You dissolve 14 g of Mg(NO3)2 in water and dilute to
750 mL. What is the molarity of this solution?

Answer:

the characteristics of ionic compounds are :

1.They form crystals.

2.They are hard and brittle.

Answer:

they form crystals.

they have high melting and boiling points.

they are hard and brittle.

they are good insulators.

when dissolve in water...they dissociate Into ions.

Answer:

something that can be maintained over a period of time

Answer:

a balance between meeting today's needs.......

Explanation:

Protons: charge: +1 // mass: 1 // location: nucleus

Neutrons: charge: 0// mass: 1 // location: nucleus

Electrons: charge: -1// mass: 0// location: orbitals

Answer: The number of milliliters of 654 mL for 0.587 M NaOH required to precipitate all of the [tex]Fe^{3+}[/tex] ions in 197 mL of 0.654 M [tex]FeCl_{3}[/tex] solution as [tex]Fe(OH)_{3}[/tex].

Explanation:

The reaction equation is as follows.

[tex]FeCl_{3}(aq) + 3NaOH(aq) \rightarrow Fe(OH)_{3}(s) + 3NaCl(aq)[/tex]

Therefore, moles of [tex]Fe(OH)_{3}[/tex] are calculated as follows.

Moles = Molarity of [tex]Fe(OH)_{3}[/tex]  [tex]\times[/tex] Volume (in L)

= 0.654 M [tex]\times[/tex] 0.197 L  

= 0.128 mol

Now, according to the given balanced equation 1 mole of [tex]FeCl_{3}(aq)[/tex] reacts with 3 moles of NaOH(aq). Hence, moles of [tex]Fe(OH)_{3}[/tex]  reacted are calculated as follows.

3 [tex]\times[/tex] 0.128 mol = 0.384 moles of NaOH

As moles of NaOH present are as follows.

Moles of NaOH = Molarity of NaOH [tex]\times[/tex] Volume (in L)

0.384 mol = 0.587 M [tex]\times[/tex] Volume (in L)

Volume (in L) = 0.654 L (1 L = 1000 mL) = 654 mL

Thus, we can conclude that the number of milliliters of 654 mL for 0.587 M NaOH required to precipitate all of the [tex]Fe^{3+}[/tex] ions in 197 mL of 0.654 M [tex]FeCl_{3}[/tex] solution as [tex]Fe(OH)_{3}[/tex].

Answer:

3.24 mol/L

Explanation:

Given that:

mass of Boron triiodide = 6664 grams

molar mass of BI_3 = 391.52 g/mol

Recall that:

number of moles = mass/molar mass

∴

number of moles = 6664 g /391.52 g/mol

number of moles = 17.02 mol

Also;

Molarity = moles for solute/liter for solution

= 17.02 mol/5.25 L

= 3.24 mol/L

Answer:

B

Explanation:

So, a pot of boliling is hot right? of course, since it is hot thermal energy will be transferred from one place to another. I don't know if this is correct but I just wanted to give it a try.

Answer:

F2 (g)

Explanation:

Edg 2021

Answer:

F2 g

Explanation:

Answer:

1.15 moles of excess reactant will remain after precipitation is complete.

Explanation:

The balanced reaction is:

2 AgNO₃ (aq) + Na₂SO₄ (aq) → Ag₂SO₄ (s) + 2 NaNO₃ (aq)

By reaction stoichiometry (that is, the relationship between the amount of reagents and products in a chemical reaction), the following amounts of moles of each compound participate in the reaction:

Then you can apply the following rule of three:: if by stoichiometry 2 moles of AgNO₃ reacts with 1 mole of Na₂SO₄, 3.80 moles of AgNO₃ reacts with how much moles of Na₂SO₄?

[tex]amount of moles of Na_{2}SO_{4} =\frac{1mole of Na_{2}SO_{4} * 3.80 moles of AgNO_{3} }{2 mols of AgNO_{3} }[/tex]

amount of moles of Na₂SO₄= 1.9 moles

But 3.05 moles of Na₂SO₄ are available. Since you have more moles than you need to react with 3.80 moles of AgNO₃, Na₂SO₄ will be the excess reagent.

To calculate the amount of excess reagent that will remain, you must make the difference between the amount you initially have and the amount that reacts:

3.05 moles - 1.9 moles= 1.15 moles

1.15 moles of excess reactant will remain after precipitation is complete.

Answer:

5 and the rest are all set to the same date on your list as the other one to get you a list on for a your special first year week and with a special holiday party holiday

Explanation:

Sorry desperate for points

Answer

the answer is p block

Answer:

false

Explanation:

energy does not return to the sun, it returns to the plants or producers. if energy were to return to the sun, it would have to travel though space.

Answer:

67.0 L

Explanation:

Step 1: Given data

Step 2: Calculate the volume occupied by 2.99 moles of C₃H₈ at STP

C₃H₈ is a gas. If we assume ideal behavior, 1 mole of C₃H₈ at STP occupies 22.4 L.

2.99 mol × 22.4 L/1 mol = 67.0 L

Answer:

Answer

9......

Explanation:

Explaination:

Answer:

True

Explanation:

Your welcome! :) Good luck!

Answer:

protons: positively charged, located in the nucleus

electrons: negatively charged, located outside the nucleus

neutrons: no charge, located in the nucleus

Answer:

46.67 g

Explanation:

From the question given above, the following data were obtained:

Change in temperature (ΔT) = 23.8 °C

Heat (Q) = 261 J

Specific heat capacity (C) of silver = 0.235 J/gºC

Mass of silver (M) =?

The mass of the sample of silver can be obtained as follow:

Q = MCΔT

261 = M × 0.235 × 23.8

261 = M × 5.593

Divide both side by 5.593

M = 261 / 5.593

M = 46.67 g

Thus, the mass of the sample of silver is 46.67 g

Answer:

b) warming up a) wavelength a) blank c) sample

Explanation:

To run a spectrophotometry experiment, begin by warming up the spectrophotometer and preparing the samples. It is important that the equipment is warmed up for at least 30 minutes before starting the measurements.

Be sure to select the correct wavelength, then run a measurement on the blank solution. The selected wavelength depends on the analyte of interest. The black solution contains the same matrix but it doesn´t contain the analyte.

Follow up by running measurements on sample solutions. Once data is collected, turn off the instrument, clean the area, and discard the samples. The samples are those of unknown concentration that we want to determine.

To run a spectrophotometry experiment, begin by cleaning the spectrophotometer and preparing the samples. Be sure to select the correct wavelength, then run a measurement on the sample solution. Follow up by running measurements on aqueous solutions. Once data is collected, turn off the instrument, clean the area, and discard the samples.

Spectrophotometry is a technique used to measure the interaction of light with matter, specifically the absorption, transmission, or reflection of light by a sample. It involves the use of a spectrophotometer, an instrument that measures the intensity of light as a function of its wavelength or frequency.

In spectrophotometry, a sample is exposed to light of a specific wavelength or a range of wavelengths. The sample may absorb certain wavelengths of light, which can be detected and measured by the spectrophotometer. The amount of light absorbed is related to the concentration of the analyte in the sample, allowing for quantitative analysis.

Learn more about Spectrophotometry, here:

https://brainly.com/question/30626061

#SPJ6

Answer:

14 mol e⁻

Explanation:

Step 1: Write the balanced half-reaction for the reduction of permanganate to manganese

8 H⁺(aq) + 7 e⁻ + MnO₄⁻(aq) ⇒ Mn(s) + 4 H₂O(l)

Step 2: Calculate the moles corresponding to 110 g of manganese

The molar mass of Mn is 55 g/mol.

110 g × 1 mol/55 g = 2 mol

Step 3: Calculate the number of moles of electrons needed to produce 2 moles of Mn

According to the half-reaction, 7 moles of electrons are required to produce 1 mole of Mn.

2 mol Mn × 7 mol e⁻/1 mol Mn = 14 mol e⁻

Answer:

[tex]V_{Na_2S}=368mL[/tex]

[tex]m_{Al_2S_3}=67.3gAl_2S_3[/tex]

Explanation:

Hello there!

In this case, according to the given information, it is possible to realize that the only way for us to calculate the required volume of sodium sulfide, is by calculating the moles of this substance consumed 163 mL of 2.75 mol/L aluminum sulfate by using the definition of molar concentration and the 1:3 mole ratio between these two:

[tex]n_{Na_2S}=0.163L*2.75\frac{molAl_2(SO_4)_3}{L}*\frac{3molNa_2S}{1molAl_2(SO_4)_3} =1.34molNa_2S[/tex]

Now, we divide these moles by the molar concentration of sodium sulfide to obtain the required volume:

[tex]V_{Na_2S}=\frac{1.34molNa_2S}{3.65mol/L} =0.368L=368mL[/tex]

For the last part, we now use the 1:1 mole ratio of aluminum sulfate to aluminum sulfide and the molar mass of the latter (150.158 g/mol) in order to calculate the required mass:

[tex]m_{Al_2S_3}=0.163L*2.75\frac{molAl_2(SO_4)_3}{L}*\frac{1molAl_2S_3}{1molAl_2(SO_4)_3} *\frac{150.158gAl_2S_3}{1molAl_2S_3} \\\\m_{Al_2S_3}=67.3gAl_2S_3[/tex]

Regards!

Answer:

For gases such as hydrogen, oxygen, nitrogen, helium, or neon, deviations from the ideal gas law are less than 0.1 percent at room temperature and atmospheric pressure. Other gases, such as carbon dioxide or ammonia, have stronger intermolecular forces and consequently greater deviation from ideality.

Explanation:

Answer:

Correct answer would be Option 2, Chemical Energy

Hope this helps!

Answer:

0.016 M

Explanation:

Molarity refers to the molar concentration of a solution and it can be calculated using the formula below:

Molarity (M) = number of moles (n) ÷ volume (V)

According to this question, the mass of KCl was given to be 0.72 grams and the volume of water as 600 mL.

Using mole = mass/molar mass to convert mass of KCl to moles

Molar mass of KCl = 39 + 35.5 = 74.5g/mol

mole = 0.72g ÷ 74.5g/mol

mole = 0.00966mol

Volume of water = 600mL = 600/1000 = 0.600L

Molarity, M = 0.00966 ÷ 0.600

Molarity of KCl solution = 0.016 M

Answer:

Which language is this???

Explanation:

57.3ml

we use Charles's law

to solve the question

Answer:

[tex]\boxed {\boxed {\sf 225 \ mL}}[/tex]

Explanation:

The temperature and volume of the gas are changing, so we use Charles's Law. This states the temperature of a gas is directly proportional to the volume of a gas. The formula is:

[tex]\frac{V_1}{T_1}=\frac{V_2}{T_2}[/tex]

The original volume is unknown. The new volume is 75 milliliters.

The gas is cooled from 150 Kelvin to 50 Kelvin, so the original temperature is 150 K and the new temperature is 50 K.

We know that:

Substitute the values into the formula.

[tex]\frac {V_1}{150 \ K}=\frac{ 75 \ mL}{50 \ K}[/tex]

Since we are solving for the original volume, we must isolate the variable V₁.

It is being divided by 150 K. The inverse of division is multiplication, so we multiply both sides by 150 K.

[tex]150 \ K *\frac {V_1}{150 \ K}=\frac{ 75 \ mL}{50 \ K}* 150 \ K[/tex]

[tex]V_1=\frac{ 75 \ mL}{50 \ K}* 150 \ K[/tex]

The units of Kelvin (K) cancel.

[tex]V_1= \frac{ 75 \ mL}{50 }* 150[/tex]

[tex]V_1=1.5 * 150 \ mL[/tex]

[tex]V_1= 225 \ mL[/tex]

The original volume is 225 milliliters.

Answer:

Noble gases are a  set of elements in the periodic table because they don't naturally bond with other elements. *Examples ...Helium; Neon; Radon; Xenon; Argon etc

Explanation:

theyre noble gases.

Answer:

The molecular equations are:

1. CuSO₄ (aq) + 2 KOH (aq) ----> Cu(OH)₂ (s) + K₂SO₄ (aq)

2. Ba(NO₃)₂ (aq) + K₂SO₄ (aq) + BaSO₄ (s) + 2 KNO₃ (aq)

The complete ionic equations are:

1. Ag + (aq) + NO₃- (aq) + I- (aq) + Na (aq) ---> AgI (s) + No₃- (aq) + Na+ (aq)

2. Cu²+ + SO₄²- (aq) + 2 K+ (aq) + 2 OH- (aq) ---> Cu(OH)₂ (s) + 2K+ (aq) + SO₄²- (aq)

The net ionic equations are:

1. Ca²+ (aq) + SO₄²- (aq) ---> CaSO₄ (s)

2. Ba²+ (aq) +SO₄²- (aq) ---> BaSO₄ (s)

Explanation:

A molecular equation is a balanced chemical equation which shows the reacting species as molecules rather than as componenet ions in their compounds with subscripts written beside the molecules to indicate the state in which they occur in the chemical reaction.

An ionic equation expresses the reacting species as components ions in a chemical reation. All the ions and molecules reacting are shown.

In a net ionic equation, the ions which remain in the ionic state also known as spectator ions are not written as part of the equation.

From the given attachment;

The molecular equations are:

1. CuSO₄ (aq) + 2 KOH (aq) ----> Cu(OH)₂ (s) + K₂SO₄ (aq)

2. Ba(NO₃)₂ (aq) + K₂SO₄ (aq) + BaSO₄ (s) + 2 KNO₃ (aq)

The complete ionic equations are:

1. Ag + (aq) + NO₃- (aq) + I- (aq) + Na (aq) ---> AgI (s) + No₃- (aq) + Na+ (aq)

2. Cu²+ + SO₄²- (aq) + 2 K+ (aq) + 2 OH- (aq) ---> Cu(OH)₂ (s) + 2K+ (aq) + SO₄²- (aq)

The net ionic equations are:

1. Ca²+ (aq) + SO₄²- (aq) ---> CaSO₄ (s)

2. Ba²+ (aq) +SO₄²- (aq) ---> BaSO₄ (s)

Answer:

7505.19 J

Explanation:

We'll begin by calculating the change in the temperature of copper. This can be obtained as follow:

Initial temperature (T₁) = 20 °C

Final temperature (T₂) = 875 °C

Change in temperature (ΔT) =?

ΔT = T₂ – T₁

ΔT = 875 – 20

ΔT = 855 °C

Finally, we shall determine the heat required. This can be obtained as follow:

Specific heat capacity (C) = 0.385 J/gºC

Change in temperature (ΔT) = 855 °C

Mass (M) = 22.8 g

Heat (Q) required =?

Q = MCΔT

Q = 22.8 × 0.385 × 855

Q = 7505.19 J

Thus, 7505.19 J of heat energy is required.

Answer:

The electrons will be added by the hydrogen.

Explanation:

If we fire a single electron towards the hydrogen atom, the hydrogen atoms added the electron to its shell by applying force of attraction and becomes stable as well as non reactive in nature because the hydrogen attains the electronic configuration of helium which is a noble gas and have completed its outermost shell. The proton that is present in the nucleus attracts this electron and compel it to add in the electron.

Answer:

1st structure - Meso

2nd structure - Chiral

3rd structure - achiral

Explanation:

In the 1st structure there is nitrogen atom bonded with 4 different groups. It is Meso compound. In the second structure a carbon atom is attached with hydroxide molecule OH and has four different environment. It is Chiral compound. In the third structure no atom have different atom or group surrounding it. Therefore it is Achiral compound.

Answer:

Limiting reagent is Na

Explanation:

Reaction of Na with water is:

Na + H₂O →  NaOH  +  H₂

It is a very exothermic reaction.

The correctly balanced equation is:

2Na + 2H₂O →  2NaOH  +  H₂

Ratio is 2:2, between reactants, according to stoichiometry.

We convert mass to moles:

22 g . 1 mol / 23 g = 0.956 moles of Na

28 g . 1mol / 18 g = 1.56 moles of water.

Certainly the limiting reagent is sodium. For 1.56 moles, we need the same amount of sodium and we only have 0.956 moles.

We do not have enough sodium to complete the reaction.