The correctly drawn Lewis structure for CBr4 will have1. 3 single bonds to carbon and 2 single bonds to a terminal bromine2. 2 single bonds to carbon and 2 double bonds to terminal bromine3. 4 single bonds to carbon4. 2 single bonds to carbon and 1 single bond to a terminal bromine5. 2 single bonds to carbon and 2 single bonds to terminal bromine

The amount of work (in J ) is involved in a chemical reaction if the volume decreases from 4.25 to 1.97 L against a constant pressure of 0.838 atm is: 8.78 Joules.

The work done by an object can be calculated by multiplying the force acting on it by the perpendicular distance covered by the physical object. Also, the work done during a chemical reaction can be determined by multiplying the change in volume by the accompanying level of pressure.

Mathematically, the work done by a system is given by the formula:

Work done = PΔV = P(V₂ - V₁)

Where:

Substituting the given parameters into the formula, we have;

Work done = 0.038(4.25 - 1.97)

Work done = 0.038(2.28)

Work done = 0.08664 L.atm

Next, we would convert L.atm to Joules:

Work done = 101.325 × 0.08664

Work done = 8.78 Joules.

Read more on work done here: https://brainly.com/question/25086088

#SPJ1

Any substance made of matter is by definition a chemical, which includes solids, liquids, and gases. Pure substances or mixtures of substances can both be found in chemicals. Water (H2O), for example, is a pure chemical because the same molecules and molecular combinations are present throughout its whole structure.

Any material with a known composition is a chemical. Some chemicals, like water, are found in nature, meaning they always consist of the same "stuff." Other chemicals, including chlorine, are produced (used for bleaching fabrics or in swimming pools).

A chemical compound is a material that contains a specific combination of atoms or ions. Chemical compounds are made up of two or more elements coming together through a chemical process. While all substances are compounds, not all substances are compounds.

On its list of substances covered by the Toxic Substances Control Act, the EPA has more than 85,000 chemicals listed.

Not all chemicals are detrimental to the economy.

To learn more about Chemicals refer to:

https://brainly.com/question/26487468

#SPJ13

Oxidation takes place at the anode. Reduction takes place at the cathode. Oxidation takes place on the left and recution takes place on the right.

The standard cell notation for an electrolytic cell with alumium and gold electrodes:

To determine which metal undergoes oxidation and which undergoes reduction we use the standard cell potentetial of the metals. Au is the stronger oxidising agent of the two and so it is likely to undergo reduction and so the Al will undergo oxidation.

Answer: A

The strong base to be in equilibrium refers to shifting towards the left side of the reaction and far away from the right side i.e option 1

What do you understand by equilibrium?

A system is at an equilibrium when all of its external forces are in balance.

Generally, In any acid-base reaction, the equilibrium will favor that side of reaction which moves the proton towards the stronger base.

Let us consider the given reaction

HCl (acid)  +  NaOH (strong base)   NaCl  +  H20

As per the reaction, equilibrium will shift towards the left side as it involves the abstraction of the proton by the base.

Hence, the answer is option 1 first which means the position of equilibrium lies far to right.

To learn more about the Equilibrium concept Check the given link

https://brainly.com/question/517289

#SPJ9

The change in enthalpy of the gas mixture during the reaction is - 95 kj.

The formula for the change in internal energy is given by:

ΔU = ΔH + W

ΔU = the change in inter energy = -181 kj ( decreased)

ΔH = the change in enthalpy

W = work done =  -86 kj

substituting the values in the formula we get :

ΔU = ΔH + W

- 181 kj = ΔH  - 86 kj

ΔH = -181 kj + 86  kj

ΔH = - 95 kj

Measurements show that the energy of a mixture of gaseous reactants decreases by 181.kj during a certain chemical reaction, which is carried out at a constant pressure. Furthermore, by carefully monitoring the volume change it is determined that -86.kj of work is done on the mixture during the reaction. The change in enthalpy of the gas mixture during the reaction is - 95 kj.

To learn more about change in enthalpy here

https://brainly.com/question/2396166

#SPJ1

Answer:A

Explanation:because i did the test

Component Q is more powerful in explaining a scientific phenomenon because peer conformation and support are characteristics of a theory.

Scientific phenomena are events that can be witnessed in the natural and artificial worlds that make people wonder and pose questions. A theory is a logical interpretation or explanation of a phenomenon or set of occurrences. For instance, the theory of evolution through natural selection is a hypothesis because it explains the variety of life on earth.

In addition to offering accurate explanations or interpretations, theories also serve additional objectives. Here, we examine three additional goals of theories: the organizing of well-understood phenomena, the forecasting of outcomes in novel circumstances, and the development of fresh lines of inquiry.

To know more about theories, refer to the following link:

https://brainly.com/question/6281498

#SPJ9

This alkyl halide can be prepared by electrophilic addition of HBr to 2 different alkenes because of alkenes undergo hydrogenation in presence of acid and base when HBr can added to the different alkyl 3-methyl-hex-2-ene, 3-methyl-hex-3-ene and 3-methylene hexane

Hydrogenation is the chemical reaction in which molecular hydrogen and another compound and element usually in presence of catalyst such as nickel, palladium or platinum and this process is commonly employed to reduce or saturated organic compound

Addition of hydrogen and halogen to the double bond or triple bond based on markovnikov rule of addition and when HBr is added to CH3- CH=CH2 then Br is added to CH group and H is added to the CH₂ group of the alkene and if the reaction is carried in the presence of any peroxide then reverse addition is taking place

Then different alkyl structure such as 3-methyl-hex-2-ene, 3-methyl-hex-3-ene and 3-methylene hexane and image is given below

Know more about electrophilic addition

https://brainly.com/question/25358492

#SPJ1

1) Check if the chemical reaction is balanced.

2) Moles of NaOH in the reaction.

3) Moles of neutralized acid.

4) Molarity of H2SO4

The pH of a solution that is 0.67 M in sodium fluoride and 0.43 M in hydrofluoric acid is 8.53

The pH of a solution is the negative logarithm of the hydrogen ion concentration of the solution.

Mathematically:

The pH of the given solution is calculated as follows:

Ka of HF = 7.2 * 10⁻⁴

Also, Kw = Ka * Kb

Kw = 1.0 * 10⁻¹⁴

Kb = 1.0 * 10⁻¹⁴ / 7.2 * 10⁻⁴

Kb = 1.39 x 10⁻¹¹

The [OH¯] is calculated using the Kb expression:

Kb = [OH⁻] * [H⁺] / [HA}

[OH⁻] = [H⁺] = x

Kb = x² / (0.83 - x)

Assuming x is negligible, the denominator = 0.83

x = √(1.39 x 10⁻¹¹ * 0.83)

x = 3.39 * 10⁻⁶

pOH = -log (3.39 * 10⁻⁶)

pOH = 5.47

pH = 14 - 5.47

pH = 8.53

Learn more about pH at: brainly.com/question/172153

#SPJ1

Every substance has a specific temperature range at which it changes from one phase (solid, liquid, or gas) to another.

Measure the melting, boiling, and/or sublimation points of several substances using a realistic melting point device to see what these phase changes appear like on a tiny scale.

Make assumptions about the relative potency of the forces binding these compounds together based on the transition points.

By placing a small amount of an organic solid into a capillary tube, attaching it to the thermometer's stem in the centre of a heating bath, and gradually heating the bath, one can ascertain the temperature at which melting starts and ends.

To know  more about melting point refer to the given link :

https://brainly.com/question/14267579?referrer=searchResults

#SPJ9

The advise which would be given to the engineers is for them to determine the limiting reactant so water will not be in excess.

This is referred to as the reactant which is completely used up in a chemical reaction and it helps to determine when the reaction stops. In this scenario, either water, lemon juice or sugar is a limiting reactant.

The best option in this scenario is to tell the engineers to determine the limiting reactant so  as to ensure that the quality of lemonade made is maximized and is therefore the right choice.

Read more about Limiting reagent here https://brainly.com/question/26905271

#SPJ1

You can see that NO₂⁻ has an oxidation number of -1 and V³⁺ has an oxidation number of +3.

When we state the chemical formula of these compounds, we need to have that the algebraic sum of the oxidation numbers must be zero. In this case, we have that the sum is -1 + 3 = 2, it is incorrect because we need to have the result of zero.

For this problem, we can multiply three times NO₂⁻ obtaining that the oxidation number is -3, so the algebraic sum would be: (-1)(3) + 3 = -3 + 3 = 0. This means that the chemical formula will have three times NO₂⁻ bonded with V³⁺ and it would be:

The atomic radius of boron atom is 0.09nm

What is an atomic radius?

Atomic radius, also known as atomic radii, is the total distance between an atom's nucleus and its electron's outermost orbital.

Atomic radius is thus defined as: The  distance from the nucleus's center to the edge of its surrounding electron shells.

The radius of an atom is comparable to a circle's radius. The electron's most distant orbital is likened to the circle's outside edge, and the nucleus to the circle's center. The position of the outermost electron is unclear, making it challenging to calculate the atomic radii.

According to the question,

1m = 10-9nm

So, 9*10-11m = 0.09nm

The atomic radius of boron atom is 0.09nm

To learn more about Atomic radius from the given link

https://brainly.com/question/15255548

#SPJ10

Potassium oxide is an ionic compound formed by combining potassium and oxygen. It carries the chemical formula K2O.

So, this is expected product from the reaction of potassium with oxygen because of the following:

To get the net charge of the compound equal to zero, we need to satisfy the equation K2O. So that's the answer.

The enthalpy of formation (ΔH°) of the given chemical reaction is equal to -905.3 KJ/mol.

The standard enthalpy of formation is defined as the change in enthalpy when one mole of a substance is formed from its pure elements under the standard state (1 atm of pressure and 298.15 K).

The standard enthalpy of formation is the energy released or absorbed when one mole of a substance is formed from its constituents under standard conditions. The symbol of the standard enthalpy of formation is represented by  [tex]\triangle {H^o_f}[/tex].

The equation for the standard enthalpy change of formation  for a balanced chemical reaction is shown below,

ΔH° (reaction)  =  ∑ [ΔH° of (products)− ∑ ΔH° of (Reactants)]

The standard enthalpy of the formation of fluorine gas = 0

The standard enthalpy of the formation of iodine gas = 62.23 KJ/mol

The standard enthalpy of the formation of IF₅ = -843 KJ/mol

ΔH° (reaction)  = - 843 - 62.23 = - 905 .3 KJ/mol

Therefore, the enthalpy of formation (ΔH°) of the given chemical reaction is -905.3 KJ/mol.

Learn more about enthalpy of formation, here:

https://brainly.com/question/28302300

#SPJ1

Answer:

Species. A population is a group of plants or animals of the same species that live in an area.

Answer:B

Explanation:

The mass in grams of the 254 mL of the liquid, given that it has a density of 1.24 g/cm³ is 314.96 grams

We'll begin by listing the out the parameters obtained from the question. This is given below:

The mass of the liquid can be obtained as follow:

Density = mass / volume

Cross multiply

Mass = Density × Volume

Mass of liquid = 1.24 × 254

Mass of liquid = 314.96 grams

Thus, the mass of the liquid is 314.96 grams

Learn more about mass and density:

https://brainly.com/question/13799762

#SPJ1

Answer:

6 N to the left, or -6 N
unbalanced

Explanation:

The forces are two 3 N forces. The forces are additive, so 3+3 = 6, so the answer is 6 N to the left.
Since the net force isn't 0, the forces are unbalanced (aka the block will move since there is a force pushing the block)

Answer:

The student changed too many variables.

Scientific notation is the way that scientists handle large numbers and small numbers. For example, instead of writing 0.000 000 0056, they write 5.6 × 10⁻⁹.

We can think of 5.6 × 10⁻⁹ as the product of two numbers: 5.6 (the digits) and 10⁻⁹ (the power of 10).

Here are some examples of scientific notation.

1000 = 1 × 10³; 7354 = 7.354 × 10³

100 = 1 × 10²; 482 = 4.82 × 10²

10 = 1 × 10¹; 89 = 8.9 × 10¹

1 = 1 × 10⁰; 6 = 6 × 10⁰

1/10 = 0.1 = 1 × 10⁻¹; 0.32 = 3.2 × 10⁻¹

1/100 = 0.01 = 1 × 10⁻²; 0.053 = 5.3 × 10⁻²

1/1000 = 0.001 = 1 × 10⁻³; 0.0078 = 7.8 × 10⁻³

The exponent of 10 is the number of places we must shift the decimal point to get the scientific notation.

Each place the decimal moves to the left increases the exponent by 1.

Each place the decimal point moves to the right decreases the exponent by 1.

EXAMPLE:

Write the following numbers in scientific notation: 1001;

6 926 300 000; -392; 0.000 000 13; -0.0038

Solution:

1.001 × 10³; 6.9263 × 10⁹; -3.92 × 10²; 1.3 × 10⁻⁷; -3.8 × 10⁻³

Hope this helps!

Combination. Option E is correct.

Given the chemical reaction between carbon and oxygen expressed as:

From the equation, you can see that carbn combines with oxygen atom to produce carbonmonoxide. This type of reaction is known as the combination reaction since it involves the reaction of two elements to produce a compound (carbon monoxide)

Based on the explanations above, we can concude that the reaction of carbon with oxygen to produce carbon monoxide is an example of a combination reaction.

Answer

Explanation

Note that a mole of any substance has 6.02 x 10²³ atoms of that substance.

Let x represent the mole of magnesium present in 5.01 x 10²² atoms of magnesium.

Therefore,

Cross multiply, and divide both sides by 6.02 x 10²³ atoms to get x

Answer:

Moles of Ca3(PO4)2 = 0.455 M * 0.125 L = 0.0569 mol

1 Mole of Ca3(PO4)2 = 3 moles of Ca2+ ions

Thus, moles of Ca2+ ion = 3 * 0.0569 = 0.1707 ~ 0.171 moles

The number of moles of ions in a solution can be calculated using the molarity and volume of the solution. The number of moles of Ca ²⁺ ions contained in 0.125 L of 0.455 M solution of Ca₃ (PO₄) ₂ is 0.0170 moles.

Molarity is a term used to represent the concentration of the solution. Mathematically it is the ratio of number of moles of solute to the volume of solution in liters.

The molarity of the calcium phosphate solution is given 0.455 M  and its volume is 0.125 L. Thus, the no.of moles of calcium phosphate in the solution is calculated as follows:

no.of moles of Ca₃ (PO₄) ₂  = molarity × volume

                                             = 0.455 M  × 0.125 L

                                             = 0.0568 moles.

It is clear from the formula that one mole of calcium phosphate contains 3 moles of Ca ²⁺ ions. Therefore,  the number of moles of calcium ions in 0.0568 moles of calcium phosphate is calculated as follows:

No. of moles of Ca ²⁺ ions  = 0.0568 × 3

                                            = 0.0170 moles.

Hence the number if moles of calcium ions in 0.125 L of 0.455 M calcium phosphate is 0.0170 moles.

To find more about molarity, refer the link below:

https://brainly.com/question/2817451

#SPJ2

Answer:

Copper(I) bromide

Explanation:

Copper has oxidation numbers of +1 or +2

Bromide has a common charge of -1

This can be called Copper I bromide more precisely .or somewhat redudanately Copper mono bromide.

An older form of naming would be Cupous Bromide. Indicating a +1 charge on Copper. Cupric Bromide would be CuBr2 indicating a + 2 charge.

The sinking of the ocean crust back into the mantle when it meets continental crust is referred to as subduction , and this process occurs at the ocean trenches.

This is referred to as a geological process which occurs when there is collision between two tectonic plates in the earth in which one of the plate sinks into the mantle underneath the other plate.

During this process of subduction, the ocean crust sinks back into the mantle when it meets continental crust and it occurs mainly at the ocean trenches thereby making the options provided the correct choice.

Read more about Subduction here https://brainly.com/question/32715

#SPJ1

• According to the balanced equation, we have :

4 Fe(s) + 3 O2(g) → 2 Fe2O3(s)

4 x 55.85g of Fe reacts with 3 x 32g of Oxygen

Given 17.86 g of Ion, we want to find out how much oxygen will be required in this instance .

• So :

M.mass Fe: 4* 55.85 = 223.4

M.mass O2 : 3* 32 = 96

we can rearrange by :

223.4 → 96

17.86 → x .....(cross multiply )

223.4x = 96* 17.86

x = (96 *17.86) / 234.4

x = 7.314

• Therefore mass of oxygen required = 7.3g ,



Answer

a. Increasing the air pressure on the solution.

Explanation

Answer:

E, C, A, 90, 5, D, B, D, D, D and B, A C and E, A, E

Explanation:

1. is correct, it is E
2. is C, not D. D is when the liquid is freezing/when the solid is melting.
3. the answer is A. B is when the gas is condensing or when the liquid is boiling.
4. 90 temperature units. This is the boiling point. Technically the substance can still condense below this point until 5 temperature units, or D, but ignore that.
5. 5 temperature units.
6. D, this is where the solid and liquids exchange states (ie melting/freezing)
7. B, this is where boiling and condensing occurs
8. Crystallisation is a fancy word for freezing. The melting and freezing points are the same, so D
9. D. Fusion means freezing.
10. D and B.
11. A, C, and E
12. A has the highest temperature and the highest kinetic and potential energy
13. E has the lowest kinetic and potential energy