Question 13 of 20
A copper atom has an atomic number of 29 and an atomic mass of 64. What
is the structure of this atom?
A. It has a central nucleus composed of 29 protons and 29 neutrons,
surrounded by an electron cloud containing 35 electrons.
B. It has a central nucleus composed of 29 protons and 35 neutrons,
surrounded by an electron cloud containing 29 electrons.
O C. It has a central nucleus composed of 35 protons and 29 neutrons,
surrounded by an electron cloud containing 29 electrons.
D. It has a central nucleus composed of 29 protons and 64 neutrons,
surrounded by an electron cloud containing 29 electrons.
SUBMIT

Answers

Answer 1

Answer:

B. It has a central nucleus composed of 29 protons and 35 neutrons,

surrounded by an electron cloud containing 29 electrons.

Explanation:

Protons and neutrons are the only subatomic particles with mass, and they are located in the nucleus. If this atom has an atomic number of 29 and is copper, it must have 29 protons (protons define which element is being observed). This means all remaining mass is from neutrons. 64-29 = 35.

Electrons have no mass and orbit the nucleus in the electron cloud. Since this copper atom is neutral (we are not told it has a charge), there must be an equal number of protons and electrons.

Answer 2

Answer:

B. It has a central nucleus composed of 29 protons and 35 neutrons,

surrounded by an electron cloud containing 29 electrons.

Explanation:

Hope this helps


Related Questions

who Henry Mosléy?!!!​

Answers

Answer:

Henry Moseley was an English physicist whose contribution to the science of physics was the justification from physical laws of the previous empirical and chemical concept of the atomic number.

Suppose you have a 34.9 m length of copper wire. If the wire is wrapped into a solenoid 0.240 m long and having a radius of 0.0510 m, how strong is the resulting magnetic field in its center when the current is 11.0 A?

Answers

Answer:

the strength of the magnetic field inside the solenoid is 6.278 x 10⁻³ T.

Explanation:

Given;

length of the wire, = 34.9 m

length of solenoid, L = 0.24 m

radius of the solenoid, r = 0.051 m

current in the solenoid, I = 11.0 A

The number of turns of the wire is calculated as follow;

[tex]N = \frac{34.9}{2\pi \times 0.051} = 109 \ turns[/tex]

The strength of the magnetic field inside the solenoid is calculated as follows;

[tex]B = \mu_0 (\frac{N}{L} )I\\\\B = 4\pi \times 10^{-7} \times (\frac{109}{0.24} )\times 11.0 \\\\B = 6.278 \times 10^{-3} \ T[/tex]

Therefore, the strength of the magnetic field inside the solenoid is 6.278 x 10⁻³ T.

Use the drop-down menus to identify the order of these images for the formation of our solar system. A collapsed nebula flattens into a disc. A collapsed solar nebula. An image of our solar system. nebula. An image of our solar system.

Answers

Answer: 2              1                  3  

is your answer

Explanation:

your'e welcome

Answer:

First one = 2

Second one = 1

Third one = 3

Explanation:

2       1      3

can i get brainliest I need it please

When naming the compound containing lithium and chlorine, change the
suffix of the anion's name to
O A. ide
B. ite
C. cation
D. anion

Ape_x

Answers

Answer: Ide

Explanation:

Just got it right on the quiz

Answer:Ide

Explanation: thats the answer for a pex

Which of these is a unique use of gamma radiation?
A. Detection of thyroid cancer
O B. CT scanners
C. Smoke detectors
D. Killing bacteria
SUBMIT
Who knows

Answers

Answer:

the answer would be 'd'

Explanation:

im really good at this stuff

The unique use of gamma radiation is Killing bacteria. The correct option is D.

What is gamma radiation?

Gamma radiation is a type of electromagnetic radiation that is highly energetic and has no mass or charge. It is the most penetrating form of radiation and is often emitted during radioactive decay or nuclear reactions. Gamma rays have the shortest wavelengths and highest frequencies in the electromagnetic spectrum, ranging from about 0.1 nanometers to 10 picometers in wavelength. They can cause ionization in matter, meaning they can knock electrons out of atoms or molecules, making them highly damaging to living tissue. Gamma radiation is commonly used in medical imaging and cancer treatment, as well as in industrial applications for sterilization and food preservation.

Here in the Question,

Option A. Detection of thyroid cancer: Gamma radiation is used in medical imaging techniques such as PET scans and SPECT scans to diagnose cancerous conditions, but it is not unique to the detection of thyroid cancer.

Option B. CT scanners: Gamma radiation is not used in CT (computed tomography) scanners. CT scanners use a series of X-rays to produce detailed images of the inside of the body.

Option C. Smoke detectors: Smoke detectors use a small amount of radioactive material, typically americium-241, to ionize air particles and detect the presence of smoke. While gamma radiation is a type of ionizing radiation, smoke detectors do not use gamma radiation specifically.

Option D. Killing bacteria: Gamma radiation is used in the food industry to kill bacteria and sterilize food products, such as spices, meat, and poultry. This is a unique use of gamma radiation, as it relies on its ability to destroy microorganisms at high doses while leaving no residual radiation.

Therefore, The correct answer is option D i.e Killing bacteria.

To learn more about Electromagnetic radiation click:

https://brainly.com/question/10759891

#SPJ2

I need help again!!!!!! Due today!!!! NO LINK PLEASE

Answers

Answer:

The Acceleration of the object = 6.4 m/s²

Explanation:

Mass of block (m) = 5 kg

Action force on block, (F₁) = 40 N

To Find:

Acceleration of the object (a) = ?

Required solution:

Frictional force opposing the motion (F₂) = 8 N

Here in this question we have to find Acceleration of the object. So, firstly we have to find Net force of block after that we will find Acceleration of the object on the basis of conditions given above

⇒ Net force = Action force on block - Opposing friction force

⇒ F = F₁ - F₂

⇒ F = 40 - 8

⇒ F = 32 N

Now, we have to two elements that used in formula, Net force and Mass of block.

Net force of the block (F) = 32 N

Mass of block (m) = 5 kg

And we have to find Acceleration of the object.

We can find Acceleration of the object by using the Second law of Newton which says F = ma

Here,

F is the Force in N.

m is the Mass in kg.

a is the Acceleration in m/s².

So let's find Acceleration (a) !

† From second law of Newton

⇛ F = ma

⇛ a = F/m

⇛ a = 32/5

⇛ a = 6.4 m/s²

638 nm light passes through a single
slit. The third (m = 3) diffraction
minimum occurs at an angle of 5.48º.
What is the width of the slit?

Answers

which class question is this

Answer:

2.00

Explanation:

Move the sinθ to the right.

I walked my dog 100 meters North to the end of the block, and 50 meters East to the park. After the park, I walked 60 meters South to my friend’s house.

What is the total distance traveled?

Is the displacement of my journey scalar or vector?

Answers

Answer:

Explanation:

What is the total displacement of a student who walks 3 blocks east, 2 blocks north ... The displacement of the car at the end of this 1.0-second interval is ... Compared to the total distance traveled by the player, the magnitude of the ... Then she turns and walks 30. meters south to an art classroom. ... What is a scalar quantity?

When a pot of water sits on a hot stove the metal is He did and then transferred into heat to the world of student claims that conduction is the only type feet transfer occurring which statement explains why the students idea is incorrect

Answers

Answer:

Hello your question is poorly written hence I will just give the difference between conduction and convection

answer :

Conduction occurs when there is direct contact between solids and source of heat. while convection occurs when there is transfer of thermal energy due to movement of liquid or gas

Explanation:

when a pot of water is placed on a hot stove the pot is heated through conduction because the metal pot is in direct conduct with the heat from the stove ( which is the primary source of heat in this scenerio ).

while the heat transfer from the hot pot to the water is executed through convection this is because heat transfer via convection requires the movement of liquid or gas.  as the warmer liquid moves over to the top the cooler liquid goes below inside the pot that way the whole liquid becomes warm .

What’s your pets name if you have one if not what’s a pet that you do want for brainliest :]

Answers

Answer:

I do have a pet

Explanation:

his name is shadow and he's a cat

Two thin lenses of power +3.5 D and -2.5 D are placed in contact,

find the power and focal length of the lens combination.​

Answers

Answer:

P = 1 D

f = 1 m = 100 cm

Explanation:

The power of the combination of lenses is simply found out by adding the power of the individual lens:

[tex]P = P_{1}+P_{2}[/tex]

where,

P = Power of combination of lenses = ?

P₁ = Power of first lens = 3.5 D

P₂ = Power of second lens = -2.5 D

Therefore,

[tex]P = 3.5\ D - 2.5\ D[/tex]

P = 1 D

Now, for focal length:

[tex]Focal\ Length = f = \frac{1}{D}\\\\f = \frac{1}{1\ D}[/tex]

f = 1 m = 100 cm

plz help me

Your friend has a mass of 70 kg and is running at a velocity of 3 m/s. What is their kinetic energy?​

Answers

Answer:

TINAAA

Explanation:

.) Which of the following statements is true?
a) A scalar quantity can be added to a vector
b) It is possible for the magnitude of a vector to equal zero even though one of its components
is non-zero
c) Scalar quantities are path dependent, while vectors are not.
d) Scalar quantities and vector quantities can both be added algebraically

Answers

Im pretty sure B is the correct answer. I hope that helped you.

Please help /Show work

Answers

The picture shows all of my work:)

A roller coaster car is traveling at a constant 3 m/s when it reaches a downward slope. On the slope, the car accelerates at a constant rate of 4.5 m/s​ 2​ . The length of the slope is 45 meters. A) Find the velocity of the car at the bottom of the hill. B) Find the time of travel.

Answers

Answer:

Velocity of the car at the bottom of the slope: approximately [tex]20.3\; \rm m \cdot s^{-2}[/tex].

It would take approximately [tex]3.9\; \rm s[/tex] for the car to travel from the top of the slope to the bottom.

Explanation:

The time of the travel needs to be found. Hence, make use of the SUVAT equation that does not include time.

Let [tex]v[/tex] denote the final velocity of the car. Let [tex]u[/tex] denote the initial velocity of the car.Let [tex]a[/tex] denote the acceleration of the car. Let [tex]x[/tex] denote the distance that this car travelled.

[tex]v^2 - u^2 = 2\, a\cdot x[/tex].

Given:

[tex]u = 3\; \rm m \cdot s^{-1}[/tex].[tex]a = 4.5\; \rm m \cdot s^{-2}[/tex].[tex]x = 45\; \rm m[/tex].

Rearrange the equation [tex]v^2 - u^2 = 2\, a\cdot x[/tex] and solve for [tex]v[/tex]:

[tex]\begin{aligned}v &= \sqrt{2\, a \cdot x + u^2} \\ &= \sqrt{2 \times 4.5\; \rm m \cdot s^{-2} \times 45\; \rm m + \left(3\; \rm m \cdot s^{-1}\right)^{2}} \\ &\approx 20.3\; \rm m \cdot s^{-1}\end{aligned}[/tex].

Calculate the time required for reaching this speed from [tex]u = 3\; \rm m \cdot s^{-1}[/tex] at [tex]a = 4.5\; \rm m \cdot s^{-2}[/tex]:

[tex]\begin{aligned}t &= \frac{v - u}{a} \\ &\approx \frac{20.3\; \rm m \cdot s^{-1} - 3\; \rm m \cdot s^{-1}}{4.5\; \rm m \cdot s^{-2}} \approx 3.9\; \rm m \cdot s^{-1}\end{aligned}[/tex].


How much work is done when a 100 N force moves a block 20 meters

Answers

Answer:

Hope this helps if not so sorry ;-;

Explanation:

Work is done when a force that is applied to an object moves that object. The work is calculated by multiplying the force by the amount of movement of an object (W = F *

Note:

Have a nice day :)

how much water makes up earth in percentages? thx?

Answers

Answer:

71%

Explanation:

PLEASE HELPPPPP I WILL GIVE POINTS AND BRAINIEST

Answers

Answer:

Graph A

Explanation:

I hope this is right

I agree^ fjidnsnwjskocucuhrebnaosicuej

Give an example of an atom that will give up its outermost electron easily. Explain why you chose this atom.

Answers

Answer:

Cesium (Cs)

very low electronegativity

there are a bunch of cool videos online about Cesium reacting with water

most are faked but the general idea is a cool one as Cesium very quickly and easily gives up it's one and only outermost (or valence) electron

Explanation:

Pendulum In this task, you’ll make a pendulum and analyze its swing. a hand holding a swinging pendulum shown in three positions Estimated time to complete: 20 minutes You will need these materials: goggles golf ball (or similar size ball) plastic sandwich bag tape hole punch or scissors 1 foot of string metal lid or pan Stay safe! Always wear your safety goggles. Part A Place the ball in the plastic bag, and twist the top so the ball is secure in the bag. Wrap the twisted portion with tape so it stays tight. Use the hole punch or scissors to poke a hole in the part of the bag that’s above the ball. Slip an end of the string through the hole, and tie a knot. This is your pendulum. Hold the loose end of the string still with one hand. With the other hand, raise the ball in an arc so that it’s almost level with the hand holding the string. With the string taut, let the ball go. What do you observe? Font Sizes Characters used: 0 / 15000 Part B Why did the pendulum stop swinging? Where did the energy go? Font Sizes Characters used: 0 / 15000 Part C Scientists have organized all forms of energy into two types—kinetic and potential. Kinetic energy is the energy of motion, and potential energy is stored energy. At the top of its swing, does the pendulum have kinetic or potential energy? Font Sizes Characters used: 0 / 15000 Part D At the bottom of its swing, does the pendulum have kinetic or potential energy? Font Sizes Characters used: 0 / 15000 Part E Think about the process of raising the pendulum to one side and letting it go. For this event, create a list of each form of energy associated with the pendulum as it cycles. Font Sizes Characters used: 0 / 15000 Part F How could you give the pendulum more energy? Font Sizes Characters used: 0 / 15000 Part G Now raise the pendulum and let it hit a metal lid or pan. When the ball strikes the lid, what forms of energy can you identify?

Answers

Answer:

A: Place the ball in the plastic bag, and twist the top so the ball is secure in the bag. Wrap the twisted portion with tape so it stays tight. Use the hole punch or scissors to poke a hole in the part of the bag that’s above the ball. Slip an end of the string through the hole, and tie a knot. This is your pendulum. Hold the loose end of the string still with one hand. With the other hand, raise the ball in an arc so that it’s almost level with the hand holding the string. With the string taut, let the ball go. What do you observe?

Mine was swaying perfectly fine. after a little bit it gradually started swinging slower until stopped.

B: Why did the pendulum stop swinging? Where did the energy go?

gravity was pulling it towards the ground, however the weight and momentum of the ball helped it keep swinging for a good while.

C: Scientists have organized all forms of energy into two types—kinetic and potential. Kinetic [THE ENERGY OF MOTION IN A BODY] energy is the energy of motion, and potential energy [THE STORED ENERGY IN AN OBJECT] is stored energy. At the top of its swing, does the pendulum have kinetic or potential energy?

when its at the very top of the swing it does have a very small amount of time until it starts going back down again but during that time it is potential energy

D: At the bottom of its swing, does the pendulum have kinetic or potential energy?

the pendulum still has kinetic energy when it is the closest to the ground since it is still swinging

E: Think about the process of raising the pendulum to one side and letting it go. For this event, create a list of each form of energy associated with the pendulum as it cycles.

when its in my hand: potential energy

when it starts swinging: kinetic energy

when its going upwards: kinetic energy

when it stops swinging: potential energy

F: How could you give the pendulum more energy?

one way you could possibly make it have more energy is if you make the string longer

G: Now raise the pendulum and let it hit a metal lid or pan. When the ball strikes the lid, what forms of energy can you identify?

I could hear sound energy when the two made contact but for the most part it was kinetic energy

Answer:

I could hear sound energy when the two made contact but for the most part it was kinetic energy

Explanation:

If the reference point changes, the ______ of position changes, but the actual position does not change

Answers

Answer:

Description.

Explanation:

Motion can be defined as a change in the location (position) of a physical object or body with respect to a reference point.

This ultimately implies that, motion would occur as a result of a change in location (position) of an object with respect to a reference point or frame of reference i.e where it was standing before the effect of an external force.

Mathematically, the motion of an object is described in terms of acceleration, time, distance, speed, velocity, displacement, position, etc.

A reference point refers to a location or physical object from which the motion (movement) of another physical object or body can be determined.

For example, a point on a map is considered to be a reference point because it represents the starting point of an object or person in motion.

Hence, if the reference point changes, the description of position changes, but the actual position does not change.

What is the density of a substance of volume 3 m3and mass 9 kg?

Answers

Answer:

Density = 3 kg/m³

Explanation:

Given the following data;

Volume = 3m³

Mass = 9 kg

To find the density;

Density can be defined as mass all over the volume of an object.

Simply stated, density is mass per unit volume of an object.

Mathematically, density is given by the formula;

[tex]Density = \frac{mass}{volume}[/tex]

Substituting into the formula, we have;

[tex]Density = \frac{9}{3}[/tex]

Density = 3 kg/m³

Directions: Read each statement and determine if it is describing speed or
velocity. Write your answer on the space provided before the number.
1. Jackson ran 5k in 24 minutes.
2. A storm is travelling 25 km/hour eastward.
3. John walked 420 m in 17.5 seconds.
4. Zart moved the desk 34 cm to the left.
5. A hurricane travels 360 km in 15 hours.
6. Meredith runs 400 meters in 50 seconds.
7. Stephen Jay swims 110 m towards the shore in 72 seconds.
8. Vince throws a baseball 38 m from third base to first base in 1.7 seconds.

Answers

Answer:

Find answers below.

Explanation:

Velocity can be defined as the rate of change in displacement (distance) with time. Velocity is a vector quantity and as such it has both magnitude and direction.

Mathematically, velocity is given by the equation;

[tex]Velocity = \frac{distance}{time}[/tex]

Speed can be defined as distance covered per unit time. Speed is a scalar quantity and as such it has magnitude but no direction.

Mathematically, speed is given by the formula;

[tex]Speed = \frac{distance}{time}[/tex]

1. Speed: Jackson ran 5k in 24 minutes.

2. Velocity: A storm is travelling 25 km/hour eastward.

3. Speed: John walked 420 m in 17.5 seconds.

4. Velocity: Zart moved the desk 34 cm to the left.

5. Speed: A hurricane travels 360 km in 15 hours.

6. Speed: Meredith runs 400 meters in 50 seconds.

7. Velocity: Stephen Jay swims 110 m towards the shore in 72 seconds.

8. Velocity: Vince throws a baseball 38 m from third base to first base in 1.7 seconds.

A car is traveling 50 mph. It leaves Boston, Massachusetts at 5 a.m. and is
traveling to Hartford, Connecticut, which is 100 miles away. Without traffic
problems or stops, about what time should the car arrive in Hartford?

Answers

7 A.M
I’m pretty sure that’s it

What is the difference between the law of gravity and the theory of gravity?

Answers

Answer:

In the language of science, a theory is an explanation of why and how things happen. For gravity, we use Einstein's Theory of General Relativity to explain why things fall. ...While laws rarely change, theories change frequently as new evidence is discoevered.

Raven, Omega, and Red Knight are trying to earn battle stars in physics class by solving energy problems. All three have the same mass. Raven runs up the stairs in 4 seconds, Omega skips up the stairs in 6 seconds, and Red Knight walks up the stairs in 15 seconds. Which skin has the greatest power?


a) red knight

b) they're all the same

c)raven

d)omega​

Answers

Is this some kind of fortntie questions?

The part of the lithosphere under the ocean are less dense then those under the continents. True or false

Answers

Answer:

False

Explanation:

The outer part of the Earth that is hard and solid is termed as lithosphere. It is the outermost part of the Earth's surface. The lithosphere covered under the oceans is the oceanic lithosphere while the lithosphere comprising the continental area is the continental lithosphere. Oceanic lithosphere is denser than the continental lithosphere because of the thin layer of the Earth that exists under the oceans.

In asexual reproduction the new plant is identical to its parent.


true


false

Answers

Answer:

YES

Explanation:

Asexual means the plant is identical to the parent

Answer:

true

Explanation: Asexual reproduction produces plants that are genetically identical to the parent plant because no mixing of male and female gametes takes place.

Which is an example of a projectile?

An arrow stored in a quiver
A trapeze artist hanging from a swing
A bullet loaded into a gun's chamber
A child jumping off of a swing set

Answers

an arrow stored in a quiver i think

Answer: A child jumping off of a swing set

Explanation: A projectile is any object thrown into the air, so the child is the only thing in the air thats moving.

Which image shows a situation where conduction occurs?

A box full of pieces of metal.

A woman holds a steaming mug.

A woman holds a frying pan above a stove while stirring.

Answers

Answer: A woman holds a steaming mug

Explanation:

Just did it

Other Questions
Kinnear Plastics manufactures various components for the aircraft and marine industry. Kinnear buys plastic from two vendors: Tappan Corporation and Hill Enterprises. Kinnear chooses the vendor based on price. Once the plastic is received, it is inspected to ensure that it is suitable for production. Plastic that is deemed unsuitable is disposed of. The controller at Kinnear collected the following information on purchases for the past year: Tappan Hill Total purchases (tons) 4,000 6,500 Plastic discarded 100 520 The purchasing manager has just received bids on an order for 310 tons of plastic from both Tappan and Hill. Tappan bid $1,950 and Hill bid $1,886 per ton.Required:a. Assume that the average quality, measured by the amounts discarded from the two companies, will continue as in the past. What is the effective cost per ton for both Tappan and Hill?b. Assume all else remains the same. What bid by Tappan would make Kinnear indifferent between buying from Tappan or Hill? The cookie recipe called for oatmeal and raisins in the ratio of 3 to 1. If 4 cups of oatmeal were called for, how many cups of raisins were needed? which is a property of a parallelogram? in correct order pleaseFt. Sumter fired uponDred Scott decision Uncle Tom's Cabin published Compromise of 1850Election of Abraham LincolnKansas-Nebraska Act Missouri Compromise Tariff of Abominations (comer) Maria __________ la pizza en la pizzeria con amigos despues de clases. Seced after Abraham Lincoln was elected presdient? 8. A student looks at the dihybrid cross shown above and comes to theconclusion that it is not possible for a tall pea plant with purple flowers tobe produced in this cross. Is the student correct? please help!! will give brainliest!!!!100,78,93,84,91,100,82,79what is the MAD?A. 7.625B.61C.88.4D.8 bcr is an out put device true or false A survey was taken of students in math classes to find out how many hours per day students spend on social media. The survey results for the first-, second-, and third-period classes are as follows: First period: 2,4,3,1,0,2,1,3,1,4,9,2,4,3,0 Second period: 3.2.3.1.3, 4.2, 4.3, 1.0.2, 3, 1.2 Third period: 4,5, 3, 4, 2, 3, 4, 1, 8, 2, 3, 1, 0, 2, 1, 3 Which is the best measure of center for second period and why? Help!Please and thank you What is the conflict on how my brother leon brought home a wife? help me please ?????? I need answers to this please: Cmo se reproducen las bacterias? Please answer you will get 10 points. How did Western powers take control of smaller Pacific islands? How did the Dred Scott case change citizenship in the United States? YALL HURRYY I NED HELP!At the begging of the week, Mr. Burris opened a new box of 125 pencils. Sixty five pencils were used during the week. Which equation could be used to find x the number of pencils left at the end of the week?a. x + 65 = 125b. 65 - 125 = xc. x - 65 = 125d. 65x = 125- also what is the answer if u solve for x Which equation is graphed here?A) y=3B) x=3C) y+1=3D) x-1=3