In essence, there is no chemical reaction between ammonia and water. Although it is frequently said to produce NH₄OH, the overall response is:
H₂O + NH₃ = NH₄⁺ + OH⁻
You might compare the acid strength of H₂O (pka 15.7) and NH4⁺ (pka 9.24) or the base strength of NH₃ and OH⁻ to see which way the reaction would proceed. The reaction would shift to the weaker acid (H₂O) or the weak base in either case (NH₃). Despite what the bottle claims, weak doesn't make strong. I mean, there might be a small amount of NH₄⁺ and OH⁻ in the air, but not much.
The iron (III) ion forms an insoluble hydroxide and precipitates out of solution when ammonia is added to the solution.
To know more about reaction of ammonia, please refer:
https://brainly.com/question/9432528
#SPJ1
Why is an indicator used in a titration?To help reactants react successfully.To bind to the acid to form products.To show when the reaction has reached or past the equivalence point.To provide a surface for the reaction to occur.
Explanation:
The use of pH indicators in the titration process is useful to determine the end point of the titration, indicating that the entire sample is reacted.
Answer: To show when the reaction has reached or past the equivalence point.
The heat of vaporization of water is 540 calories per gram. Based on your calculations in
question 13, how many calories would be required to raise the same mass of water and
convert it from water liquid (95 0C) to water gas (1000C)?
Show your work for partial credit.
Step 1: Water raises from 95°C to 1000C
To convert 100.0 g of water at 20.0 °C to steam at 100.0 °C requires 259.5 kJ of energy.
For this problem, there are only two heats to consider:
q
1
= heat required to warm the water from 20.0 °C to 100.0 °C.
q
2
= heat required to vapourize the water to steam at 100 °C.
q
1
=
m
c
Δ
T
=
100.0 g × 4.184 J
∘
C
−
1
g
−
1
×
80.0
∘
C
=
33 472 J
q
2
=
m
Δ
H
vap
=
100.0 g × 2260 J⋅g
−
1
=
226 000 J
q
1
+
q
2
=
( 33 472 + 226 000) J = 259 472 J = 259.5 kJ
(4 significant figures)
What is a nonrenewable resource?
Non-renewable resources are resources found by humans as a source of energy and such resources cannot be replenished. Therefore, such resources should not be wasted.
Nature is the epitome of beauty and grace but as humans grow up they forget the shining and uplifting virtues. People should use resources responsibly. Non-renewable resources come from the earth. The supply is finite and could take billions of years to replenish.
In the past, many non-renewable energies were relatively cheap to generate. However, as supplies continue to dwindle the cost of this extraction is likely to increase, prompting customers to turn to alternative power sources such as solar and wind. The most common examples of natural resources include crude oil coal uranium and mineral resources such as gold. A subset of non-renewable resources includes crude oil and natural gas. Both substances are made of organic carbon materials and change shape over time after being heated and compressed.
Learn more about Non-renewable resources here:-https://brainly.com/question/14432353
#SPJ1
PLEASE HELP!
In a monomolecular reaction A->B , at t =250C, the initial concentration decrease at 25% in t =52 min. Calculate:
a) the constant rate;
b) the time after the initial concentration decrease with 75%;
c) the initial reaction rate, if the initial concentration of the reactant is 2.5 mol/L·s.
1) The rate at which this reaction occurs is obtained as 9.22 * 10^-5 s-1
2) The time that the reaction takes is obtained as 15033 s
3) The initial reaction rate is 9.22 * 10^-5 M
Can we find the rate of reaction?To obtain the rate of reaction is to find the rate at which the reactants move on to become products.
In this case there is reduction of the amount by 25% in 52 min.
Hence;
Initial concentration [A]o = [A]oFinal concentration = [A]o - 0.25 [A]o = 0.75 [A]oTime taken = 52 min or 3120 sUsing the approach of first order kinetics;
ln[A] = -kt + ln[A]0
k = -(ln[A] - ln[A]0)/t
k = - (ln0.75 [A]o/A]0)/3120
k = 9.22 * 10^-5 s-1
b) It was given in the question that;
[A] = [A]o - 0.75 [A]o = 0.25 [A]o
ln[A] = -kt + ln[A]0
t = -(ln[A] - ln[A]0)/k
t = - (ln0.25 [A]o/A]0)/9.22 * 10^-5
t = 15033 s
c) When the initial rate is is 2.5 mol/L·s
k = - (ln0.25 (2.5)/ln(2.5))/15033
k = 9.22 * 10^-5 M
Learn more about rate of reaction:brainly.com/question/8592296
#SPJ1
A marine biologist is preparing a deep-sea submersible for a dive. The sub stores breathing air under high pressure in a spherical air tank that measures 75.0cm wide. The biologist estimates she will need 3700.L of air for the dive. Calculate the pressure to which this volume of air must be compressed in order to fit into the air tank.
The pressure inside a tank with a volume can be calculated using Boyle's law. The pressure needed to compress gas of 3700 L is 16.75 atm.
What is Boyle's law.According to Boyle's law the pressure of a system is inversely proportional to its volume. The mathematical expression for a system with pressure Pa and volume V1 with its final pressure and volume P2 and V2 is written as follows:
P1V1 = P2V2.
The volume of the gas is 3700 L. Assume that it is measured in the atmospheric pressure 1 atm. The width of the spherical tank is 75 cm thus its radius is 37.5 cm.
Volume of the sphere = 4/3 πr³
= 4/3 × 3.14 × (37.5)³
= 220781 cm³ = 220.78 L.
Now the law can be applied as follows:
3700 L × 1 atm = 220.78 L × P2
P2 = 3700 / 220.78
= 16.75 atm.
Hence, the pressure needed to fill the air is 16.75 atm.
To find more about Boyle's law, refer the link below:
https://brainly.com/question/1437490
#SPJ1
5.Which of the following statements is true of the particles found in gas?Select one:a. They are closely spaced and not very energetic.b. They are closely spaced and very energetic.c. They are far apart and not energetic.d. They are very far apart and very energetic.
Answer
d. They are very far apart and very energetic.
Explanation
The particles in the solid are touching with very little space between them. The particles in a liquid usually are still touching but there are some spaces between them. The gas particles have big distances between them.
Gas particles are in constant rapid motion in random directions. The fast motion of gas particles gives them a relatively large amount of kinetic energy.
What is the volume of a 10% m/v aqueous solution that contains 37.8g of HN03?
378mL is the volume of a 10% m/v aqueous solution that contains 37.8g of HN03
What is an aqueous solution?
A solution in which the solvent is water is referred to as an aqueous solution. By adding (aq) to the appropriate chemical formula, it is typically shown in chemical equations. For instance, Na+(aq) + Cl would be used to represent a table salt solution (also known as sodium chloride, or NaCl) in water (aq).
The word aqueous, which derives from the Latin word aqua, means being or consisting of water. Water is a common solvent in chemistry because it works great as a solvent and is also readily available. In experiments, water is frequently used as the solvent; therefore, unless otherwise specified, the term "solution" refers to an aqueous solution.
The mass of HNO3 = 37.8g
The mass is 10% m/v of the solution which implies
10/100 = mass/ volume
Volume = 10mass
Volume = 10(37.8g)
Volume = 378mL
Thus, 378mL is the volume of a 10% m/v aqueous solution that contains 37.8g of HN03
Learn more about aqueous solution
https://brainly.com/question/19587902
#SPJ9
18. If a compound has 6 carbons, 12 hydrogens, and 1 oxygen, what is its chemical formula?
a. C6H12OH
b. CsH6O12 120g as Josqmos as ed of slunnal
c. C6H₁1OH
d. 8C12HO
e. C7H12O3
Carbon, hydrogen, and oxygen are the main components. Glucose has the chemical formula C6H12O6. This indicates that there are six carbon atoms in each glucose molecule.
What is the name of a 6 carbon ring?
Image for number 18 What is the chemical formula of a molecule with 6 carbons, 12 hydrogens, and 1 oxygen? CsH6O12 120g as Josqmos as ed of slunnal; C6H12OH; and C6H11OH, 8C12HO, C7H12O3, and
Aromatic rings are hydrocarbons that contain benzene or another comparable ring structure. They are sometimes referred to as aromatic compounds or arenes. The chemical symbol for benzene, C6H6, is frequently represented as a ring of six carbon atoms with alternate double and single bonds: There are a few issues with this straightforward image, though.
To learn more about carbon compounds refer to:
https://brainly.com/question/141693
#SPJ13
what is the molality of a solution contain 82.6g of butane dissolved in 0.500kg of hexane
Considering the definition of molality, the molality of a solution that contain 82.6g of butane dissolved in 0.500kg of hexane is 2.84 moles/kg.
Definition of molalityMolality is a measure of chemical concentration that indicates the amount of a substance dissolved in a given mass of solvent.
In other words, molality is the number of moles of solute that are dissolved in 1 kilogram of solvent.
The Molality of a solution is determined by the expression:
molality= number of moles of solute÷ kilograms of solvent
Molality is expressed in units moles/kg.
Molality in this caseIn this case, you know:
Mass of butane= 82.6 gramsMass molar of butane= 58 g/moleNumber of moles= Mass of butane÷ Mass molar of butane= 1.42 molesKilograms of solvent= 0.500 kgReplacing in the definition of molality:
molality= 1.42 moles÷ 0.500 kg
Solving:
molality= 2.84 moles/kg
Finally, the molality of the solution is 2.84 moles/kg.
Learn more about molality:
brainly.com/question/20366625
brainly.com/question/4580605
#SPJ1
HELP DUE TOMORROWWWW ILL GIVE BRAINLIEST
Answer:
Thermal energy refers to the energy contained within a system that is responsible for its temperature. Heat is the flow of thermal energy. A whole branch of physics, thermodynamics, deals with how heat is transferred between different systems and how work is done in the process (see the 1ˢᵗ law of thermodynamics).
Thermodynamics, and many other related fields, phase transitions are the physical processes of transition between a state of a medium, identified by some parameters, and another one, with different values of the parameters.
Which compound is a carbohydrate? (1 point)
O HCIO4
O Na₂C₂04
O C4H12N2
O C3H6O3
Answer:
it's the last one
Answer:
C3H6O3
Explanation:
It is one of the simplest molecules to compare against other molecules, such as sugars and amino acids.
1s² 2s²2p6 is the electron configuration of
The electron configuration 1s² 2s²2p6 is the element Neon.
Which four different electron configurations are there?One orbital may house a maximum of two electrons, and there are four different types of orbitals (s, p, d, and f). More electrons can be held in the p, d, and f orbitals since they contain various sublevels. As was said, each element's location on the periodic table determines the specific electron configuration of that element.
The octet rule states that an atom's outermost shell may hold no more than 8 electrons (except K shell which can accommodate maximum 2 electrons). Hence, potassium's electrical structure.
The quantity of valance electrons, which take part in the creation of a chemical bond, is found in an atom's outermost shell. The outermost shell of the atom's electrical structure contains 4 valance electrons.
To know more about Electron configuration visit:
https://brainly.com/question/13497372
#SPJ13
consider the reaction 2clf3+2nh3=n2+6hf+cl2 calculate hf for clf3 .
H=-1196 kJ
The heat of formation of the chlorine tri fluorde is -1513 kJ.
What is the enthalpy?The enthalpy refers to the heat that is absorbed or emitted in a reaction. We know that if the heat is absorbed the enthalpy of the reaction is positive but if heat is evolved, the enthalpy of the reaction is negative.
Now we can find the heat of the formation of chlorine tri fluoride a follows;
We have to use the formula;
Sum of enthalpy of formation of products - Sum of enthalpy of formation of reactants
-1196 =(0 + 271 + 0) - (x + (- 46))
-1196 = 271 - x + 46
-1196 = 317 - x
x = -1196 - 317
x = -1513 kJ
Learn more about enthalpy:https://brainly.com/question/13996238
#SPJ1
Missing parts;
Consider the reaction 2ClF3 (g) + 2NH3 (g) → 6HF (g) + N2 (g) + Cl2 (g) △H-_1196 kJ Given the following enthalpies of formation, calculate AHf for CIF3 (9) NH3 (g)- 46 kJ/mol HF 9)271 kJ/mol kJ
A 25.0 mL solution of HBr is neutralized with 13.7 mL of 0.230 M Ba(OH)₂. What is the concentration of the original HBr solution?
The concentration of the original HBr solution that has 25.0 mL solution neutralized with 13.7 mL of 0.230 M Ba(OH)₂ is 0.126M.
How to calculate concentration?Molarity is the concentration of a substance in solution, expressed as the number moles of solute per litre of solution.
Molarity can be calculated by using the following formula;
C₁V₁ = C₂V₂
Where;
C₁ = initial concentrationV₁ = initial volumeC₂ = final concentrationV₂ = final volumeAccording to this question, 25.0 mL solution of HBr is neutralized with 13.7 mL of 0.230 M Ba(OH)₂. The original concentration can be calculated as follows:
25 × x = 0.230 × 13.7
25x = 3.151
x = 0.126M
Therefore, 0.126M is the concentration of HBr solution.
Learn more about concentration at: https://brainly.com/question/16727614
#SPJ1
Why are elements on the periodic table not arranged by mass
Periodic table give us a chart where we can see the elements in the increasing order of atomic number because of the repetition of the properties of the elements
What is Periodic table?Periodic table is a table in which we find elements with properties like metals, non metals, metalloids and radioactive element arranges in increasing atomic number.
Arrangements of element is done on the basis of atomic number not on the basis of mass number because on arranging on the basis of atomic number the properties of elements gets repeat due to the arrangement of electron around the nucleus.
Thus periodic table is arranged on the basis or atomic number not on the basis of mass number due to repetition of properties
Learn more about periodic table, here:
https://brainly.com/question/11155928
#SPJ1
Question 22 of 29 Which of the following reactions is an acid-base reaction? A) AgNO3(aq) + KF(aq) →→ AgF(s) + KNO3(aq) B) NH3(aq) + HF(aq) → NH4*(aq) + F(aq) C) NO₂ (aq) + Al(s) → NH3(g) + AIO₂ (aq) D) CH4(g) + 2O₂(g) → 2H₂O(g) + CO₂(g)
Answer:
good question but very hard
An acid-base reaction is a chemical reaction which takes place between an acid and a base. An example of acid-base reaction is AgNO₃(aq) + KF(aq) → AgF(s) + KNO₃(aq). Thus, the correct option is A.
What are acid-base reactions?An acid–base reaction is a chemical reaction which occurs between an acid and a base. This reaction can be used to determine the pH through the method of titration.
This reaction is a type of chemical reaction which involves the exchange of one or more hydrogen ions or protons (H⁺) between the two species which may be neutral (such as water, H₂O) or electrically charged species (ions such as ammonium, NH⁴⁺ and hydroxide, OH⁻; or carbonate, CO₃²⁻).
An example of acid-base reaction is AgNO₃(aq) + KF(aq) → AgF(s) + KNO₃(aq).
Therefore, the correct option is A.
Learn more about Acid-base reactions here:
https://brainly.com/question/15220646
#SPJ2
Helppppppppppppppppppp
Answer:
See my photo. I promise it's right.
Marine science table 20-2
The distance between two consecutive crests or troughs of a wave, particularly in the case of electromagnetic or sound waves, is known as its wavelength.
The wavelength (in nanometers) or frequency of light is used to quantify it (in Hertz). Like with radio waves, they can also be as long as centimetres or metres. It is represented by and inversely proportional to wave frequency.
What distinguishes frequency from wavelength?
Frequency and wavelength are intimately related, particularly in the context of light. Frequency is determined by the number of waves that pass through a single place over a particular period of time, whereas wavelength is the distance between two successive troughs or crests.
The crest of a wave is the part of transverse waves that are above the mean level. The wave's trough is the region of transverse waves that lies below the mean level. The distance between two succeeding crests or troughs is known as the wavelength.
To learn more about Wavelength, visit
https://brainly.com/question/10027082
#SPJ13
11. Which of the following is true at equilibrium?a.The reaction stopsb. The forward and reverse reactions occur at equal ratesC. The reactants have been used upd. The products have been used up
Explanation:
Equilibrium occurs in a reversible reaction. This occurs when in a reaction the products formed react to reproduce the reactants. So basically, the forward and reverse reaction occur at equal rates.
Answer:
The correct answer is B.
Balance the equation: __Rh + __O2 --> __Rh2O7
Answer:
[tex]4Rh+7O_2\text{ }\rightarrow2Rh_2O_7[/tex]Explanation:
Here, we want to balance the given chemical equation
We can start by balancing the oxygen atoms
We have 7 on the left and 2 on the right
To make a balance, we place 7 before the molecular oxygen on the left and 2 on the given oxide
That means we would be having 4 Rh on the left
To balance the Rh, we have to place 4 on the left side
Thus, we have the balanced equation as:
[tex]4Rh+7O_2\text{ }\rightarrow2Rh_2O_7[/tex]Question 5
2 Points
The composition of a mixture of potassium chlorate and potassium chloride is to be determined. A 9.47 gram sample of the mixture
is heated until the creation of oxygen gas stops. If the sample mass after heating is 7.11 grams, what is the percent by mass of
potassium chlorate in the mixture? Report your answer with 3 significant figures.
Add your answer
The percent by mass of potassium chlorate in the mixture is 62.46 %
Potassium chlorate is a compound containing potassium, chlorine and oxygen, with the molecular formulation KClO₃. In its natural form, it is a white crystalline substance. After sodium chlorate, it's far the second one maximum not unusual chlorate in commercial use.
Potassium chloride, also referred to as potassium salt, is used as a medicine to treat and prevent low blood potassium. Low blood potassium may also occur due to vomiting, diarrhea, or certain medications.
A aggregate is a material made of two or more extraordinary chemical materials which are not chemically bonded. A combination is the bodily aggregate of two or greater substances wherein the identities are retained and are combined in the shape of answers, suspensions and colloids
KClO₃ + KCl = 9.47 gram --------- sample before heating
KClO₃ + KCl = 7.11 gram ---------- sample mass after heating
mass of oxygen = 9.47 - 7.11 = 2.36 gram
Therefore mass of KClO₃ in an mixture is = 7.11/2 + 2.36
= 5.915 gram
Therefore, the percent by mass of potassium chlorate in the mixture = 5.915/9.47 × 100
= 62.46 %
Learn more about mixture here:-https://brainly.com/question/24869423
#SPJ9
How many ml. of pepsi are there in a 2.55 quart bottle of pepsi?
Step 1 - Converting ml and quart
As can be seen in the figure, the conversion factor is:
[tex]1000ml=1.057qt[/tex]Dividing both sides by 1.057:
[tex]946.07ml=1qt[/tex]Step 2 - Converting 2.55 quart to ml
Now that we know the conversion factor, we just have to multiply both sides by 2.55:
[tex]\begin{gathered} 2.55\times946.07ml=2.55\times1qt \\ \\ 2.55qt=2412.47ml \end{gathered}[/tex]There are thus 2412.47 ml in a 2.55 quart bottle pepsi.
How many grams of magnesium (Mg, 24.30g/mol) are in 7.43 x 1022 atoms of Mg?7.43x 1022 atoms Mg| 1 mole Mg 24.30 g Mg16.02x 1023 atoms Mg/ 1 mole Mg[?] grams Mg
To calculate this, we can use fractions for equivalent amounts.
So, we have the number of atoms, using the Avogadro's Constant, we know that 1 mol of Mg is approximately 6.02 x 10^23, so:
[tex]\frac{1\text{mol Mg}}{6.02\times10^{23}\text{atoms Mg}}=1[/tex]And since we have the number of atoms of Mg, we can convert to mol of Mg by multiplying by this fraction.
Now, from mol of Mg we can convert to mass using the molar mass of 24.30 g/mol. It says that 24.30 g og Mg is equivalent to 1 mol, so:
[tex]\frac{24.30\text{g Mg}}{1\text{mol Mg}}=1[/tex]So, we have:
[tex]7.43\times10^{22}\text{atom Mg}\cdot\frac{1\text{mol Mg}}{6.02\times10^{23}\text{atom Mg}}\cdot\frac{24.30\text{g Mg}}{1\text{mol Mg}}[/tex]Notice that this is presented in a table in the question, so we can now just multiply all of them:
[tex]7.43\times10^{22}\text{atom Mg}\cdot\frac{1\text{mol Mg}}{6.02\times10^{23}\text{atom Mg}}\cdot\frac{24.30\text{g Mg}}{1\text{mol Mg}}=\frac{7.43\times10^{22}\cdot24.30\text{g Mg}}{6.02\times10^{23}}=2.999\text{g Mg}\approx3.00\text{g Mg}[/tex]Thus, this is equivalent of approximately 3.00 g of Mg.
If the pH of an acid is 5.1, what is the concentration of the H+?
Answer
[H+] = 7.94x10^-6 M
Explanation
Given:
pH = 5.1
Required: The concentration of H+
Solution
pH = -log[H+]
5.1 = - log [H+]
[H+] = 10^-5.1
[H+] = 7.94x10^-6 M
1.
What causes convection currents to form in the ocean?
Differences in water density
Differences in water depths
Differences in water quality
2.
Which of the following is an example of heat transfer through convection?
Feeling heat from a campfire
smoke rising from a volcano
A metal spoon getting warm from being in hot water
3.
In which direction does heat always flow?
From a larger object to a smaller object
From a cooler object to a warmer object
From a smaller object to a larger object
From a warmer object to a cooler object
4.
Which of the following is the best description of convection?
Heat transfer between two objects that are touching
Heat transfer through movement in fluids
Heat transfer through empty space
80 points. 20 points each question.
1. Convection currents are caused by Differences in water density.
2. Feeling heat from a campfire is an example of heat transfer through convection.
3. Heat always flow from a warmer object to a cooler object.
4. The best description of convection is Heat transfer through movement in fluids.
Differential heating leads to convection currents. Warm, less dense, lighter material rises while cool, more dense, heavier material sinks. Convection currents are patterns of circulation that are produced by this movement in the Earth's mantle, oceans, and atmosphere.
The transfer of heat between two bodies by currents of moving gas or fluid is known as convective heat transfer. In free convection, air or water rises and is replaced by a cooler parcel of air or water as it moves away from the hot body.
Heat energy will always transfer from the warmer object to the cooler object under normal circumstances and in nature. Up until the two substances reach the same temperature, heat energy will transfer between them. The term "thermal equilibrium" describes this.
To learn more about heat transfer visit the link:
https://brainly.com/question/13433948?referrer=searchResults
#SPJ1
The x-ray has a frequency
of 1.4 x 1019 Hz. What is the
energy associated with one
x-ray? ►
The energy of the photon is 9.24 * 10^-15 J.
What is the energy?Let us recall that the energy has to do with the product of the frequency and the plank's constant. In thus case, we have the frequency of the photon and we have to find the energy of the photon and we have to do that from the following formula;
E = hf
E = energy of the photon
h = Plan's constant
f = frequency of the photon
Then;
E = 6.6 * 10^-34 Js * 1.4 x 10^19 Hz
E = 9.24 * 10^-15 J
Learn more about energy of a photon:https://brainly.com/question/11016364
#SPJ1
The substances that make it up keep their physical properties
Answer:
A mixture is a combination of two or more substances in any proportions. The substances in a mixture do not combine chemically, so they retain their physical properties. A homogeneous mixture has the same composition throughout.
A sample of gas with an initial volume of 28.4 L at a pressure of 724 mm Hg and a temperature of 303 K is compressed to a volume of 15.5 L and warmed to a temperature of 379 K. What is the final pressure of the gas?
To solve this question, we need to use the combined gas equation which is given as
[tex]\begin{gathered} \frac{P_1V_1}{T_1}=\frac{P_2V_2}{T_2} \\ p=\text{pressure} \\ v=\text{volume} \\ t=\text{temperature} \end{gathered}[/tex]Now we should write down the given data
[tex]\begin{gathered} v_1=28.4l \\ p_1=724\operatorname{mm}hg \\ T_1=303K \\ v_2=15.5L \\ T_2=379K \\ p_2=\text{ ?} \end{gathered}[/tex]So, we would use the previous equation i wrote down.
[tex]\begin{gathered} \frac{p_1v_1}{t_1}=\frac{p_2v_2}{t_2} \\ \frac{724\times28.4}{303}=\frac{p_2\times15.5}{379} \\ 67.8600=\frac{p_2\times15.5}{379} \\ 15.5p_2=67.86\times379 \\ 15.5p_2=25718.94 \\ \text{divide both sides by the coefficent of p2} \\ \frac{15.5p_2}{15.5}=\frac{25718.94}{15.5} \\ p_2=1659.28\operatorname{mm}hg \end{gathered}[/tex]From the calculations above, the final pressure of the gas is 1659.28mmHg
Which period 2 element would the 4th ionization energy be much larger than the 3rd ionization energy?
Period 2 element would the 4th ionization energy be much larger than the 3rd ionization energy is Boron.
Boron belongs to period second. atomic no. of boron is 5 and the electronic configuration is given as :
B₅ = 1s² 2s² 3p₁
The 1st ionization energy = 800.6
the 2nd ionization energy = 2427.1
the 3rd ionization energy = 3659.7
the 4th ionization energy = 25025.8
So. we can see that the 3rd ionization energy is much lower than 4th ionization energy because after removing the 3rd electron from 2s boron will attain the stable electronic configuration of helium. now to remove electron from filled orbital it will require much larger energy the 3rd ionization energy.
To more about ionization energy here
https://brainly.com/question/11266461
#SPJ1
Fictitious element Az has two common isotopes. What is the average atomic mass (in amu) of Az given that seven-ninth of the isotopes have a mass of 325.2 amu, while the rest have a mass of 329.6 amu? Report the answer to 4 significant figures.
The average atomic mass of the fictitious element Az is 326.2 amu
The average atomic mass (on occasion referred to as atomic weight) of an element is the weighted average mass of the atoms in an obviously going-on sample of the element. average masses are typically expressed in unified atomic mass gadgets.
The atomic mass of detail is the common mass of the atoms of an element measured in the atomic mass units (AMU, also called daltons, D). The atomic mass is a weighted average of all of the isotopes of that element, in which the mass of every isotope is improved via the abundance of that specific isotope.
The atomic mass is a median of an element's atomic hundreds, weighted via the herbal abundance of each isotope of that detail. it is a weighted common because exclusive isotopes have one-of-a-kind hundreds. An atomic mass unit is 1/12th of the mass of a 12C atom.
Average atomic mass = Σ % abundance × mass
= 325.2 × 7/9 + 329.6 × 2/9
= 252.93 + 73.24
= 326.17 amu
Learn more about average atomic mass here:-https://brainly.com/question/24186882
#SPJ1