gbps (600 MBps). It mostly addresses SATA solid-state SSDs (hard disc drives are not capable of sending data at this rate).
To learn more about storage device
https://brainly.com/question/28346495
#SPJ4
you are in the process of configuring an iscsi storage area network (san) for your network. you want to configure a windows server system to connect to an iscsi target defined on a different server system. you also need to define iscsi security settings, including chap and ipsec. which tool should you use?
iSCSI initiator is the tool
What is iSCSI initiator ?
In computer data storage, a SCSI initiator is the endpoint that initiates a SCSI session, that is, sends a SCSI command. The initiator usually does not provide any Logical Unit Numbers. A host computer can transport data to an external iSCSI-based storage array using an Ethernet network adapter across an IP network by using an Internet Small Computer System Interface (iSCSI) initiator, which can be either software or hardware. For data transmission to the storage device, also referred to as an iSCSI target, the iSCSI initiator creates the input/output (I/O) command sequence.
Hardware-based iSCSI initiators are much less frequent than software-based ones. The Small Computer System Interface (SCSI) I/O command set is mapped to TCP/IP for usage by the iSCSI storage system by a software iSCSI initiator, which is often a component of the server operating system. A dedicated host-based network interface card (NIC) with resources built-in to handle the iSCSI and TCP/IP processing tasks is referred to as a hardware iSCSI initiator. Because servers now have more potent computing cores, they no longer require a NIC-based TCP/IP offload engine (TOE). When a server is booted from a local disc, a hardware iSCSI initiator may still be beneficial for data protection or security if the card includes built-in encryption capabilities.
To learn more about iSCSI initiator refer :
https://brainly.com/question/25582008
#SPJ4
The tool that will be utilized is the iSCSI Initiator, which is based on the scenario that was explained previously. Remember that it normally serves as the iSCSI client.
What is storage area network?A computer network that enables access to consolidated, block-level data storage is known as a storage area network (SAN) or storage network. SANs are mostly used to connect servers to data storage devices like disk arrays and tape libraries so that the operating system sees them as direct-attached storage. An independent, dedicated high-speed network called a storage area network (SAN) links and distributes shared pools of storage devices to numerous servers. Each server has access to shared storage just like a drive that is physically connected to the server.The tool that will be utilized is the iSCSI Initiator, which is based on the scenario that was explained previously. Remember that it normally serves as the iSCSI client.The network's iSCSI storage area network (SAN) can be set up using the Internet Small Computer System Interface (iSCSI) initiator. Commands may be transmitted over an IP network by use of the iSCSI Initiator. The iSCSI Initiator can be used to establish a connection to a specific iSCSI target.To learn more about storage area network refer to:
https://brainly.com/question/13152840
#SPJ4
upon conducting a visual inspection of the server room, you see that a switch displays led collision lights that are continually lit. you check the led on the corresponding workstation and see that it is flashing rapidly even though it is not sending or receiving network traffic at that time.
A router connects different networks and routes traffic between them. The network number or network address is a distinctive identifier used to identify each network connected by a router.
The physical topology for LANs that is most commonly used is star topology. ARCNET introduced the star, and Ethernet later adopted it. An Ethernet crossover cable is a type of twisted pair Ethernet cable used to connect computing devices that would typically be connected via a network switch, Ethernet hub, or router, such as directly connecting two personal computers via their network adapters. Each node is connected directly to a central device such as a hub or a switch.
Learn more about Ethernet here-
https://brainly.com/question/13441312
#SPJ4
if the beq $6, $7, exit instruction is fetched from memory address 0x40000008, what address will the pc register contain when this branch instruction is in the decode stage?
Branch conditions are discovered during the pipeline's decode phase. The target address in a branch instruction is unknown until the instruction's execute phase.
The CPU can detect what instruction needs to be executed through the decoding process, which also enables it to determine how many operands it needs to fetch in order to execute the instruction. For the subsequent steps, the memory-fetched opcode is decoded and relocated to the relevant registers. Decode stage logic causes the multiplexers to choose the most recent data by comparing the registers written by instructions in the execute and access stages of the pipeline to the registers read by the instruction in the decode stage.
Learn more about decode here-
https://brainly.com/question/20493746
#SPJ4
a(n) document contains the text for a web page interspersed with coding for how to display text and any additional visual or auditory elements.
A source document contains the text for a web page interperse with coding for how to display text and other additional visual or auditory elements. Hence, the correct fill-in-the-blank option to this question is "Source".
The source document contains the text for a web page and also has coding for displaying that text and other visual or auditory elements of a web page in the web browser. The source document of a web page contains the coding text mostly in HTML form that is interpreted by a web browser. And, the web browser displays what has been written in that source document to the client. Source documents not only contain HTML code but also contain other scripting language code such as PHP, Javascript, Bootstrap etc.
The correction question is given below:
"a(n) _____________ document contains the text for a web page interspersed with coding for how to display text and any additional visual or auditory elements."
You can learn more about source document at
https://brainly.com/question/4593389
#SPJ4
consider a point-to-point link 4 km in length. at what bandwidth would propagation delay (at a speed of 2 × 108 m/ s) equal transmit delay for 512-byte packets?
The bandwidth at which the propagation delay would equal transmit delay for 512-byte packets is equal to 204800 Kbps.
As the value for the speed of transmission is given in meters/second, we first convert the length of the point-to-point link into meters;
length of the point-to-point link = 4km = 4 × 1000 = 4000m
The given speed of transmission is 2 × 10^8 m/s, so the propagation delay could be calculated as follows;
propagation delay = length of the point-to-point link ÷ speed of transmission
propagation delay = 4000 / 2×10^8
propagation delay = 0.00002
As 512 bytes = ( 512 × 8 )bits = 4096 bits
Transmission delay = 4096 bits / (x) bits/sec
If propagation delay is equal to transmission delay;
4096 / (x) bits/sec = 0.00002
4096 = (x) bits/sec (0.00002)
x = 4096 / 0.00002
x = 204800000 bits / sec
As;
1000 bits / sec = 1 Kbps
204800000 bits / sec = 204800 Kbps
Hence, the bandwidth at which the propagation delay would equal transmit delay for 512-byte packets is calculated to be 204800 Kbps.
To learn more about bandwidth, click here:
https://brainly.com/question/8154174
#SPJ4
assume we have a memory that is 2^16 bytes and a cache configuration that consists of 4 sets, 16 lines per set, and 1024 bytes per line. if our program accesses a local integer variable stored on the stack whose value is at memory location 0x4ac3, what is the decimal value of the tag?
Using a 16-way set associative mapping byte with a line per set of 16. size of memory = 216.
A byte is a unit of data that is eight binary digits long in the majority of computer systems. Most computers store characters like letters, numbers, and typographic symbols in units called bytes. Each byte has the capacity to store a string of bits that must be combined into a single larger unit for application needs. For a program that displays images, for instance, a stream of bits can represent a visual image. A group of bits that make up a computer program's machine code serves as another illustration.
In some computer systems, a word is made up of four bytes. A computer processor can be built to efficiently handle this unit as it reads and processes each instruction.
To know more about byte click on the link:
https://brainly.com/question/15166519
#SPJ4
Which component is responsible for reformatting print jobs so that the printer can understand and process them?.
Print driver is responsible for reformatting print jobs so that the printer can understand and process them.
What is printer?
A printer is a computer accessory that makes a permanent reproduction of graphics or text, generally on paper. While most output is human-readable, bar code printers are an example of a printer's expanded application. Printers are classified into three types: 3D printers, inkjet printers, laser printers, and thermal printers. In the nineteenth century, Charles Babbage created a mechanically driven apparatus for his difference engine; nevertheless, his mechanical printer concept was not realised until 2000.
A printer driver, also known as a print processor, is software that on a computer translates the data to be printed into a format that a printer can understand. Printer drivers enable apps to print without having to understand the technical intricacies of each printer model.
To learn more about printer
https://brainly.com/question/145385
#SPJ4
you are the supervisor of a twenty-member team. your goal is to increase collaboration with the use of technology. to accomplish this goal, you would most likely use which type of program to create and edit content?
The leader of a group of twenty people. Creating new or better products, service, or procedures.
What distinguishes a programme from a programme?The correct spelling of "programme" in American English. The much more typical spelling for the word "programme" in Australian & Canadian English. Although programme was frequently used in computing contexts, programme is the correct term for British English.
How do you define "programme"?A computer executes a collection of instructions program is a sequence to carry out a certain task. [Computing] The larger a computer algorithm is, the more likely it is to make errors.
To know more about Program visit:
https://brainly.com/question/11023419
#SPJ4
Answer the following question please! (Explanation will be greatly appreciated)!!
The c program that stores the values -2, 3 and 5 in the variables a, b and c and displays the possible roots on separate lines is constructed throughout the answer.
What is the c program that models the given situation?The first step to the problem is storing the values -2, 3 and 5 in the variables a, b and c, done as follows:
int main(){
int a = -2;
int b = 3;
int c = 5;
Then we declare the roots, which could be decimal, as double.
double root1;
double root2;
Then we calculate the roots, as follows: (due to the sqrt function, library math.h has to be included, with command #include <math.h> before the main).
root1 = (-b - sqrt(b*b - 4*a*c))/(2*a);
root2 = (-b + sqrt(b*b - 4*a*c))/(2*a);
Then the values are printed as follows:
printf("Root 1: %lf\n", root1);
printf("Root 2: %lf", root2);
The \n command guarantees that they are printed on different lines.
At the end, we close the main, as follows:
return 1;
}
More can be learned about c programming at https://brainly.com/question/15683939
#SPJ1
x = 100
if x > 0:
x -= 1
print(x)
Answer:
Explanation:
Program and Reault:
1) has cwnd set to 8,000 bytes 2) has 4,000 bytes available in its own input buffers 3) receives a segment with an advertised window of 12,000 bytes. the tcp sender will set its offered window wnd to bytes.
The internet's fundamental building blocks, Transmission Control Protocol (TCP) and User Datagram Protocol (UDP), allow various forms of data to be transmitted from a network source to a destination.
While UDP places a higher priority on speed and efficiency, TCP is more reliable. One or more TCP packets can be created and sent to a target using the TCP mode of the Packet Generator tool. The TCP header's header flags and other fields are completely under our control. A file or text payload can be included in the packet as an additional payload. The usage of TCP allows for the secure exchange of data between the server and client. Regardless of the volume, it ensures the integrity of data delivered over the network.
Learn more about packet here-
https://brainly.com/question/13901314
#SPJ4
7.25x4.5 show work please
The above is a multiplication problem. The answer to the multiplication problem above is; 32.625 or 325/8. See the explanation below.
What is multiplication?A product in mathematics is the outcome of multiplication or an expression that identifies the things to be multiplied, known as factors. For instance, 60 is the sum of 6 and 10.
In mathematics, multiplication is defined as continually adding a number with regard to another integer. For example, multiplying 2 by 3 means that 3 is added to itself twice, resulting in 4 + 3 = 7. This is an easy method for children to multiply numbers.
Hence the solution to the above is;
Given:
7.25 x 4.5
Convert to fractions
29/4 * 9/2
4 cancels our each other
= (29 x 9) / (4 x2)
= 261/8
= 32 5/8
or 32.625
Learn more about multiplication:
https://brainly.com/question/10873737
#SPJ1
A post made to your favorite social media application 5 years ago can add information to your digital footprint.
Answer:
True
Explanation:
Anything you search, or post, etc, is added to your digital footprint.
a video conferencing application isn't working due to a domain name system (dns) port error. which record requires modification to fix the issue? multiple choice, shuffle
A record which requires modification to fix the issue is: d) Service Record (SRV).
What is a DNS server?A DNS server can be defined as a type of server that is designed and developed to translate domain names into IP addresses, so as to allow end users access websites and other internet resources through a web browser.
This ultimately implies that, a DNS server refers to a type of server that is typically used in computer networking to translate requests for domain names into IP addresses, by pointing a domain name to a web server.
What is SRV?SRV is an abbreviation for Service Record and it can be defined as a series of data records which is designed and developed to stipulate specifications of the DNS server (DNS) of well-defined (cataloged) services servers such as the following:
Port numbersServersInternet protocol (IP) addresses.Host namePriority and weight.Read more on a Service Record here: https://brainly.com/question/17233082
#SPJ1
Complete Question:
A video conferencing application isn't working due to a Domain Name System (DNS) port error. Which record requires modification to fix the issue?
a) Host(A)
b) Text(TXT)
c) Canonical Name(CNAME)
d) Service Record(SRV)
you are troubleshooting a computer that your client said turns off during normal operation. while you are trying to identify the problem, the client also informs you that if he waits a while, the computer will turn back on and run normally for a bit. you open the system and immediately notice a large dust buildup around the processor fan and heat sink. what problem can you detect on the computer and confidently report to your client?
System is Overheating is the problem that can we detect on the computer and confidently report to our client.
System is Overheating may result from any unintentional circuit defect (such as a short circuit or spark gap), as well as from improper design or manufacturing (such as the lack of a proper heat dissipation system). The system finds an equilibrium between heat accumulation and heat loss as a result of heat accumulation.
Even a brand-new computer will heat up when memory-intensive operations overwhelm the processor. PCs often run hotter as they get older. When the PC's internal cooling system is unable to adequately ventilate the hot air produced by the electrical components utilized in computer processing, system is overheating results.
Device is a short circuit or spark gap are examples of unintended circuit defects that can cause overheating. Other causes include poor design or manufacturing (such as the lack of a proper heat dissipation system). The system achieves balance between heat loss as a result of heat accumulation and heat gain.
To know more about overheating click on the link:
https://brainly.com/question/28465212
#SPJ4
the reason for not allowing users to install new hardware or software without the knowledge of security administrators is:
The risk is that they unintentionally install a backdoor into the network in addition to the hardware or software.
A computer security concept known as the principle of least privilege (POLP) restricts users' access permissions to only those that are absolutely necessary for them to do their duties. Users are only allowed to read, write, or execute the files or resources they need in order to complete their tasks. Installing a software firewall on your computer might help shield it from unapproved data incoming and exiting. A software firewall will only shield the computer it is installed on. Many antivirus scanners also come with a software firewall.
Learn more about software here-
https://brainly.com/question/985406
#SPJ4
Which option provides an easy ability to label documents that can then be used as the basis for a document search?
author
title
tags
comments
An option which provides an easy ability to label documents that can then be used as the basis for a document search is: B. title.
What is a document?A document simply refers to a computer resource that is designed and developed to enable end users to easily store data as a single unit on a computer storage device.
Generally speaking, all computer documents can be identified by a title, date modified, size, and type such as the following;
AudioImageVideoSystemTextWhat is a title?A title can be defined as a feature that avail an end user the ability to easily label a document, as well as serving as the basis for searching for a document on a computer.
Read more on document here: brainly.com/question/24849072
#SPJ1
Design a C++ program with pseudocode that simulates a lottery game.
The California SuperLotto game is a perfect example of a lottery game. The SuperLotto game is designed to print five numbers randomly between 1 and 47 in one straight line, plus one random mega number between 1 - 27. Design a program that mimics this popular California game.
Ask the user for the number of lines to play (keep it at no more than 5 lines)
The output prints the number of lines
Next, print the mega number(s). Remember, the mega must equal the number of lines requested. For example, one line of SuperLotto would equal one mega number. Same would be for five lines of SuperLotto (5 SuperLotto = 5 mega numbers).
The numbers do not need to be in neither ascending nor descending order.
Validate your input by not allowing the user to enter a 0 for the number of lines to play. Display a message that says, "Incorrect value. Must be greater than 1".
Answer:
Explanation:
Design a C++ program with pseudocode that simulates a lottery game.The California SuperLotto game is a perfect example of a lottery game. The SuperLotto game is designed to print five numbers randomly between 1 and 47 in one straight line, plus one random mega number between 1 - 27. Design a program that mimics this popular California game.Ask the user for the number of lines to play (keep it at no more than 5 lines)The output prints the number of linesNext, print the mega number(s). Remember, the mega must equal the number of lines requested. For example, one line of SuperLotto would equal one mega number. Same would be for five lines of SuperLotto (5 SuperLotto = 5 mega numbers).The numbers do not need to be in neither ascending nor descending order.Validate your input by not allowing the user to enter a 0 for the number of lines to play. Display a message that says, "Incorrect value. Must be greater than 1".Answer:
Explanation:
Design a C++ program with pseudocode that simulates a lottery game.The California SuperLotto game is a perfect example of a lottery game. The SuperLotto game is designed to print five numbers randomly between 1 and 47 in one straight line, plus one random mega number between 1 - 27. Design a program that mimics this popular California game.Ask the user for the number of lines to play (keep it at no more than 5 lines)The output prints the number of linesNext, print the mega number(s). Remember, the mega must equal the number of lines requested. For example, onAnswer:
Explanation:
Design a C++ program with pseudocode that simulates a lottery game.The California SuperLotto game is a perfect example of a lottery game. The SuperLotto game is designed to print five numbers randomly between 1 and 47 in one straight line, plus one random mega number between 1 - 27. Design a program that mimics this popular California game.Ask the user for the number of lines to play (keep it at no more than 5 lines)The output prints the number of linesNext, print the mega number(s). Remember, the mega must equal the number of lines requested. For example, one line of SuperLotto would equal one mega number. Same would be for five lines of SuperLotto (5 SuperLotto = 5 mega numbers).The numbers do not need to be in neither ascending nor descending order.Validate your input by not allowing the user to enter a 0 for the number of lines to play. Display a message that says, "Incorrect value. Must be greater than 1".Answer:
Explanation:
Design a C++ program with pseudocode that simulates a lottery game.The California SuperLotto game is a perfect example of a lottery game. The SuperLotto game is designed to print five numbers randomly between 1 and 47 in one straight line, plus one random mega number between 1 - 27. Design a program that mimics this popular California game.Ask the user for the number of lines to play (keep it at no more than 5 lines)The output prints the number of linesNext, print the mega number(s). Remember, the mega must equal the number of lines requested. For example, one line of SuperLotto would equal one mega number. Same would be for five lines of SuperLotto (5 SuperLotto = 5 mega numbers).The numbers do not need to be in neither ascending nor descending order.Validate your input by not allowing the user to enter a 0 for the number of lines to play. Display a message that says, "Incorrect value. Must be greater than 1".e line of SuperLotto would equal one mega number. Same would be for five lines of SuperLotto (5 SuperLotto = 5 mega numbers).The numbers do not need to be in neither ascending nor descending order.Validate your input by not allowing the user to enter a 0 for the number of lines to play. Display a message that says, "Incorrect value. Must be greater than 1".
The ________ is an advanced networking consortium representing more than 100 countries.
The Internet2 is an advanced networking consortium representing more than 100 countries.
The worldwide body in charge of managing and supervising the coordination of the Internet's domain name system and its distinctive identifiers, such as IP addresses, is called the Internet Corporation for Assigned Names and Numbers (ICANN). The 802.15 wireless networking protocol, which is helpful for establishing small personal area networks, is more commonly referred to as Bluetooth (PANs). Using low-power radio-based communication, it can connect up to eight devices within a 10-meter radius and transmit data at up to 722 Kbps in the 2.4-gigahertz (GHz) range. In order for all Internet users to be able to find all legitimate addresses, ICANN is in charge of coordinating the operation of the DNS's technical components.
Learn more about internet here-
https://brainly.com/question/13308791
#SPJ4
you have two hyper-v hosts, each running three vms. you want to be able to periodically perform maintenance operations on the hosts without losing the services provided by the vms. you also want to maintain vm operation in the event of a host failure. you don't have shared storage between the hosts. what is the best way to accomplish this?
To maintain VM operation in the event of a host failure when there's no shared storage between the hosts, Enable replication.
What is a hyper-v host?
Hyper-V is a hardware virtualization product developed by Microsoft intended to allow users to create and run a digital or virtual version of a computer, called a virtual machine.
Here's the complete question:
You have two Hyper-V hosts, each running three VMs. You want to be able to periodically perform maintenance operations on the hosts without losing the services provided by the VMs. You also want to maintain VM operation in the event of a host failure. You don't have shared storage between the hosts. What is the best way to accomplish this?
a. Export the VMs.
b. Implement load balancing.
c. Enable replication.
d. Use vMotion.
Learn more about Virtual Machines from:
https://brainly.com/question/23341909?referrer=searchResults
#SPJ4
Cybersecurity applications, used across a broad range of industries and government sectors, represent ________ applications.
Cybersecurity applications, used across a broad range of industries and government sectors, represent DDoS security applications.
Cybersecurity is a process to protect sensitive data, networks, and application software from cyber-attacks. This attack can be considered as an exploitation of resources, unauthorized access to the system, extortion device attack ransomware attack to encrypt data and extort money.
It is not only important to know what cybersecurity is but also to understand why it can be important. The game has been taken to a higher level by hackers, so organizations and their employees need to know what risks they will face if not handled properly. The risks associated with cyber threats or cyber threats are high over time and security breaches can go unnoticed for months.
You can learn more about Cybersecurity here brainly.com/question/28112512
#SPJ4
a hacker has discovered a system vulnerability and proceeds to exploit it to gain access to the system. the vulnerability is not yet known to the developer so no fix is available. what type of attack is this?
Vulnerability - This is an example of a zero-day attack.
What is vulnerability?
Vulnerabilities are weaknesses in a computer system that reduce its overall security. Vulnerabilities might be flaws in the hardware itself or the software that uses it. A malicious actors, such as an attacker, can use vulnerabilities to breach privilege restrictions and carry out illegal actions on a computer system. An attacker needs at least one tool or technique that really can connect to a system flaw in order to exploit a vulnerability. In this context, the attack surface is another name for vulnerabilities. Discover all assets, prioritise assets, assess or do a full vulnerability scan, report on results, fix vulnerabilities, confirm remediation, and repeat are all frequent steps in the cyclical practise of vulnerability management.
To learn more about vulnerability
https://brainly.com/question/25633298
#SPJ4
which of the following statements is true about firmware? which of the following statements is true about firmware? firmware is the same as cache memory. firmware cannot be changed or upgraded. firmware is another name for linux. the software is not coded like other software. users do not need to load firmware into a device's memory.
The true statement about firmware is that users do not need to load firmware into a device's memory.
Firmware is a particular type of computer software that in computers controls the hardware at the lowest level. The basic functionalities of a device may be contained in firmware, such as the BIOS of a personal computer, which may also offer hardware abstraction services to higher-level software, such operating systems.
Firmware can serve as the entire operating system for simpler devices, handling all control, monitoring, and data manipulation tasks. Embedded systems (running embedded software), home and personal appliances, computers, and computer peripherals are typical examples of gadgets that contain firmware.
Non-volatile memory systems like ROM, EPROM, EEPROM, and Flash memory store firmware. Firmware updates necessitate the actual replacement of ROM integrated circuits or the reprogramming of EPROM or flash memory using a unique technique.
To know more about firmware click on the link:
https://brainly.com/question/14542785
#SPJ4
Write a program that inputs the length of two pieces of wood in yards and feet (as whole numbers) and prints the total.
Hint: Change all of the inputs into feet first - remember there are 3 feet in each yard. Now that the wood is in feet, find the yards and feet similarly to the last practice, using regular and modular division.
The program will be:
yard1 = int(input("Enter the Yards: "))
feet1 = int(input("Enter the Feet: "))
yard2 = int(input("Enter the Yards: "))
feet2 = int(input("Enter the Feet: "))
#For the first step you need to convert the yard to feet.
wood1 = (yard1 * 3) + feet1
print(wood1)
wood2 = (yard2 * 3) + feet2
print(wood2)
yard3 = ((wood1+wood2) // 3) #total feet converted to Yards
feet3 = ((wood1+wood2) % 3)#This is the remainder of feet.
print("Yards: " + str(yard3) + " Feet: " + str(feet3))
What is a program?
A computer program is a set of instructions written using a programming language and executable by a computer. Software contains computer program as well as documentation and other intangible components.
To learn more about program
https://brainly.com/question/23275071
#SPJ13
waze, a gps navigation app, relies on inputs from users to provide information on traffic conditions and uses artificial intelligence to develop algorithms for each user, tailoring the route map for that user at that particular moment. this is an example of
This is an example focused strategy
The example of a focused strategy is when someone utilizes artificial intelligence to create algorithms for a goal or when they rely on user input to provide information on traffic conditions.
What is focused strategy
focused strategy is when someone utilizes artificial intelligence to create algorithms for a goal or when they rely on user input to provide information on traffic conditions.
Focusing on a small, niche area of the market or industry is known as a focus strategy.
As a result, one example of focused approach is when someone uses artificial intelligence to create algorithms for a goal or when they rely on user input to provide information on traffic conditions.
To learn more about focus strategy refer to:
https://brainly.com/question/24242727
#SPJ4
The example of a focused strategy is when someone utilizes artificial intelligence to create algorithms for a goal or when they rely on user input to provide information on traffic conditions.
What is focused strategy?Focused strategy is when someone utilizes artificial intelligence to create algorithms for a goal or when they rely on user input to provide information on traffic conditions.
Focusing on a small, niche area of the market or industry is known as a focus strategy.
As a result, one example of focused approach is when someone uses artificial intelligence to create algorithms for a goal or when they rely on user input to provide information on traffic conditions.
To learn more about focus strategy refer to:
brainly.com/question/24242727
#SPJ4
is a component of the relational data model included to specify business rules to maintain the integrity of data when they are manipulated. business rule constraint data integrity business integrity data structure
Data integrity is a component of the relational data model included to specify business rules to maintain the integrity of data when they are manipulated.
What is data?Data simply refers to a representation of factual instructions (information) in a formalized and structured manner, especially as a series of binary digits (bits) or strings that are used on computer systems in a company.
What is the C-I-A security triad?The C-I-A security triad is an abbreviation for confidentiality, integrity, and availability. In Computer technology, the C-I-A security triad can be defined as a cybersecurity model that is designed and developed to guide security policies for information security in a business firm, in order to effectively and efficiently protect and make their data available to all authorized end users.
In this context, we can reasonably infer and logically deduce that data integrity is an essential part of any relational data model.
Read more on C-I-A security triad here: brainly.com/question/13384270
#SPJ1
Complete Question:
________ is a component of the relational data model included to specify business rules to maintain the integrity of data when they are manipulated.
(A) Business integrity
(B) Data structure
(C) Business rule constraint
(D) Data integrity
8. a priority queue (pq) is an abstract data type (adt) consisting of a set of elements of type record, where one of the fields is priority. the operations associated with this adt are:
A priority queue is an abstract data type used in computer science that is similar to a conventional queue or stack data structure but includes an additional priority attribute for each entry.
An item with a high priority is served before an item with a low priority in a priority queue. A unique kind of queue called a priority queue has elements that are each assigned a priority value. Additionally, elements are treated according to their priority. In other words, more important factors come first. When two items with the same priority come up, they are handled in the order they appear in the queue. Priority queue can be used to implement Dijkstra's method effectively when the graph is stored as an adjacency list or matrix.
Learn more about Priority queue here-
https://brainly.com/question/15002672
#SPJ4