Once upon a time, a mother duckling sat on her eggs with great impatience. How long would it be before they hatched? Finally, one summer day, the mother duckling watched as the eggs cracked, and her cute, yellow ducklings waddled into the world. She was filled with joy until she noticed that one egg, which was larger than all of the others, remained. After many hours, the egg cracked. A large, gray duckling emerged. The mother duck was horrified at the duckling's appearance. The mother duck's only comfort was that the ugly duckling could swim and dive under the water.

As the ugly duckling grew, many animals in the pond criticized him. His feathers were too dark, his neck was too long, and his body was too big. His fellow ducklings refused to recognize that underneath the feathers, the ugly duckling was kind, good, and gentle. The ugly duckling shed many tears because none of the other animals would play with him.

Read this excerpt from the fairy tale The Princess and the Pea.

One evening, there was a terrible storm. The wind howled, thunder shook the stone walls, and lightning filled the dark night sky. Through the pelting of the rain, there came a knock at the door. When the king opened the door, he saw a bedraggled girl, soaked to the skin and covered in mud. He ushered her into the castle so that she could warm herself by the fire.

"Why is a young servant girl like you wandering about on such a ferocious night?" queried the king.

The disheveled maiden looked at the king in disbelief. "I am a princess, come to see the prince," she explained, all the while shivering.

The king summoned his wife, the queen, for advice. The queen looked at the hideous creature in disbelief, thinking that no princess would ever allow herself to be found in such a state.

How do the authors illustrate the theme that people should not be judged based on their appearances?

Both authors show that the main characters are not afraid of getting wet and dirty in order to live active lives.
Both authors show the main characters being labeled in a negative manner based on their appearances.
Both authors showed the main characters exercising patience with other people.
Both authors showed the main characters wanting to make friends with others.

Answer:

5 moles

Explanation:

First, write out the balanced equation:

2Al + Fe₂O₃ → Al₂O₃ + 2Fe

Reaction ratio of Al to Fe₂O₃ is:

2 : 1

This means 2 moles of Al will react with 1 mole of Fe₂O₃

Al: 5 mol

Fe₂O₃: 3 mol

Multiply the reaction to get moles of both reactants you have:

2 : 1 (×⁵/₂) = 5 : ⁵/₂

2 : 1 (×3) = 6 : 3

In other words, 5 moles of Al will react with ⁵/₂ moles of Fe₂O₃;

And 3 moles of Fe₂O₃ will react with 6 moles of Al;

But, we do not have 6 moles of Al, therefore only the 5 moles of Al available will react;

5 moles of Al reacts with ⁵/₂ moles of Fe₂O₃, as we can see from the ratios we calculated above, the remaining ¹/₂ mole of Fe₂O₃ will not react;

We say that Al is the limiting reactant because all the Al will react but all the Fe₂O₃ does not (i.e. it is in excess);

Next and last, the reaction ratio of Al to Fe is:

2 : 2 or, more simply 1 : 1

This means the moles of Al that reacts is the equal to the moles of Fe produced from the reaction;

We've established that 5 moles of Al will react with ⁵/₂ moles of Fe₂O₃, so 5 moles of Fe will also be produced (since the ratio is 1 : 1);

You could also work this out using the moles of Fe₂O₃ that react;

The reaction ratio of Fe₂O₃ to Fe:

1 : 2

So the moles of Fe produced is 2× the moles of Fe₂O₃;

If ⁵/₂ moles of Fe₂O₃ reacts, then simply multiply this by 2 which is 5 moles

Answer:

may be the answer is Heat and pressure - melting - cooling

Answer:

Explanation:

The answer is C Enthaply and entropy because temperature plays a big role in reactions

Answer:

c

Explanation:

a p e x :)

Answer:

The temperature on the graph is higher at point 5 than at point 1.  The correct answer is the last answer choice that you showed.

Explanation:

The temperature at point 1 is -10 degrees Celsius, while the temperature at  point 5 is 120 degrees Celsius. This is a 1300% increase.

See the calculation here: https://www.calculatorsoup.com/calculators/algebra/percent-change-calculator.php?v_1=-10&v_2=120&action=solve

I hope this helps.  

Answer:

7

Explanation:

took test

Answer:

1. Hidracidas a. MX

2 Acidas c. MHXO

3. Oxacidas  b. MXO

4. Basicas d. M(OH)X

Explanation:

¡Hola!

En este caso, de acuerdo con el concepto de sal, la cual está generalmente dada por la presencia de al menos un metal y un no metal, es posible encontrar cuatro tipos de estas; hidrácidas, oxácidas, básicas y ácidas, en las que las primeras dos son neutras pero la segunda tiene presencia de oxígeno, la tercera tiene iones hidróxido adicionales y la cuarta iones hidrógeno de más.

Debido a la anterior, es posible relacionar cada pareja de la siguiente manera:

1. Hidracidas a. MX

2 Acidas c. MHXO

3. Oxacidas  b. MXO

4. Basicas d. M(OH)XO

En las que M se refiere a un metal, X a un no metal, H a hidrógeno y O a oxígeno.

¡Saludos!

Answer: I think it would be -23

Explanation:

Answer: There are [tex]12.71 \times 10^{-9}[/tex] moles present in [tex]2.11 \times 10^{14}[/tex] molecules of LiBr.

Explanation:

According to the mole concept, there are [tex]6.022 \times 10^{23}[/tex] molecules present in 1 mole of a substance.

Hence, moles in [tex]2.11 \times 10^{14}[/tex] molecules of LiBr are calculated as follows.

[tex]Moles = \frac{2.11 \times 10^{14}}{6.022 \times 10^{23}}\\= 12.71 \times 10^{-9}[/tex]

Thus, we can conclude that there are [tex]12.71 \times 10^{-9}[/tex] moles present in [tex]2.11 \times 10^{14}[/tex] molecules of LiBr.

Answer:

k = 1.26 x 10^-12

Its extremely small.

It follows that when k is small... The equilibrium concentration of Reactant is large and More than Product.

Option C should be your answer

[tex]1 \text{ mol of H}_2 \text{O} \equiv 18 \text{ g} \implies 0.251 \text{ moles of H}_2 \text{O} \equiv 4.518 \text{ g}[/tex]

Answer:

12

Explanation:

there are 12 because of the desnity

Answer:

Elementos.

Explicación:

Los elementos son las sustancias puras que están formadas por el mismo tipo de átomos, es homogéneo y no se puede descomponer por medios químicos. El elemento tiene el mismo tipo de átomos que son similares en tamaño y forma. Es un tipo de materia pura que tiene solo un tipo de átomos y no se puede descomponer más porque no está hecha de dos sustancias, es solo una sustancia, por eso no se puede descomponer por medios químicos.

__________________________________________________________

Which equation should you use?

B. P₁V₁=P₂V₂

What is the new pressure?  

✔ 5000  kPa

__________________________________________________________

The problem gives initial volume (2.00 L), final volume (20.0 mL), and initial pressure (50.0 kPa). Then it asks to find the final pressure. Answer B has all these variables, with P₁=initial pressure, P₂=final pressure, V₁=initial volume, and V₂=final volume. Plug the given values into the equation and then solve for the unknown value, which is P₂, final pressure.

When plugging in the values, use consistent units. 2L=2000 mL, I chose to make the consistent unit in mL. You'll get the same answer if you choose to use L as the consistent unit.

[tex]2000*50=20*P2[/tex]

[tex]100000=20*P2[/tex]

Divide both sides by 20

[tex]100000/20=(20*P2)/20[/tex]

[tex]5000=P2[/tex]

Here's a photo of Edge just incase.

Answer:

Volume; high temperature and pressure

Explanation:

In an explosive combustion the rapid expansion of the volume causes explosion and the production of high temperature and pressure.

The substance is usually in a confined place and the expansion usually reaches a breaking point in which it is expelled from the space usually accompanied with a loud noise and high amount of temperature and pressure change thereby releasing its gas constituents.

Answer:

7800 cells

Explanation:

The number of Escherichia coli cells N after n generations is given by

N = 2ⁿ × N₀ where N₀ = initial population

Now making N₀ subject of the formula, we have

N₀ = N/2ⁿ

Since n = 8 and N = 1,996,800 cells, substituting the values of the variables into the equation, we have

N₀ = N/2ⁿ

N₀ = 1,996,800 cells/2⁸

N₀ = 1,996,800 cells/256

N₀ = 7800 cells

So, the initial population of Escherichia coli cells is 7800 cells.

Answer:

97200 J

Explanation:

Applying,

K.E = mv²/2.................. Equation 1

Where K.E = Kinetic Energy, m = mass of the roller coaster car, v = velociety of the roller coaster car.

From the question,

Given: m = 600 kg, v = 18 m/s

Substitute these values into equation 1

K.E = (600×18²)/2

K.E = 97200 J.

Hence the kinetic energy of the car is 97200 J

Answer:

1. (a) delivered volume, (b) to reach, (a) moles

2. (c) molar ratio

3. (b) acid solution before.

Explanation:

1. You must titrate the acid with a base solution of known concentration, and use the (a) delivered volume. At the endpoint, the moles of acid and base in the titration follows the chemical equation, thus, you need (b) to reach the endpoint. With volume and concentration of the base we can find its (a) moles

2. With the (c) molar ratio, we can relate the moles of base with the moles of acid

3. When we have the moles of acid, we just need the volume of (b) acid solution before the titration to find molarity of the acid.

Answer:

1/....

Explanation:

If we say acceleration 'a' is inversely proportional to mass 'm', then

a=1/m.

Answer:

2 moles of ammonia gas (NH₃) reacts with 5/2 moles of oxygen gas (O₂) to produce 2 moles of nitrogen monoxide gas (NO) and 3 moles of liquid water (H₂O)

Explanation:

The chemical equation is:

NH₃(g) + O₂(g)⇒ NO(g) + H₂O(I)

First, we have to distinguish which are reactants and which are products.

Reactants ⇒ left side: NH₃ (ammonia gas) and O₂ (oxygen gas)

Products ⇒ right side: NO (nitrogen monoxide) and H₂O (water)

Thus, ammonia gas reacts with oxygen gas to produce nitrogen monoxide gas and liquid water.

The reaction is not balanced, because it does not has the same number of atoms of each chemical element in both sides. To balance, we have to write a coefficient of 3 for H₂O, then a coefficient of 2 for NH₃ (to balance H atoms), then a coefficient of 2 for NO, and finally a coefficient of 5/2 for O₂ (to obtain 5 atoms of O in both sides):

2 NH₃(g) + 5/2 O₂(g)⇒ 2 NO(g) + 3 H₂O(I)

According to the balanced equation, 2 moles of ammonia gas (NH₃) reacts with 5/2 moles of oxygen gas (O₂) to produce 2 moles of nitrogen monoxide gas (NO) and 3 moles of liquid water (H₂O).

ur best try is to copy and paste and change some words.

Answer:

24 atm.

Explanation:

From the question given above, the following data were obtained:

Initial volume (V₁) = 240 L

Initial pressure (P₁) = 2 atm

Final volume (V₂) = 20 L

Temperature = constant

Final pressure (P₂) =?

The final pressure required, can be obtained by using the Boyle's law equation as shown below:

P₁V₁ = P₂V₂

2 × 240 = P₂ × 20

480 = P₂ × 20

Divide both side by 20

P₂ = 480 / 20

P₂ = 24 atm

Thus, the final pressure required is 24 atm.

Answer:

Explanation:

It can be determined by measuring the Ph. D is incorrect.

C: is wrong because if you are making something acidic, you are increasing the H+

B: is the correct answer.

A: pH decreases. H+ increases which makes the Ph decrease. It is an oddity of the formula that makes this happen.

Answer: hello your question has some missing details attached below is the missing details

answer : 25.5%  ( B )

Explanation:

Determine percentage yield

molar mass = 35 g/mol

mass of Li₃N(s) = 70 g

product  LiH(s) = 8.0 g ( actual yield )

theoretical yield ( LiH ) =  4 * 7.95  = 31.8 g

percentage yield = actual yield * 100 / theoretical yield

                            = 8 * 100/31.8

                            = 25.5%

Answer:

Passage?

Explanation:

Answer:

D a plank floating on water

Explanation:

Its not a mixture

Answer:

Percentage of copper in sample = 60%

Explanation:

Given:

Mass of copper = 150 gram

Mass of brass = 250 gram

Find:

Percentage of copper in sample

Computation:

Percentage of copper in sample = [Mass of copper / Mass of brass]100

Percentage of copper in sample = [150/250]100

Percentage of copper in sample = [0.6]100

Percentage of copper in sample = 60%

Answer: cuhh

Explanation:

Answer:

the correct answer is gravity

Answer:

the gravitational pull so gravity (b)