if stretching a spring constant of

Answer:

200 km/hr

Explanation:

Since he goes 80km per hour, multiply this by 2.5 or two and a half hours.

80 x 2.5 = 200 km/hr.

Answer:

leader give enthusiasm and strength power to country they reflect to. be a successful and hyperbolic

Explanation:

leader is the main king of the country they reflect them to be honourable and be confident that is the way to get key on a typical African

Answer: mark me branliest plz

Explanation:

Two objects with masses 5. 4 meters per second in 20. 8 m/s? At the end of ... A -kilogram car travels at a constant speed of 20. 18 m/s . 8 m/s2). The acceleration due to ... 5 seconds. the maximum speed an object can travel falling towards earth. ... 1 (4) 7. 0 3 101 m 3. 19)An object is dropped and falls freely to the ground ...

Answer:

Foot

Explanation:

Big toes

Answer: current I= 2 A

Explanation: when resistors are in series current I is same

Through each resistor. Potential drop along resistor R is

ΔV= IR. then I = ΔV/R = 6V/3Ω

Three resistors: R1 = 5 Ω,R2 = 3 Ω, and R3 = 4 Ω are connected in series to each other. A voltmeter connected in parallel to resistor R2 measures a voltage of 6 Volts, then the current flowing through the battery would be 2 Ampere.

Resistance is the obstruction of electrons in an electrically conducting material.

As given in the problem ,Three resistors: R1 = 5 Ω,R2 = 3 Ω, and R3 = 4 Ω are connected in series to each other. A voltmeter connected in parallel to resistor R2 measures a voltage of 6 V.

By using Ohm's Law,

V = IR

6 Volt = Electric current × 3 Ohms

Electric current = 6 volt / 3 Ohm's

                          = 2 Ampere

Thus, the current flowing through the battery would be 2 Ampere.

To learn more about resistance here, refer to the link;

brainly.com/question/14547003

#SPJ2

Answer:

At dawn your location on earth is pointed straight in the direction of the Earth's travel in its orbit.  Between midnight and dawn you are moving head-on through the location of the meteors in space, which means that you will, on average, observe more of them.

- public.nrao.edu

Explanation:

hope this helps

Answer:

I would assume a force of gravitational pull.

Explanation:

Answer:  How powerful the pull is or how many magnetic things it can pick up at one time, or a heavy magnetic object.

Explanation:

Answer:

42

Explanation:

Multiply the difference by 8.4 to estimate the distance. ( kilometers )

P wave = 10

S wave = 15

Difference = 5

8.4 * 5 = 42

The initial wave (P wave) is less severe and moves faster, whereas the more damaging S wave moves slowly.

When an earthquake happens, it sends forth energy waves known as seismic waves. It's similar to the ripples that occur when a stone is thrown into water.

Here, There are two types of waves: P waves and S waves.

P waves travel faster and are formed first; they go in the exact opposite direction from where the earthquake occurs.

S waves, or secondary waves, on the other hand, are slower and travel in a perpendicular direction.

When these waves are generated in particular facilities, scientists can detect them.

The difference between time = 15 – 10 = 5

From the graph:

=8.4×5

= 42

Thus, the initial wave (P wave) is less severe and moves faster, whereas the more damaging S wave moves slowly.

Learn more about the seismic waves here:

https://brainly.com/question/13062627

#SPJ2

Answer:

B. heating.

Explanation:

Answer:

A. Cooling

Explanation:

Because when Lava cools down, it hardens and becomes a solid, and is less hotter.

I learned the equation as P•V=k•T .

So x=1, y=1, and z= -1 .

Answer:

Where are the answer choices?

Explanation:

Answer:

a)  F = 64.30 N,  b) θ = 121.4º

Explanation:

Forces are vector quantities so one of the best methods to add them is to decompose each force and add the components

let's use trigonometry

Force F1

          sin 170 = F_{1y} / F₁

          cos 170 = F₁ₓ / F₁

          F_{1y} = F₁ sin 170

          F₁ₓ = F₁ cos 170

          F_{1y} = 100 sin 170 = 17.36 N

          F₁ₓ = 100 cos 170 = -98.48 N

Force F2

          sin 30 = F_{2y} / F₂

          cos 30 = F₂ₓ / F₂

          F_{2y} = F₂ sin 30

          F₂ₓ = F₂ cos 30

          F_{2y} = 75 sin 30 = 37.5 N

          F₂ₓ = 75 cos 30 = 64.95 N

the resultant force is

X axis

          Fₓ = F₁ₓ + F₂ₓ

          Fₓ = -98.48 +64.95

          Fₓ = -33.53 N

Y axis

         F_y = F_{1y} + F_{2y}

         F_y = 17.36 + 37.5

         F_y = 54.86 N

a) the magnitude of the resultant vector

let's use Pythagoras' theorem

         F = Ra Fx ^ 2 + Fy²

         F = Ra 33.53² + 54.86²

         F = 64.30 N

b) the direction of the resultant

let's use trigonometry

        tan θ’= F_y / Fₓ

        θ'= [tex]tan^{-1} \frac{F_y}{F_x}[/tex]

        θ'= tan⁻¹ (54.86 / (33.53)

        θ’= 58.6º

this angle is in the second quadrant

The angle measured from the positive side of the x-axis is

        θ = 180 -θ'

        θ = 180- 58.6

        θ = 121.4º

Imagine you have three flashlights. One has a blue light, one has a green light and one is red. If you were to shine each of those lights in the same spot, I think i would see white color.

At one end of the electromagnetic wave line, which has the group of the visible spectrum. This has been referred to as the visible light of the spectrum. The visible light with the shortest of the wavelength has the blue light and the one with the longest has the red light.

The primary colors of the light has been the spectrum are red, blue, and green. The combination of these colors will form other as well as the colors which has been referred to as the secondary colors. The combination of the beam of the red light and the beam of green light will form yellow color.

Therefore, Imagine you have three flashlights. One has a blue light, one has a green light and one is red. If you were to shine each of those lights in the same spot, I think i would see white color.

Learn more about flashlights on:

https://brainly.com/question/25780677

#SPJ2

If the field is in a vacuum, the magnetic field is the dominant factor determining the motion. Since the magnetic force is perpendicular to the direction of travel, a charged particle follows a curved path in a magnetic field. The particle continues to follow this curved path until it forms a complete circle. Another way to look at this is that the magnetic force is always perpendicular to velocity, so that it does no work on the charged particle. The particle’s kinetic energy and speed thus remain constant. The direction of motion is affected but not the speed.

A negatively charged particle moves in the plane of the paper in a region where the magnetic field is perpendicular to the paper (represented by the small × ’s—like the tails of arrows). The magnetic force is perpendicular to the velocity, so velocity changes in direction but not magnitude. The result is uniform circular motion.

Refers to the attachment for the answer.

Let us assume that the object of mass m is kept on the Inclined plane.

Now, there will act one force called as Component of the Weight along the Incline which is given by the Relation,

mgsinθ,

where θ is the angle which the incline makes with the surface or Angle of the Incline.

Now, If there will be no friction and the object is moving along the incline

Force = mgsinθ

⇒ ma = mgsinθ

∴ a = gsinθ

This case is valid when the angle of the Incline is greater than the angle of repose, which means the object is moving with no cause or acing of the force.

But sometimes when the object does not move without the action of force, I mean that the angle of repose is greater than the angle of the incline, then we need to apply the force so that the object can move then,

Force applied = mgsinθ

∴ a = gsinθ

It will change the cases when friction is involved.

Now, For velocity, It can be found by using the equation of Motions. Time, Distance or initial velocity, etc must be given if the question will be asked related to the velocity. So by using them, you can find that.

Answer:

I'm not sure but I think it's 4.5 v

Answer:

Monthly energy cost = $47.52

Explanation:

Given the following data;

Voltage = 120 Volts

Current = 8 Ampere

Time = 15 hours

Energy cost = $0.11/KWh

To find the energy cost for a month;

First of all, we would determine the power rating of the microwave oven.

Power = current * voltage

Power = 8 * 120

Power = 960 Watts

Next, we find the amount of energy consumed;

Energy = power * time

Energy = 960 * 15

Energy = 14400 Watt-hour

To kilowatt per hour, we have;

Energy = 14400/1000 = 14.4 KWh

Now, we determine the monthly energy cost;

Daily energy cost = Energy consumption * cost

Daily energy cost = 14.4 * 0.11

Daily energy cost = $1.584

Therefore, monthly energy cost = 1.584 * 30

Monthly energy cost = $47.52

Or

Monthly energy cost = 14.4 * 0.11 * 30

Monthly energy cost = $47.52

Answer: [tex]0.985\times 10^{-4}\ T[/tex]

Explanation:

Given

Electron is accelerated 3.5 kV potential difference

Distance between plates d=29 mm

The potential difference between plates is V=100 V

here, the kinetic energy of an electron is acquired through a potential difference of 3.5 kV

[tex]\Rightarrow \dfrac{1}{2}m_ev^2=e\times 3.5\times 10^3\\\\\Rightarrow v=\sqrt{\dfrac{2\times 3.5\times 10^3e}{m_e}}=\sqrt{\dfrac{7\times 10^3\times 1.6\times 10^{-19}}{9.1\times 10^{-31}}}\\\\\Rightarrow v=\sqrt{1.23\times 10^{15}}=3.5\times 10^7\ m/s[/tex]

To move in a straight line Force due to magnetic field must be balanced by force due to charge

[tex]\Rightarrow F_B=F_q\\\\\Rightarrow evB=eE\\\\\Rightarrow B=\dfrac{E}{v}\\\\\Rightarrow B=\dfrac{\frac{V}{d}}{3.5\times 10^7}=\dfrac{\frac{100}{0.029}}{3.5\times 10^7}\\\\\Rightarrow B=\dfrac{3.448\times 10^3}{3.5\times 10^7}=0.985\times 10^{-4}\ T[/tex]

Answer:it B

Explanation:I took the test

Answer:

T = 2.83701481512 seconds

Explanation:

Hi!

The formula that you will want to use to solve this question is:

[tex]T = 2\pi *\sqrt{\frac{L}{g} }[/tex]

T--> period

L --> length of the pendulum

g --> acceleration due to gravity (9.8m/s^2)

since we know that the mass of the bob at the end of the pendulum does not affect the period of the pendulum, we can go ahead and ignore that bit of information (unless, of course, the weight causes the pendulum to stretch)

so now we can plug in our given info into the formula above and solve!

T = 2*pi * sqrt(2/9.8)

T = 2.83701481512 seconds

*Note*

- I used 3.14 to pi, if you need to use a different value for pi (a longer version, etc) your answer will be slightly different

I hope this helped!

Answer:

a. 0.332 W/m² b. 11.2 V/m c. 15.8 V/m

Explanation:

(a) the average intensity of the light,

Intensity, I = P/A where P = average power = 150.0 W and A = area through which the power emits = 4πr² where r = distance from bulb = 6 m.

So, I = P/A = P/4πr²

Substituting the values of the variables into the equation, we have

I =  P/4πr²

I =  150.0 W/4π(6 m)²

I =  150.0 W/4π(36 m²)

I =  150.0 W/452.39 m²

I =  0.332 W/m²

(b) the rms value of the electric field,

Since Intensity, I = E²/cμ₀ where E = rms value of electric field, c = speed of light = 3 × 10⁸ m/s and μ₀ = permeability of free space = 4π × 10⁻⁷ H/m.

Making E subject of the formula, we have

E² = Icμ₀

E = √(Icμ₀)

Since I = 0.332 W/m², substituting the other terms into the equation, we have

E = √(0.332 W/m² × 3 × 10⁸ m/s × 4π × 10⁻⁷ H/m.)

E = √(0.332 W/m² × 3 × 10⁸ m/s × 4π × 10⁻⁷ H/m.)

E = √(12.5 × 10)

E = √125 V/m

E = 11.18 V/m

E ≅ 11.2 V/m

(c) the peak value of the electric field.

The peak value of electric field, E' is gotten from E = E'/√2 where E = rms value of electric field.

So, E' = √2E

= √2 × 11.2 V/m

= 15.81 V/m

≅ 15.8 V/m

Answer:

The right approach is "1479°C".

Explanation:

The given values are:

Mass of iron piece,

[tex]m_p=42 \ kg[/tex]

Mass of iron bucket,

[tex]m_I=5 \ kg[/tex]

Mass of water,

[tex]m_w=10 \ kg[/tex]

Iron's specific heat,

[tex]C_I=470 \ J/Kg^{\circ}C[/tex]

Water's specific heat,

[tex]C_w=4186 \ J/Kg^{\circ}C[/tex]

Initial temperature,

[tex]t_I=23^{\circ}C[/tex]

Final equilibrium temperature,

[tex]T=150^{\circ}C[/tex]

Latent heat,

[tex]L_v=2260\times 10^3 \ J/Kg[/tex]

As we know,

The heat lost by the glowing piece of iron will be equal to the heat gain by the iron bucket as well as water, then

⇒ [tex]m_IC_I \Delta T=m_wC_w(100-23)+m_wL_v+m_bC_I(150-23)[/tex]

On substituting the given values, we get

⇒ [tex]42\times 420\times \Delta T=10\times 4186(100-23)+10(2260\times 10^3)+5\times 420(150-23)[/tex]

⇒ [tex]17640 \Delta T=3.22\times 10^6+2.26\times 10^7+2.667\times 10^5[/tex]

⇒          [tex]\Delta T=\frac{2.60867\times 10^7}{17640}[/tex]

⇒          [tex]\Delta T=1479^{\circ}C[/tex]

Increasing the number of resistors in a parallel branch, decreases the total resistance of the system.

Parallel resistive circuit is one where the resistors are connected to the same two points (or nodes) and is identified by the fact that it has more than one current path connected to a common voltage source.

As more and more resistors are added in parallel to a circuit, the equivalent resistance of the circuit decreases and the total current of the circuit increases.

To learn more about Parallel circuit here

https://brainly.com/question/11409042

#SPJ2

Answer:

b

Explanation:

sorry if im wrong plz no report.

Answer: B

Explanation: Friction and gravity change the motion.